Job description for the chief metrologist of the organization. Chief metrologist Job description of the enterprise metrologist

We bring to your attention a typical example of a job description for a metrologist, a sample of 2019/2020. Job description metrologist should include the following sections: general position, duties of a metrologist, rights and responsibilities of a metrologist.

1. General provision

A metrologist is a specialist who controls the measuring equipment and monitors the quality of products. This profession monitors the compliance of measuring instruments with established standards. Metrologists develop test schemes for measurements, various instructions. All devices must be in good working order and checked periodically. In addition to checking the devices located at the working enterprise, customer firms supply their devices for testing and adjustment. The metrologist accepts devices, draws them up, sends them for repair or adjustment. After the repair work and adjustment, informs customers about the work done and issues the device. Then, he compiles a list of equipment available at the enterprise for reporting by the Gosstandart authorities. The metrologist monitors the documentation so that it is up-to-date, taking into account the changes and additions made.

2. Job responsibilities of a metrologist

The metrologist is obliged to carry out organizational checks, repairs, and maintain documentation. Control the conformity of methods and measuring instruments. Carry out metrological examinations. Maintain a database of measuring instruments. Also, working at the enterprise, he controls the equipment of the enterprise with all measuring instruments. The metrologist is obliged to train personnel to work with measuring instruments. Engage in the development of new measuring instruments for their implementation in production. Metrologists are engaged not only in the verification of production equipment, but also in the verification of equipment documentation. All test results are prepared and the metrologist issues a conclusion based on the measurement and test results. The metrologist is obliged to know the technical requirements of the product, the technology of its production. Technical characteristics of instruments, features, principles of operation of measuring instruments, technology of their repair. Must know the standards of product certification, its storage, the basics of economics and labor legislation.

3. Rights of the metrologist

The metrologist has the right to inform his manager about all the shortcomings in the enterprise, have his opinion and report, and make recommendations for their elimination. Make your own proposals for improving the work provided for by job responsibilities. Personally request from the heads of the enterprise all the required documentation and information necessary for the implementation of its work. Has the right to require management to comply with organizational and technical conditions. And also, get acquainted with the documents on his position, get acquainted with the assessment of the quality of the position performed. Prohibit and withdraw from circulation measuring instruments that, for various reasons, have not passed certification, or due to inconsistency in the use of metrological rules. Has the right to monitor compliance with the norms, requirements, established metrological regulations.

4. Responsibility of the metrologist

There is a law to ensure the unity of measurement. This law guarantees the protection of the rights of citizens, from negative consequences, which were formed as a result of incorrect and low-quality measurements. The law operates on bringing violators to administrative and even criminal liability for punishment. Everything is very serious. There are penalties and warnings. The fine varies from 5 to 100 minimum wages. For repairs without a special license from 30 to 100 minimum wages. They are brought to criminal liability in the event of signs of a crime, which are provided for in accordance with the Criminal Code. If state supervision bodies, based on the results of inspections, insist on punishment, a criminal case may also be initiated. Responsibility for violations of metrological rules and norms is determined by the administration of the enterprise, relying on the Labor Code, which everyone must comply with.

Job description of a metrologist - sample 2019/2020. Duties of a metrologist, rights of a metrologist, responsibility of a metrologist.

Tags by material: Job description of a metrologist, job description of a metrologist of an enterprise. .

Type sample

APPROVE

___________________________________ (Surname, initials)
(name of organization, pre- ________________________
acceptance, etc., its organizational (body of a legal entity
legal form) (founders); face, fill
authorized to approve
job description)

"" ____________ 20__
m.p.

Job description
chief metrologist
______________________________________________
(name of organization, enterprise, etc.)

"" ____________ 20__ N__________

This job description has been developed and approved for
basis employment contract With __________________________________________
(name of the position of the person for whom
______________________________________________________ and in accordance with
this job description has been drawn up)
provisions of the Labor Code Russian Federation and other regulatory
acts governing labor relations In Russian federation.

1. General Provisions

1.1. Chief metrologist belongs to the leadership category.
1.2. A person who has
higher professional (technical) education and work experience in
majors in engineering and leadership positions on
metrological support of production for at least 5 years.
1.3. The chief metrologist is appointed to the position and dismissed from
it by order of the head of the enterprise and reports directly
________________________________________________________________________.
1.4. The chief metrologist must know:
- legislative and regulatory legal acts, methodical
materials on metrological support of production;
- profile, specialization and features
organizational and technological structure of the enterprise, its prospects
development;
- procedure and methods for planning work on metrological control
and ensuring production;
- organization of metrological support of production in the industry and
at the enterprise;
- production capacity, specifications,
design features and operating modes of the equipment, its rules
operation;
- basics of production technology of the enterprise;
- regulations, instructions, other guidelines for the development
and preparation of technical documentation;
- device and rules for the operation of measuring instruments, organizations
their repair;
- methods for conducting research and development in the field
improvement of metrological support and measuring instruments;
- the procedure for concluding contracts with third parties;
- advanced domestic and overseas experience in the area of
metrological control and production support;
- fundamentals of economics, labor organization, production and management,
fundamentals of labor legislation;
- rules and regulations of labor protection, safety measures,
and fire protection;
- internal labor regulations;
- _________________________________________________________________.
1.5. During the absence of the chief metrologist (illness, vacation,
business trip, etc.), his duties are performed by the deputy, and when
in the absence of such - a person appointed in the prescribed manner.
1.6. In his activities, the chief metrologist is guided by the charter
enterprise, orders of the head of the enterprise and this
job description.

2. Job responsibilities

Chief metrologist:
2.1. Organizes work on metrological support of development,

products.
2.2. Manages the preparation of projects and plans for implementation
new measuring equipment, organizational and technical measures for
increase of production efficiency, improvement of metrological
provision, means and methods of measurements, control and testing.
2.3. Provides the preparation of local verification schemes,
establishment of optimal frequency and development calendar schedules
verification of measuring instruments.
2.4. Leads the work on the metrological examination
design and other technical documentation developed on
enterprise, as well as coming from other enterprises and organizations.
2.5. Participates in ongoing research on automation
production processes associated with the use of measuring instruments, in
work to determine the needs of the enterprise in these funds.
2.6. Ensures the introduction of modern methods and measuring instruments,
as well as carrying out work on the assessment of measurement errors.
2.7. Organizes work on the analysis of the state of the metrological
providing, carrying out metrological certification of non-standardized
measuring instruments, development, coordination and approval of methods,
instructions and other regulatory and technical documentation for their verification, and
also certification of measuring instruments after restoration, repair,
verification.
2.8. Carries out control over the equipment of the technological process
all the measuring instruments provided for by the regulations, compliance
means and methods of measurement used in the divisions of the enterprise
requirements for compliance with the specified production modes and quality
products.
2.9. Organizes training terms of reference for design and
development of measuring instruments for special purposes.
2.10. Ensures the completion of the exchange fund of funds
measurements, tests and control, storage and comparison in the established
order of working standards, repair and maintenance in good condition
samples of measuring instruments.
2.11. Promotes the implementation of state and industry standards,
enterprise standards and other normative and technical documentation,
regulating standards of measurement accuracy, methods and means of verification.
2.12. Manages the preparation of established reports and
submitting it to the bodies of the state metrological service.
2.13. Organizes work to improve the skills of employees
metrological service.
2.11. Supervises the employees of the company
metrological control and metrological support of production.
2.15. _____________________________________________________________.

3. Rights

The chief metrologist has the right:
3.1. Represent the interests of the company in relations with others
structural subdivisions of the enterprise, other organizations for
issues related to the metrological support of development,
production, testing and operation of the company's
products.
3.2. Receive from managers and specialists of structural
divisions of the enterprise information related to the metrological
provision of the enterprise.
3.3. Issue orders, sign documents and conduct correspondence
with organizations and structural divisions of the enterprise on issues,
associated with the metrological support of the enterprise.
3.4. Require the management of the enterprise to assist in
fulfillment of their official duties and right.
3.5. ______________________________________________________________.

4. Responsibility

The Chief Metrologist is responsible for:
4.1. Per improper execution or failure to perform their duties
duties set out in this job description
within the limits determined by the labor legislation of the Russian Federation.
4.2. For offenses committed in the course of exercising their
activities - within the limits determined by administrative, criminal and
civil legislation of the Russian Federation.
4.3. For causing material damage - within the limits determined
the current legislation of the Russian Federation.
4.4. ______________________________________________________________.

The job description was developed in accordance with ________________
(Name,
_____________________________.
document number and date)

Head of structural unit (initials, surname)
_________________________
(signature)
"" _____________ 20__

AGREED:
Boss legal department

(initials, surname)
_____________________________
(signature)
"" ________________ 20__

I am familiar with the instruction: (initials, surname)
_________________________
(signature)
"" _____________ 20__

Job description of the chief metrologist

1. General Provisions

1. This job description defines the job duties, rights and responsibilities of the chief metrologist.

2. A person who has a higher professional (technical) education and at least 5 years of work experience in the specialty in engineering and technical and managerial positions in metrological support of production is appointed to the position of chief metrologist.

3. The chief metrologist must know the legislative and regulatory legal acts, teaching materials on metrological support of production; profile, specialization and features of the organizational and technological structure of the enterprise, prospects for its development; procedure and methods for planning work on metrological control and production support; organization of metrological support of production in the industry and at the enterprise; production capacities, technical characteristics, design features and operating modes of equipment, rules for its operation; fundamentals of production technology of the enterprise; regulations, instructions and other guidance materials on the development and execution of technical documentation; device and rules for the operation of measuring instruments, organization of their repair; methods for conducting research and development in the field of improving metrological support and measuring instruments; the procedure for concluding contracts with third parties; advanced domestic and foreign experience in the field of metrological control and production support; fundamentals of economics, organization of production, labor and management; fundamentals of labor legislation; labor protection rules and regulations.

4. The chief metrologist is appointed to the position and dismissed by the order of the head of the institution (enterprise, organization) in accordance with the current legislation of the Russian Federation.

5. The chief metrologist reports directly to the head of the institution (enterprise, organization).

2. Job responsibilities

Organizes work on metrological support for the development, production, testing and operation of products manufactured by the enterprise. Supervises the preparation of projects and plans for the introduction of new measuring equipment, organizational and technical measures to improve production efficiency, improve metrological support, means and methods of measurement, control and testing. Ensures the compilation of local verification schemes, the establishment of the optimal frequency and the development of calendar schedules for verification of measuring instruments. Leads the work on carrying out metrological examination of design and other technical documentation developed at the enterprise, as well as coming from other enterprises and organizations. Participates in ongoing research on the automation of production processes related to the use of measuring instruments, in the work to determine the needs of the enterprise for these means. Ensures the introduction of modern methods and measuring instruments, as well as the performance of work on the assessment of measurement errors. Organizes work on the analysis of the state of metrological support, carrying out metrological certification of non-standardized measuring instruments, development, coordination and approval of methods, instructions and other regulatory and technical documentation for their verification, as well as certification of measuring instruments after restoration, repair, verification. Carries out control over the equipment of the technological process with all the measuring instruments provided for by the regulations, the compliance of the measuring instruments and methods used in the divisions of the enterprise with the requirements for compliance with the specified production modes and product quality. Organizes the preparation of technical specifications for the design and development of special-purpose measuring instruments. Ensures the completion of the exchange fund of measuring instruments, testing and control, storage and comparison in the prescribed manner of working standards, repair and maintenance of samples of measuring instruments in proper condition. Promotes the implementation of state and industry standards, enterprise standards and other normative and technical documentation regulating measurement accuracy standards, methods and means of verification. Supervises the work on the preparation of the established reporting and its submission to the bodies of the state metrological service. Organizes work to improve the skills of metrological service employees. Supervises the employees of the enterprise who carry out metrological control and metrological support of production.

3. Rights

The chief metrologist has the right:

1. give orders that are obligatory for execution by employees subordinate to him;

2. participate in the selection and placement of personnel for their activities;

3. make proposals to the management on encouraging and imposing penalties on the employees of the enterprise in their activities;

4. make proposals for the development and improvement of the enterprise;

5. request from the management, receive and use information materials and legal documents necessary for the performance of their duties;

6. to take part in conferences and meetings at which issues related to its work are considered;

7. pass certification in accordance with the established procedure with the right to receive the appropriate qualification category;

8. improve your skills.

The chief metrologist uses all labor rights in accordance with the Labor Code of the Russian Federation.

CHIEF METROLOGIST

1. General Provisions

1.1. This job description defines the job duties, rights and responsibilities of the person holding the position of chief metrologist.

1.2. The chief metrologist is appointed to a position or dismissed from work by order in agreement with the chief engineer.

1.3. The chief metrologist reports directly to the chief engineer.

1.4. The chief metrologist must know:

— Job description of the chief metrologist;

— Regulations on the metrology service;

— Federal Law No. 190-FZ of July 27, 2010 “On Heat Supply”;

— Order of the Ministry of Energy of Russia dated March 24, 2003 No. 115 “On approval of the Rules for the technical operation of thermal power plants” (Registered in the Ministry of Justice of the Russian Federation on April 2, 2003 No. 4358);

— Order of the Ministry of Labor of Russia dated August 17, 2015 No. 551n “On approval of the Rules for labor protection during the operation of thermal power plants”;

— Order of the Ministry of Labor of Russia dated August 17, 2015 No. 552n “On approval of the Rules for labor protection when working with power tools and devices”;

- Rules for the commercial accounting of thermal energy, coolant, approved. Decree of the Government of the Russian Federation of November 18, 2013 No. 1034;

— Order of the Ministry of Labor of Russia dated July 24, 2013 No. 328n “On approval of the Rules for labor protection during the operation of electrical installations” (Registered in the Ministry of Justice of Russia on December 12, 2013 No. 30593);

— Instructions for providing first aid in case of accidents at the production site of RAO UES of Russia. Order of RAO "UES of Russia" dated 21.06.2007;

— Technical documentation for the main and auxiliary equipment installed in boiler rooms;

— Orders, orders and other internal local regulations;

— Information letters and other instructions from supervisors public services.

- Order of the Ministry of Energy of the Russian Federation dated 07/08/2002 No. 204 "Rules for the installation of electrical installations".

- Law of the Russian Federation of April 27, 1993 No. 4871-I "On ensuring the uniformity of measurements";

— Instructions for the investigation and accounting of technological violations in the operation of power systems, power plants, boiler houses, electrical and heat networks (RD 153-34.0-20.801-00);

— Instructions for the prevention and elimination of accidents in the electrical part of power systems (SO 15334.20.561-2003);

— The scope and standards of electrical equipment testing (SO 34.45-51.300-97);

— Federal Law No. 261-FZ of November 23, 2009 (as amended on July 13, 2015) “On Energy Saving and Improving Energy Efficiency and on Amendments to Certain Legislative Acts of the Russian Federation”;

- Federal Law of December 21, 1994 No. 69-FZ "On fire safety»;

- Federal Law of July 22, 2008 No. 123-FZ " Technical regulation on fire safety requirements”;

- Decree of the Government of the Russian Federation of 04.25.2012 No. 390 (as amended on 06.03.2015) "On the fire regime" (together with the "Rules for the fire regime in the Russian Federation");

- Order of the Ministry of Emergency Situations of the Russian Federation of December 12, 2007 No. 645 (as amended of June 22, 2010) “On approval of the Fire Safety Standards “Training fire safety measures for employees of organizations” (Registered in the Ministry of Justice of the Russian Federation on January 21, 2008 No. 10938);

— Labor Code Russian Federation dated December 30, 2001 No. 197-FZ;

— Federal Law No. 426-FZ dated December 28, 2013 “On special evaluation working conditions”;

— Federal Law No. 125-FZ dated July 24, 1998 “On Mandatory social insurance from accidents at work and occupational diseases;

— Order of the Ministry of Health and Social Development of Russia dated 06/01/2009 No. 290n (as amended on 01/12/2015) "On approval of the Intersectoral Rules for Providing Workers with Special Clothing, Special Footwear and Other Personal Protective Equipment" (Registered in the Ministry of Justice of Russia on 09/10/2009 No. 14742);

— Rostekhnadzor Order No. 542 dated November 15, 2013 “On Approval of Federal Norms and Rules in the Field of Industrial Safety “Safety Rules for Gas Distribution and Gas Consumption Networks”. (Registered in the Ministry of Justice of Russia on December 31, 2013 No. 30929);

— Order of Rostekhnadzor dated January 29, 2007 No. 37 (as amended on December 6, 2013) “On the procedure for training and certification of employees of organizations supervised Federal Service on Environmental, Technological and Nuclear Supervision" (together with the "Regulations on the organization of work on the training and certification of specialists from organizations supervised by the Federal Service for Environmental, Technological and Nuclear Supervision", "Regulations on the organization of training and testing the knowledge of workers' organizations supervised by the Federal Service for Environmental, Technological and Nuclear Supervision”) (Registered in the Ministry of Justice of Russia on March 22, 2007 No. 9133);

- Order No. 302n dated 12.04.2011. Ministry of Health and social development RF "On approval of lists of harmful and (or) hazardous production factors and work, during the performance of which preliminary and periodic medical examinations (examinations) are carried out, and the procedure for conducting mandatory preliminary and periodic medical examinations(surveys) of workers engaged in hard work and work with harmful and (or) hazardous conditions labor";

– Methodological and regulatory materials on the metrological support of production;

— Organization of metrological support of production;

— Standards and other regulatory documents for metrological certification of products, operation, repair, adjustment, verification, adjustment and storage of measuring instruments;

- Technical requirements for products manufactured by the enterprise, the technology of its production;

- Technical characteristics, design features, purpose and principles of operation of measuring instruments, technology for their repair;

— Methods for performing measurements;

— The procedure for attestation and certification of products;

— Advanced domestic and foreign experience in the field of metrological control and production support;

– Basic requirements for the organization of labor in the design;

— Order of definition economic efficiency introduction of new methods and measuring instruments;

1.5. During the absence of the Chief Metrologist, his duties are performed by a person appointed by the Order in the prescribed manner.

1.6. A person with a higher (technical) education and work experience in the specialty of at least 3 years is appointed to the position of Chief Metrologist;

1.7. The primary appointment of a newly appointed chief metrologist is carried out no later than one month after appointment to the position.

1.8. The frequency of certification and verification of the knowledge of the chief metrologist is established by the relevant regulatory acts of the Russian Federation.

2. Job responsibilities

The Chief Metrologist performs the following duties:

2.1. Organizes work on metrological support for the development, production, testing and operation of products manufactured by the enterprise.

2.2. Supervises the preparation of projects and plans for the introduction of new measuring equipment, organizational and technical measures to improve production efficiency, improve metrological support, means and methods of measurement, control and testing.

2.3. Ensures the compilation of local verification schemes, the establishment of the optimal frequency and the development of calendar schedules for verification of measuring instruments.

2.4. Leads the work on carrying out metrological examination of design and other technical documentation developed at the enterprise, as well as coming from other enterprises and organizations.

2.5. Participates in ongoing research on the automation of production processes related to the use of measuring instruments, in the work to determine the needs of the enterprise for these means.

2.6. Ensures the introduction of modern methods and measuring instruments, as well as the performance of work on the assessment of measurement errors.

2.7. Organizes work on the analysis of the state of metrological support, carrying out metrological certification of non-standardized measuring instruments, development, coordination and approval of methods, instructions and other regulatory and technical documentation for their verification, as well as certification of measuring instruments after restoration, repair, verification.

2.8. Carries out control over the equipment of the technological process with all the measuring instruments provided for by the regulations, the compliance of the measuring instruments and methods used in the divisions of the enterprise with the requirements for compliance with the specified production modes and product quality.

2.9. Issues instructions aimed at preventing, stopping or eliminating violations of metrological rules and norms in the metering stations for thermal energy, the consumer's coolant.

2.10. Issues instructions aimed at preventing, stopping or eliminating violations of metrological rules and standards at heat supply sources.

2.11. Organizes the preparation of technical specifications for the design and development of special-purpose measuring instruments.

2.12. Ensures the completion of the exchange fund of measuring instruments, testing and control, storage and comparison in the prescribed manner of working standards, repair and maintenance of samples of measuring instruments in proper condition.

2.13. Promotes the implementation of state and industry standards, enterprise standards and other normative and technical documentation regulating measurement accuracy standards, methods and means of verification.

2.14. Supervises the work on the preparation of the established reporting and its submission to the bodies of the state metrological service.

2.15. Organizes work to improve the skills of workers of the metrological service, in agreement with the employer.

2.16. Performs work in the field of labor protection and ensuring the fire regime. Creates healthy and safe working conditions, normal conditions for rest. Provides a high culture of production, proper sanitary condition of service premises.

2.17. Fulfills the instructions of the labor protection service, State supervision services in a timely manner.

2.18. Manages the production and economic activities of the service.

2.19. Provides timely reporting on the production and economic activities of the service.

2.20. Conducts work with personnel in accordance with regulatory and legal acts.

2.21. Complies with the requirements of the rules on labor protection, fire and industrial safety.

3. Rights

In the course of his activities, the Chief Metrologist has the right to:

3.1. Act on behalf of the metrology service, represent the interests of the enterprise in relations with the structural divisions of the enterprise, state metrological control and supervision bodies, and other bodies state power on issues of metrological support of production.

3.2. Make proposals to the head of the enterprise on the conclusion of agreements on the lease of unique measuring instruments and test equipment for calibration and other metrological work, as well as agreements on the involvement of third-party specialists in the metrological examination of documentation and metrological certification and the introduction of measurement methods.

3.3. Ask for assistance from the heads of structural divisions and independent specialists in providing the information necessary to perform work on metrological control and metrological support of production.

3.4. Participate in the preparation of draft orders, instructions, instructions on the issues of metrological support of production.

3.5. Give recommendations to the heads of structural divisions of the enterprise on issues of metrological control and production support.

3.6. Submit proposals for prosecution in the prescribed manner officials guilty of violating the rules for the use of measuring instruments, the procedure for metrological support of production.

3.8. Submit for consideration by the head of the enterprise:

3.8.1. Representations about the appointment, transfer and dismissal of subordinate employees.

3.8.2. Proposals to encourage distinguished employees, to bring to material and disciplinary liability violators of production and labor discipline.

3.9. Approval and sign documents within their competence.

3.10. Independently conduct correspondence with the structural divisions of the organization, as well as other organizations on issues within its competence and not requiring the participation of the head of the enterprise.

4. Responsibility

The Chief Metrologist is responsible for:

4.1. Untimely and poor-quality performance of their duties, provided for by the job description of the chief metrologist.

4.2. Non-fulfillment of work plans, its volumes, deadlines and quality.

4.3. The results and effectiveness of their production activities.

4.4. Reliability of information about the results of the work carried out.

4.5. Failure to comply with orders, directives and orders of management.

4.6. Failure to comply with the rules of internal labor regulations and labor discipline.

4.7. Violation of the rules on, and, as well as other regulatory and legal acts that pose a threat to the activities of the enterprise and its employees.

4.8. The quality and timeliness of the tasks and functions assigned by the job description to the chief metrologist.

5. Relationships

When fulfilling their functional duties The chief metrologist carries out the following relationships:

5.1. With chief engineer and director

Gets:

- tasks or orders for the performance of work.

Transmits:

— information in the form of acts and reports with conclusions and proposals;

— schedules and scope of work;

- information about the work done;

- reporting documentation.

5.2. With Head of HR

Gets:

- signed vacation schedules;

- information about employees of the service.

Transmits:

- memos for employees of the enterprise called to work due to production needs;

- sick leave records of staff.

5.3. with supply department

Gets:

- tools, personal protective equipment from the warehouse, according to the submitted applications.

Transmits:

- applications for essential tool, personal protective equipment approved by the chief engineer.

5.4. With third parties (consumer representatives, contractors)

Gets:

— technical documentation;

- applications for checking the operation of metering devices;

- reports on the consumption of thermal energy, coolant to analyze the correct operation of metering devices.

Transmits:

- certificates of admission;

— acts of defects;

- technical documentation.

5.5. with sales department

Gets:

- information on the availability of heating and hot water metering devices put into operation by consumers;

Transmits:

- acts of admission or prohibition;

- reports on the consumption of thermal energy, coolant.

5.6. with legal department

Gets:

— information about concluded agreements (contracts);

Transmits:

- information for the conclusion of agreements (contracts) for the maintenance of metering devices;

— information on the transfer of technical documentation.

5.7. With production and technical department

Gets:

— information on connection schemes for heat supply facilities;

— information about sources of heat supply;

— technical conditions and design documentation for connecting metering units.

Transmits:

- technical documentation.

5.8. With the service of adjustment, testing and modes

Gets:

- information on the detection of faults in the measurement of heat energy metering devices, coolant;

— information on the detection of violations in the internal heat supply system and hot water supply and on heat supply sources;

— information about connected heat supply facilities;

- acts and regulations based on the results of the survey of heat consumption systems;

- instrumentation for verification.

Transmits:

— reports on the consumption of thermal energy, coolant;

- information on the availability of metering devices at consumers, at sources of heat supply;

— certified instrumentation;

- information on the elimination of violations in the operation of metering devices at the consumer and at heat supply sources.

5.9. With operational dispatch service

Gets:

- information about disconnected and connected power supply facilities;

— information on connection and disconnection of thermal energy consumers in connection with the beginning of the heating season and at its end;

— information on the timing of planned shutdowns of heat sources;

— information on interruptions in the supply of thermal energy to consumers as a result of emergencies;

— information on switching heat supply sources;

- information about violations in the operation of metering devices at heat supply sources;

- daily schedule of the operation of heat networks and heat sources based on the weather forecast for the next day, issued by the meteorological service.

Transmits:

— reports on the consumption of thermal energy, coolant;

5.10. With accounting

Gets:

- pay slips wages;

- material report;

— information on service contracts and payment for them;

- information on debts on payment for servicing consumer metering devices.

Transmits:

- acts for the write-off of material assets;

- invoices for the internal movement of material;

- information on the work performed under the contracts;

- other documents on request.

5.11. With the service of the chief power engineer

Gets:

- instrumentation for verification;

Transmits:

— trusted instrumentation;

- information on the elimination of violations in the operation of metering devices at heat supply sources.

5.12. With the heads of boiler houses

Gets:

— Necessary operational information about the state of equipment for carrying out adjustment works metering devices at heat supply sources;

- information about violations in the operation of metering devices at heat supply sources.

Transmits:

- information on the operation of metering devices at heat supply sources;

- information on the elimination of violations in the operation of metering devices at heat supply sources.

5.13. With the labor protection service

Gets:

— information on current and newly introduced normative and legal acts on labor protection, industrial and fire safety;

— regulatory and legal acts on labor protection, industrial and fire safety;

— information letters, operational instructions and other materials of controlling public services in the field of labor protection, industrial and fire safety;

— guiding documents (orders, orders, regulations…);

— the standard for providing personnel with personal protective equipment;

- instructions, measures to eliminate the comments identified during inspections of workplaces;

— measures to improve working conditions;

- schedules for checking the knowledge of managers;

— information about fires and injuries;

— directive documents regulating the relationship to ensure labor safety.

Transmits:

— reports on the implementation of instructions;

— reports on the implementation of orders, directive documents and other measures to improve the reliability of equipment operation, improve the state of labor protection, fire and industrial safety;

- acts, schedules, programs, lists, etc.;

— explanatory notes on issues of violation of the requirements of regulatory and legal acts on labor protection, industrial and fire safety.

Conforms to the requirements of the document - "DIRECTORY qualification characteristics occupations of workers. Issue 1. Occupations of workers that are common to all types economic activity", which was approved by order of the Ministry of Labor and social policy Ukraine dated December 29, 2004 N 336.
The status of the document is "valid".

Preface to job description

0.1. The document comes into force from the moment of its approval.

0.2. Document developer: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

0.3. Document approved: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

0.4. Periodic verification of this document is carried out at intervals not exceeding 3 years.

1. General Provisions

1.1. The position "Chief metrologist" belongs to the category "Managers".

1.2. Qualification requirements - complete higher education relevant area of training (master, specialist). Work experience in the professions of lower-level managers of the relevant professional area: for a master's degree - at least 2 years, for a specialist - at least 3 years.

1.3. Knows and applies:
- legislative and regulatory legal acts, methodological materials on the metrological support of production;
- profile, specialization and features of the organizational and technological structure of the enterprise, prospects for its development, the procedure and methods for planning work on metrological control and production support;
- organization of metrological support of production in the industry and at the enterprise;
- production capacities, technical characteristics, design features and operating modes of equipment, rules for its operation;
- basics of production technology of the enterprise;
- regulations, instructions and other guidance materials on the development and execution of technical documentation;
- device and rules for the operation of measuring instruments, organization of their repair;
- methods for conducting research and development to improve metrological support and measuring instruments;
- the procedure for concluding contracts with third parties;
- advanced domestic and world experience in metrological control and production support;
- fundamentals of economics, organization of production, labor and management;
- Fundamentals of labor law.

1.4. The chief metrologist is appointed to the position and dismissed by order of the organization (enterprise / institution).

1.5. The Chief Metrologist reports directly to _ _ _ _ _ _ _ _ _ _ .

1.6. The chief metrologist directs the work _ _ _ _ _ _ _ _ _ _ .

1.7. The chief metrologist during his absence is replaced by a duly appointed person who acquires the appropriate rights and is responsible for the proper performance of the duties assigned to him.

2. Description of work, tasks and job responsibilities

2.1. Organizes work on metrological support for the development, production, testing and operation of products manufactured by the enterprise.

2.3. Ensures the compilation of local verification schemes, the establishment of the optimal frequency and the development of calendar schedules for verification of measuring instruments.

2.4. Leads the work on carrying out metrological examination of design and other technical documentation developed at the enterprise, as well as coming from other enterprises and organizations.

2.5. Participates in tests on the automation of production processes related to the use of measuring instruments, in the work to determine the needs of the enterprise for these means.

2.6. Ensures the introduction of modern methods and measuring instruments, as well as the performance of work on the assessment of measurement errors.

2.9. Organizes the preparation of technical specifications for the design and development of special-purpose measuring instruments.

2.10. Provides a complete set of the exchange fund of measuring instruments, testing and control, preservation and reconciliation in the prescribed manner of working standards, repair and maintenance of samples of measuring instruments in proper condition.

2.11. Promotes the implementation of state and industry standards, enterprise standards and other normative and technical documentation that regulates measurement accuracy standards, methods and means of verification.

2.12. Supervises the work on the preparation of the established reporting and its submission to the bodies of the state metrological service.

2.13. Organizes work to improve the skills of metrological service employees.

2.14. Supervises the employees of the enterprise who carry out metrological control and metrological support of production.

2.15. Knows, understands and applies the current regulatory documents relating to its activities.

2.16. Knows and fulfills the requirements of regulatory acts on labor and environmental protection, complies with the norms, methods and techniques for the safe performance of work.

3. Rights

3.1. The chief metrologist has the right to take action to prevent and eliminate the occurrence of any violations or inconsistencies.

3.2. The chief metrologist has the right to receive all social guarantees provided for by law.

3.3. The chief metrologist has the right to demand assistance in the performance of his duties and the exercise of rights.

3.4. The chief metrologist has the right to demand the creation of organizational and technical conditions necessary for the performance of official duties and the provision necessary equipment and inventory.

3.5. The chief metrologist has the right to get acquainted with the draft documents relating to his activities.

3.6. The chief metrologist has the right to request and receive documents, materials and information necessary for the performance of his duties and orders of the management.

3.7. The chief metrologist has the right to improve his professional qualifications.

3.8. The chief metrologist has the right to report all violations and inconsistencies identified in the course of his activities and make proposals for their elimination.

3.9. The chief metrologist has the right to get acquainted with the documents that define the rights and obligations of the position held, the criteria for assessing the quality of the performance of official duties.

4. Responsibility

4.1. The chief metrologist is responsible for non-fulfillment or untimely fulfillment of the duties assigned by this job description and (or) non-use of the rights granted.

4.2. The chief metrologist is responsible for non-compliance with the rules of internal labor regulations, labor protection, safety, industrial sanitation and fire protection.

4.3. The chief metrologist is responsible for disclosing information about the organization (enterprise/institution) that is a trade secret.

4.4. The chief metrologist is responsible for non-fulfillment or improper fulfillment of the requirements of internal normative documents organizations (enterprises/institutions) and legal orders of management.

4.5. The chief metrologist is responsible for offenses committed in the course of his activities, within the limits established by the current administrative, criminal and civil legislation.

4.6. The chief metrologist is responsible for causing material damage to the organization (enterprise/institution) within the limits established by the current administrative, criminal and civil legislation.

4.7. The chief metrologist is responsible for the misuse of the granted official powers, as well as their use for personal purposes.