Miner job description. Underground miner job description Job responsibilities of a miner at a coal warehouse

Section `` General professions mining and mining capital works`` Section `` General professions of works on beneficiation, agglomeration, briquetting`` Section `` Extraction and preparation of coal and shale, construction of coal and shale mines and open-pit mines`` Section `` Construction of subways, tunnels and underground structures of special purposes`` Section `` Extraction and processing of ore and placer minerals`` Section `` Agglomeration of ores`` Section `` Extraction and processing of mining chemical raw materials`` Section `` Extraction and processing building materials`` Section '' Extraction and processing of peat`` Section '' Processing of brown coal and ozokerite ores``((ETKS # 4))

§ 23. Underground miner (3rd grade)

3rd rank

Description of the work. Reception of fasteners, explosive, construction, lubricants, spare parts and equipment at the shaft, pit or borehole, loading and unloading them manually or with the help of rigging mechanisms and devices into trolleys, platforms, buckets, cages; delivery through mine workings to the destination, from site to site, to the shaft (pit), delivery from the mine. Carrying out, fastening, restoration and cleaning of drainage, drainage ditches and wells manually from rock and sludge, sludge removal, haulage of loaded trolleys. Maintenance of equipment during the production of drainage works. Inspection of the condition of mine workings, trimming the sides and roof using a perforator, jackhammer or manually, minor repairs of rock drills and jackhammers. Cleaning of trolleys from adhered and compressed mass using pneumatic tools. Assistance to the electric locomotive driver in the production of shunting work. Execution of works on underground devices. Tightening the sides and roof of the workings, replacing the puffs, backfilling the voids behind the support. Soil support and side stripping. Preparation of a cut for lintels. Construction of all types of lintels and their repair. Installation and repair of ventilation doors, windows, metering stations, wooden boards, pipes, barriers, scaffolds. Installation of door frames, door hinge, installation of shelving. Manufacturing, installation, disassembly and repair of ladders, hatches, stairs, shelves, fences, railings, bunkers in mine workings with an angle of inclination up to 45 °. Sheathing of ventilation shafts in mines. Procurement of rods, preparation of concrete mix, delivery to the place of work. Rebar tying, installation and cementing of bolts, hooks. Selection and procurement of support and formwork elements. Delivery of rock by trolleys to the place of dry filling of the worked-out space. Release of rock from ore slopes, rising funnels and passing it through screens into a bunker or ore pass, breaking up oversized items, building up ore passes. Manual drilling of boreholes and underbores. Harvesting and driving plugs into drilled holes. Selection of drills and bits. Participation under the guidance of a blaster in loading boreholes, blast holes, mine chambers with the delivery of explosives to the place of blasting operations. Cleaning of sump, catcher chambers (under the cage, skips), water collectors from silt, spilled rock mass with loading into trolleys and unloading from them. Breakdown of large pieces of rock. Cleaning of conveyor strings of scraper and belt conveyors. Participation in the replacement of pans and chains on conveyors, replacement of drums. Participation in the repair of belt conveyors. Maintenance of water barriers (carrying, delivery, installation of a container, filling with water). Collection, loading and unloading of scrap metal in the mine. Implementation of works to prevent and extinguish fires in coal and shale mines: assembly, disassembly, transportation, laying of pipe strings; preparation of a cut for lintels, drilling boreholes, fastening workings, ditches and wells different kinds lining, coal and rock excavation in the zone of the burning massif. Execution of auxiliary works during excavation and stope excavation of minerals.

Must know: device Vehicle, devices used when loading heavy parts and equipment; varieties, species and sizes of forest materials; methods and rules for conducting and fixing drainage, drainage ditches and wells in various conditions; methods and rules of rigging; purpose and arrangement of jumpers different types; methods and techniques for extinguishing burning coal; rules for conducting work when burning coal in mine workings; scheme of local and mine drainage; rules for loading boreholes, boreholes, mine chambers; device and location of water collectors, sump; work schedules of stands and skips; device and purpose of shelves, ladders, ladders, hatches and other arrangements of mine workings, methods of implementation carpentry in mine; mechanical properties and types of wood of various species; types and types of used support; rules for performing locksmith and installation works to the extent required for work; basic information about the device of gas-cutting equipment.

This job description translated automatically. Please note that automatic translation does not provide 100% accuracy, therefore there may be minor translation errors in the text.

Preface to job description

0.1. The document comes into force from the moment of its approval.

0.2. Document developer: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

0.3. The document has been agreed upon: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

0.4. This document is periodically checked at intervals not exceeding 3 years.

1. General Provisions

1.1. The position "Underground miner of the 3rd category" belongs to the category "Workers".

1.2. Qualification requirements - complete or basic general secondary education. Vocational education without requirements for work experience or obtaining a profession directly in production, advanced training and work experience underground miner 2 categories for at least 1 year.

1.3. Knows and applies in activities:
- the structure of vehicles, equipment, devices, machines, electrical and pneumatic tools that are used in the course of work;
- varieties, wood species and sizes of forest materials;
- methods and rules for conducting and fixing drainage, drainage ditches and wells in various conditions;
- techniques and rules of rigging;
- purpose and structure of jumpers of various types;
- scheme of district and mine drainage: the structure and placement of water intake, sump;
- work schedules of lifting stands and skips, the structure and purpose of platforms, ladders, ladders, hatches and other equipment of mine workings;
- ways of doing carpentry work in the mine;
- mechanical properties and varieties of trees of various species;
- types and types that are used in the work;
- works on construction and repair of fastening;
- characteristics of mine workings of various types;
- methods of driving horizontal, inclined and vertical workings and shafts;
- features of the construction and repair of equipment for running sections of mine workings with an inclination angle of more than 45 degrees;
- physical properties of rocks;
- communication schemes of pipelines;
- schedules for the organization of work on the reinforcement of mine shafts;
- dimensions of buckets, sockets, pipes passing through the platform;
- construction constant path subway;
- the basics of electrical engineering and plumbing.

1.4. An underground miner of the 3rd category is appointed and dismissed by order of the organization (enterprise / institution).

1.5. An underground miner of the 3rd category reports directly to _ _ _ _ _ _ _ _ _ _.

1.6. An underground miner of the 3rd category supervises the work of _ _ _ _ _ _ _ _ _ _.

1.7. An underground miner of the 3rd category during his absence is replaced by a person appointed in established order, which acquires the corresponding rights and is responsible for the proper performance of the duties assigned to it.

2. Description of work, tasks and duties

2.1. Performs reception in a mine shaft, pit or well of fasteners, explosives, construction materials, lubricants, spare parts and equipment.

2.2. Loads and unloads them manually or with the use of rigging mechanisms, devices and loading machines into trolleys, to platforms, to buckets, lifting cages and delivers them by mine workings to their destination, from site to site, to a mine shaft (pit), delivery from the mine ...

2.3. Supervises drainage machines during the reconstruction of drainages, drainage ditches and wells.

2.4. Performs fastening, restoration and cleaning of drainage, drainage ditches and wells manually from rock and various waste materials; removes sludge.

2.5. Inspects the condition of mine workings, selects sides and roofs using a perforator, jackhammer.

2.6. Cleans the trolleys from adhesion of rocks using a pneumatic tool.

2.7. Assists the electric locomotive driver in carrying out shunting work.

2.8. Carries out work on underground decoration.

2.9. Tightens the sides and the roof of the mine, replaces the tightening, back-up cavities outside with fasteners.

2.10. A cut for the lintels is being prepared.

2.11. Produces all types of lintels and repairs them.

2.12. Picks up soil and cleans the sides of the mine.

2.13. Arranges and repairs ventilation panels, windows, measuring stations, wooden panels, pipes, barriers, platforms, scaffolding.

2.14. Manufactures, installs, dismantles and repairs ladders, hatches, ladders, scaffolding, protective equipment, handrails, bunkers in mine workings with an inclination angle of up to 45 degrees.

2.15. Sheaths ventilation shafts of mines.

2.16. Prepares rods, concrete mix, mortar and delivers to the place of work.

2.17. Conducts spraying of concrete with a gunning apparatus, compacts concrete with an electric vibrator.

2.18. He selects and prepares fasteners and formwork.

2.19. Delivers the rock by trolleys to the dry place of the mined-out space filling.

2.20. It releases rock from ore skates with its bypass through a screen to a bunker or ore pass, breaks oversized, increases ore pass.

2.21. Performs manual drilling of boreholes and boreholes.

2.22. Prepares and drives chops into drilled holes.

2.23. Picks up storms and crowns.

2.24. Takes part, under the guidance of a demolition man, in charging wells, bore holes, mine chambers with the delivery of explosives to the place of blasting operations.

2.25. Cleans sump, trapping chambers (under the lifting cage, skip), water collection from silt, scattered rock mass with a load to trolleys and unloading from them.

2.26. Develops rock workings with a jackhammer.

2.27. Breaks up large pieces of rock.

2.28. Extends and shortens pipelines.

2.29. Leads the work site to a safe state before work commences and throughout the shift.

2.30. Performs fastening and assembly and dismantling works outside the cleaning space.

2.31. Performs work on a suspended platform during excavation or deepening of vertical shaft shafts: passing buckets, materials, equipment through the bells of the suspended platform; passing the pipes through the feet of the platform during the lifting of the platform or putting the pipes.

2.32. Knows, understands and applies the current regulatory documents related to his activities.

2.33. Knows and fulfills the requirements of regulatory enactments on labor and environmental protection, complies with the norms, methods and techniques for the safe performance of work.

3. Rights

3.1. An underground miner of the 3rd category has the right to take action to prevent and eliminate cases of any violations or inconsistencies.

3.2. An underground miner of the 3rd category has the right to receive all social guarantees provided for by law.

3.3. An underground miner of the 3rd category has the right to demand assistance in the performance of his official duties and the exercise of his rights.

3.4. An underground miner of the 3rd category has the right to demand the creation of organizational and technical conditions necessary for the performance of official duties and the provision of necessary equipment and inventory.

3.5. An underground miner of the 3rd category has the right to get acquainted with the draft documents relating to his activities.

3.6. An underground miner of the 3rd category has the right to request and receive documents, materials and information necessary for the performance of his official duties and orders of the management.

3.7. An underground miner of the 3rd category has the right to improve his professional qualifications.

3.8. An underground miner of the 3rd category has the right to report all violations and inconsistencies identified in the course of his activity and make proposals for their elimination.

3.9. An underground miner of the 3rd category has the right to familiarize himself with the documents defining the rights and obligations of the position held, the criteria for assessing the quality of the performance of official duties.

4. Responsibility

4.1. An underground miner of the 3rd category is responsible for non-fulfillment or untimely fulfillment of the duties assigned by this job description and (or) non-use of the granted rights.

4.2. An underground miner of the 3rd category is responsible for non-compliance with the rules of internal labor regulations, labor protection, safety, industrial sanitation and fire protection.

4.3. An underground miner of the 3rd category is responsible for disclosing information about an organization (enterprise / institution) related to a trade secret.

4.4. An underground miner of the 3rd category is responsible for non-performance or improper performance requirements of internal normative documents organizations (enterprises / institutions) and legal orders of the management.

4.5. An underground miner of the 3rd category is responsible for offenses committed in the course of his activities, within the limits established by the current administrative, criminal and civil legislation.

4.6. An underground miner of the 3rd category is responsible for causing material damage to an organization (enterprise / institution) within the limits established by the current administrative, criminal and civil legislation.

4.7. An underground miner of the 3rd category is responsible for the misuse of the granted official powers, as well as their use for personal purposes.

The profession of a miner is something mysterious for people who have not been faced with the work of a mine. The image of a miner, in the minds of many people, is a man who is dirty to blackness, who somewhere deep underground, with the help of a pickaxe, extracts coal. Then, he pushes a small trailer loaded with coal to the surface of the earth. About 100 years ago, this process looked like this. The development of technology, this whole process has greatly simplified.

Artem Svetlov / flickr

What is a modern mine?

The underground part of the mine consists of tunnels, which are located horizontally, vertically and at an angle. They are called - workings. Mine terminology is rich in specific names that do not mean anything to an uninitiated person. This also applies to the name of the workings. Depending on the purpose, they have their own names: drift, cross, slope, trunk, furnace, adit (many have heard this name in films and cartoons).

People descend into the mine either along a vertical shaft in a cage (like in an elevator), or along an inclined shaft in platforms resembling children's carriages. Further, everyone disperses through the mine workings to their jobs. The distance of the workplace from the trunk can reach 5-7 km.

Coal is mined using coal miners in workings called - lava. But at the same time, there are still mines where coal is mined by the method of our grandfathers - jackhammers. From the longwall, coal is transported by a rope to the nearest mine, where it is poured either onto the next conveyor (looks like a conveyor belt at the checkout in a supermarket), or into carriages, which are pushed further by an electric locomotive. Coal is delivered to the surface either along inclined workings by conveyors, or along a vertical shaft with skips (a huge lift).

What professions are there in the mine?

- this is not the name of the profession. This word is used for all people working underground. But there are many professions in the mine, each with a specific job performance. The most common are:

- GROZ (a mine working face) - these people are directly involved in coal mining, they maintain and repair mechanisms that extract coal, fix the "roof" (rock mass that is overhead) so that it does not collapse, etc .;

- tunnellers - make tunnels (workings) along the mine, through which coal, fresh air, people will be transported later;

- Hydraulic fracturing (underground miners) - perform all auxiliary work on loading and unloading materials, repair and installation of mechanisms, cleaning coal from the soil, etc.;

- MPU (operators of underground installations) - control various mechanisms;

- electrical fitters - repair the mechanical and electrical parts of the equipment, they ensure the trouble-free operation of all mechanisms;

- mine surveyors - draw up maps of underground workings, suggest the direction of the workings.

Is it hard to be a miner?

Any job in a mine is not easy. Despite the fact that most of the processes are mechanized, a lot of work has to be done manually. In conditions of high air temperature, dustiness and confined spaces, any work is much harder than on the surface.

The hardest work is for tunnellers and GROZs, but their salaries are also the highest.

Miners are believed to be fearless and strong people. Physical activity and difficult working conditions really create such people. Miners are also close-knit people. The specificity of production implies only teamwork. It's easier and safer to work this way.

How to become a miner?

Any of the mining professions requires specific knowledge that is acquired in educational institutions- institutes, technical schools, lyceums. The term of study is from 1 to 5 years.

There is also an accelerated form of education - at the training centers of the mines. Moreover, any person without education can acquire one of the professions in 2-3 months. But this education will not be enough for career growth... After the end of the training point, only blue-collar professions are available.

Why do people go to work as miners?

Work in the mine attracts with the level of wages and benefits.

Even a low-skilled miner has a salary that is much higher than that of people working on the surface. Over time, increasing your professional level, you can get a very high salary.

Miners have a vacation time of about 60 days a year.

If you go to work in a mine at the age of 18, then you can retire at the age of 38-50 (depending on the profession).

When living in a private house with stove heating - coal is free.

The coal trade unions are working well, allocating annual vouchers to the sea, to sanatoriums, recreation centers.

Quantitative and qualitative accounting of the work performed. Analysis and generalization of data on the work of mining brigades. Drawing up and submitting in the prescribed manner required documents and reports. Ensuring compliance with the legislation on the protection of subsoil and the environment, including land reclamation during mining. Industrial briefing for workers of mining brigades. Monitoring the observance by members of mining crews of production discipline, labor protection rules, fire protection rules. Participation in the selection and professional development of mining crews. 3. RIGHTS A mining foreman has the right to: 3.1. Request and receive the necessary materials and documents related to the activities of the mining foreman. 3.2.

Job description of an underground miner of the 3rd category

Lvov 10.01.2015 Job description No. 43 of a miner at geological works in Moscow 01.10.2015 1. GENERAL PROVISIONS 1.1. This job description sets out the duties, rights and responsibilities of a geological miner. 1.2. The decision on appointment and dismissal from office is made director general as advised by the head of the department.

404 error page does not exist

Avoid performing work on faulty equipment and using low-quality tools, fixtures and measuring instruments, as well as the use of raw materials, semi-finished products and materials that do not meet technical conditions in production. The mining foreman immediately notifies the superior manager of the decision made. A responsibility. The mining foreman of the mining section of the mine is responsible for the following.
Improper performance or non-performance of their official duties, provided for by this job description, within the limits determined by the current labor legislation of the Republic of Kazakhstan. Offenses committed in the course of carrying out their activities, within the limits determined by the current administrative, criminal and civil legislation of the Republic of Kazakhstan.

Underground miner

Provides and monitors the implementation of mining and tunneling crews of the schedule of mining exploration work, the drilling project, technology and work cycle schedules, certificates of drilling and blasting operations and securing workings, technical and geological requirements for the quality of work. 2.1.5. Provides leadership production process sinking of mine workings. 2.1.6. Ensures effective use and monitors compliance with the rules for the technical operation of equipment and power supply networks.

2.1.7. Organizes relocation of mining and tunneling crews to a new work area, foundation and closure of mine workings, emergency, special and other complex works. 2.1.8. Organizes and supervises repairs, Maintenance, inspection of equipment and other technical means. 2.1.9.

Job description of a mining foreman

Important

Organization of relocation of mining crews to a new work area, foundation and closure of mine workings, emergency, special and other complex works. Organization and control of repairs, maintenance, inspection of equipment and other technical means. Ensuring the implementation of the provisions, instructions, norms and other regulatory documents in force in the geological organization.

Attention

Determination of the needs of mining crews in technical means, tools, materials and services of support services, organization and control of their provision. Maintaining the established documentation on the operation of equipment, accounting for material assets, taking measures to ensure their safety and timely write-off. Provision and control of accounting, use and storage of explosive materials.

Official duties, rights and responsibilities of a mining foreman of a mining site

Supervises and is responsible for the strict observance of the order, accounting, storage, consumption and transportation of explosives by the personnel, admission to the production of blasting operations only by persons who have the right to do so, timely reporting of explosives used by explosives and delivery of the remnants of explosives to warehouses, as well as the correctness of data confirmation expenditure of VM by explosives. Supervises the provision, timely delivery to the site in its shift of materials, tools, equipment necessary for work. Provides preparation of production and workplaces for the normal operation of the next shift.

Promptly identifies the causes and takes measures to eliminate accidents and deviations from the work technology and takes measures to eliminate downtime for technical and organizational reasons. Keeps records of the amount of work performed per shift and analyzes the results of the work of teams and individual performers.

Job description of a mining foreman (Russian)

Checks the state of safety of all workplaces during the shift; - on orders, disassembles violations of the requirements of rules and regulations on labor protection, causes of accidents that have occurred during the past day, inform the workers of information messages, orders, instructions and other documents on labor protection; - ensures the safe organization of work, compliance by workers with the requirements of the rules and instructions for labor protection and industrial sanitation, as well as technological instructions; - together with the labor protection authorized person at his site checks: the state of workplaces, the serviceability of equipment, tools and devices , fences, alarms, blocking devices, warning posters, inscriptions, etc., promptly takes measures to eliminate the identified violations.
If they cannot be eliminated by the forces of the shift and at the same time there is a danger of injury to workers, immediately stops work and reports this to a superior manager; - conducts, in the prescribed manner, training and instructing the shift workers on labor protection; - in case of an accident, immediately organizes first aid to the victim, sends him to a medical center, informs the head of the shop and takes measures in accordance with the "Regulations on the investigation and registration of accidents at work"; - in the process of work does not miss a single noticed violation and, depending on the nature of the violation, takes prompt measures to suppress it; - analyzes the safety of technological processes and equipment and take measures to improve their safety.

Job description of a miner in geological work

For the period of absence of the mining foreman of the mining section of the mine (vacation, commanders, illness), replacement, performance of official duties is carried out in accordance with the procedure established at the industrial complex. Job responsibilities... Carries out operational management of mining operations. Before starting work, he gets acquainted with the state of mining operations at the site.
Receives an order-task from the head of the section or the person replacing him and brings it to the workers of his shift. Makes the arrangement of workers in their workplaces. Introduces workers to technical documentation, gives instructions on safety. Summarizes the work of the shift for the previous day. During the shift, when visiting workplaces, he checks their compliance with safety regulations and organizes safe work.
He personally supervises the production of complex and demanding work.

Job description of a miner

Request through the direct supervisor information and documents necessary for the performance of their official duties. 4. RESPONSIBILITY A geological miner is responsible for: 4.1. For improper performance or non-performance of their official duties, provided for by this job description, within the limits determined by the current labor legislation Russian Federation.
4.2. For violations committed in the course of carrying out their activities, within the limits determined by the current administrative, criminal and civil legislation of the Russian Federation. 4.3. For causing material damage within the limits determined by the current labor and civil legislation of the Russian Federation. 5. PROCEDURE FOR REVISING THE OFFICIAL INSTRUCTIONS 5.1.
Labor Code of the Russian Federation, Resolution of the Ministry of Labor of the Russian Federation of August 12, 2003 N 61 "On approval of the Unified tariff and qualification reference book of work and professions of workers, issue 4, sections:" General professions of mining and mining capital works "," General professions for enrichment, agglomeration , briquetting "," Extraction and processing of coal and shale, construction of coal and shale mines and open-pit mines "," Construction of subways, tunnels and underground structures for special purposes "," Extraction and processing of ore and alluvial minerals "," Agglomeration of ores "," Extraction and processing of mining chemical raw materials "," Extraction and processing of construction materials "," Extraction and processing of peat "," Processing of brown coal and ozokerite ores "and other regulatory legal acts regulating employment relationship. 1. General Provisions 1.1.
Promotes implementation in production new technology and technology. Promotes the development of workers' inventions and the timely implementation of the adopted rationalization proposals... Participates in the review of monthly plans for mining operations, in the planning of work for teams. Ensures the correctness and timeliness of the preparation of primary documents for accounting for production, working time., Production, downtime, as well as documents on the state of mining operations (book of elimination of failures, book for checking the fastening of mine workings, etc.). Conducts production instructions for workers, introduces newcomers to the internal labor regulations, safety and labor protection.

I APPROVE:

________________________

[Job title]

________________________

________________________

[Name of company]

________________/[FULL NAME.]/

"____" ____________ 20__

JOB DESCRIPTION

Underground miner 3rd category

1. General Provisions

1.1. This job description defines and regulates the powers, functional and job responsibilities, rights and responsibilities of an underground miner of the 3rd category [Organization name in the genitive case] (hereinafter - the Company).

1.2. An underground miner of the 3rd category is appointed and dismissed in accordance with the procedure established by the current labor legislation by order of the head of the Company.

1.3. An underground miner of the 3rd category belongs to the category of workers and reports directly to the [name of the position of the immediate supervisor in the dative case] of the Company.

1.4. An underground miner of the 3rd category is responsible for:

• timely and high-quality performance of tasks for their intended purpose;
• compliance with performance and labor discipline;
• observance of labor safety measures, maintenance of order, compliance with rules fire safety at the site of work assigned to him (workplace).

1.5. A person with a secondary vocational education in this specialty and work experience of at least 1 year is appointed to the post of an underground miner of the 3rd category.

1.6. In practice, an underground miner of the 3rd category should be guided by:

• local acts and organizational and administrative documents of the Company;
• internal labor regulations;
• rules of labor protection and safety measures, ensuring industrial sanitation and fire protection;
• instructions, orders, decisions and instructions of the immediate supervisor;
• this job description.

1.7. An underground miner of the 3rd category should know:

• arrangement of vehicles, devices used when loading heavy parts and equipment;
• varieties, species and sizes of forest materials;
• methods and rules for conducting and fixing drainage, drainage ditches and wells in various conditions;
• methods and rules of rigging;
• purpose and arrangement of jumpers of various types;
• methods and techniques for extinguishing burning coal;
• rules for conducting work when burning coal in mine workings;
• scheme of local and mine drainage;
• rules for loading boreholes, boreholes, mine chambers;
• device and location of water collectors, sump;
• work schedules of stands and skips;
• arrangement and purpose of shelves, ladders, ladders, hatches and other arrangements of mine workings, methods of performing carpentry work in a mine;
• mechanical properties and types of wood of various species;
• types and types of used support;
• rules for performing locksmith and installation work in the amount necessary for the work;
• basic information about the device of gas-cutting equipment.

1.8. During the temporary absence of an underground miner of the 3rd category, his duties are assigned to [the name of the position of the deputy].

2. Job responsibilities

An underground miner of the 3rd category carries out the following labor functions:

2.1. Reception of fasteners, explosive, construction, lubricants, spare parts and equipment at the shaft, pit or borehole, loading and unloading them manually or with the help of rigging mechanisms and devices into trolleys, platforms, buckets, cages; delivery through mine workings to the destination, from site to site, to the shaft (pit), delivery from the mine.

2.2. Carrying out, fastening, restoration and cleaning of drainage, drainage ditches and wells manually from rock and sludge, sludge removal, haulage of loaded trolleys.

2.3. Maintenance of equipment during the production of drainage works.

2.4. Inspection of the condition of mine workings, trimming the sides and roof using a perforator, jackhammer or manually, minor repairs of rock drills and jackhammers.

2.5. Cleaning of trolleys from adhered and compressed mass using pneumatic tools.

2.6. Assistance to the electric locomotive driver in the production of shunting work.

2.7. Execution of works on underground devices.

2.8. Tightening the sides and roof of the workings, replacing the puffs, backfilling the voids behind the support.

2.9. Soil support and side stripping.

2.10. Preparation of a cut for lintels.

2.11. Construction of all types of lintels and their repair.

2.12. Installation and repair of ventilation doors, windows, metering stations, wooden boards, pipes, barriers, scaffolds.

2.13. Installation of door frames, door hinge, installation of shelving.

2.14. Manufacturing, installation, disassembly and repair of ladders, hatches, stairs, shelves, fences, railings, bunkers in mine workings with an angle of inclination up to 45 °.

2.15. Sheathing of ventilation shafts in mines.

2.16. Procurement of rods, preparation of concrete mix, delivery to the place of work.

2.17. Rebar tying, installation and cementing of bolts, hooks.

2.18. Selection and procurement of support and formwork elements.

2.19. Delivery of rock by trolleys to the place of dry filling of the worked-out space.

2.20. Release of rock from ore slopes, rising funnels and passing it through screens into a bunker or ore pass, breaking up oversized items, building up ore passes.

2.21. Manual drilling of boreholes and underbores.

2.22. Harvesting and driving plugs into drilled holes.

2.23. Selection of drills and bits.

2.24. Participation under the guidance of a blaster in loading boreholes, blast holes, mine chambers with the delivery of explosives to the place of blasting operations.

2.25. Cleaning of sump, catcher chambers (under the cage, skips), water collectors from silt, spilled rock mass with loading into trolleys and unloading from them.

2.26. Breakdown of large pieces of rock.

2.27. Cleaning of conveyor strings of scraper and belt conveyors.

2.28. Participation in the replacement of pans and chains on conveyors, replacement of drums.

2.29. Participation in the repair of belt conveyors.

2.30. Maintenance of water barriers (carrying, delivery, installation of a container, filling with water).

2.31. Collection, loading and unloading of scrap metal in the mine.

2.33. Implementation of works to prevent and extinguish fires in coal and shale mines:

• assembly, disassembly, carrying, laying of pipe staves;
• preparation of a cut for lintels, drilling boreholes, fastening workings, ditches and wells with various types of lining, excavation of coal and rock in the zone of a burning massif.

2.34. Execution of auxiliary works during excavation and stope excavation of minerals.

In the event of an official need, an underground miner of the 3rd category may be involved in the performance of duties overtime, in the manner prescribed by law.

3. Rights

An underground miner of the 3rd category has the right to:

3.1. To get acquainted with the projects of decisions of the management of the enterprise concerning its activities.

3.2. Submit proposals for improving the work related to the responsibilities provided for in this job description for the management's consideration.

3.3. Inform the immediate supervisor about all deficiencies in the production activities of the enterprise (its structural divisions) identified in the course of performing their duties and make proposals for their elimination.

3.4. To request, personally or on behalf of a direct supervisor, from the heads of the enterprise departments and specialists, information and documents necessary for the performance of their official duties.

3.5. To involve specialists of all (individual) structural divisions of the Company in solving the tasks assigned to him (if this is provided for by the provisions on structural divisions if not - with the permission of the head of the Company).

3.6. Require the management of the enterprise to assist in the performance of their duties and rights.

4. Responsibility and performance evaluation

4.1. An underground miner of the 3rd category bears administrative, disciplinary and material (and in individual cases stipulated by the legislation of the Russian Federation - and criminal) liability for:

4.1.1. Failure to comply or improper fulfillment of the official instructions of the immediate supervisor.

4.1.2. Failure to fulfill or improper fulfillment of one's own labor functions and the tasks assigned to him.

4.1.3. Misuse of the granted official powers, as well as their use for personal purposes.

4.1.4. Inaccurate information about the status of the work entrusted to him.

4.1.5. Failure to take measures to suppress the identified violations of safety regulations, fire safety and other rules that pose a threat to the activities of the enterprise and its employees.

4.1.6. Failure to enforce labor discipline.

4.2. Assessment of the work of an underground miner of the 3rd category is carried out:

4.2.1. Immediate supervisor - regularly, in the process of the employee's daily performance of his labor functions.

4.2.2. Attestation Commission enterprises - periodically, but at least once every two years, based on the documented results of work for the evaluation period.

4.3. The main criterion for evaluating the work of an underground miner of the 3rd category is the quality, completeness and timeliness of his performance of the tasks provided for in this instruction.

5. Working conditions

5.1. The mode of operation of an underground miner of the 3rd category is determined in accordance with the internal labor regulations established by the Company.

5.2. Due to production needs, an underground miner of the 3rd category is obliged to travel to business trips(including local significance).

Acquainted with the instructions __________ / ____________ / "____" _______ 20__