Job description for the installer of pvc structures. Production instructions for an installer for the installation of steel and reinforced concrete structures. Responsibilities of an outdoor advertising installer
About the profession of an installer and his job description
Before talking about the job description for an installer, you need to decide what kind of profession it is. The fact is that the current ETKS (unified tariff and qualification reference book), describing specific blue-collar occupations, has about 50 occupations containing the word “installer” in its name.
What unites all this profession is that in all cases we are talking about a person who is engaged in assembling, installing, fixing and connecting various structures and mechanisms. In this case, we can talk about both power lines or pipelines, and about agricultural equipment, therefore it is important that the features of each of the professions are fixed in the corresponding job description.
There are no legal requirements for the design of an installer's job description, but in practice it turned out that it usually consists of the following parts:
Don't know your rights?
- General Provisions. Here the title of the position (installer), the level of qualification (indicating the category according to the classification reference books), as well as subordination within the organization are indicated. If the work of an installer requires special knowledge or work experience, this is also fixed in general provisions.
- Duties that the installer performs by virtue of his position. Their exact list depends on what kind of installation this worker is engaged in and in which particular organization he works.
- Rights vested in the installer. It makes sense to list only those that are not included in labor legislation. An example is the right to make statements and suggestions to management.
- The scope of responsibility assigned to the installer. Here, too, each case is usually not listed, but only the types of liability under the law are indicated (disciplinary, administrative, criminal, civil).
What are the duties of an installer?
Their exact list depends on what kind of structures or equipment this worker should install (for example, the job description of an installer working with reinforced concrete structures will be very different from the instructions of someone who is engaged in the installation of PVC products or electrical equipment), and from the qualifying rank that he has.
However, there are responsibilities that are specific to all cases:
- installation of structures;
- installation of auxiliary mechanisms used during installation;
- participation in tests of assembled structures;
- compliance with the rules, established by the requirements safety precautions when assembling assemblies, equipment, mechanisms or structures.
Where can I get a sample installer manual?
If installers work at your company and you need to draw up job descriptions for them, it would be wise to use ready sample... You can find it on any HR or legal resource (there is a sample of this document on our website).
However, before using, you need to make sure that the sample found corresponds to the exact profession for which the instruction is required. In addition, the found instruction should be checked for compliance with the ETKS in terms of the scope of job responsibilities.
Job description installer of PVC structures [name of organization]
This job description has been developed and approved in accordance with the provisions and other regulations governing labor relations.
1. General Provisions
1.1. The installer of PVC structures belongs to the category of workers and is directly subordinate to [name of the position of the immediate supervisor].
1.2. A person who has an initial professional education and work experience in the specialty for at least [meaning] years.
1.3. The installer of PVC structures is appointed and dismissed by the order of [name of the manager's position].
1.4. The installer of PVC structures should know:
Corporate standards, business plan of the organization;
Features of window production from PVC and aluminum profiles;
Brands and types window profiles PVC and aluminum;
General technical part of the window and stained-glass industry;
Production technology for the installation of PVC windows, doors, loggias and aluminum structures;
Methods for assembling and installing PVC windows, doors, loggias and aluminum structures;
Equipment and tools required for the production of work;
Rules for the execution of documents accompanying the installation of PVC structures;
Fundamentals of Labor Law;
Internal labor regulations;
Sanitary and personal hygiene rules;
Rules and regulations of labor protection, safety and fire protection;
Rules for the use of personal protective equipment;
Requirements for rational organization work in the workplace;
Requirements for the quality of work (services) performed;
Assortment and marking of the materials used;
Rules for the movement and storage of goods;
Types of marriage and ways to prevent and eliminate it.
1.5. The installer of PVC structures should be able to:
Sharpen, refuel, adjust, adjust the tools used;
Use the necessary fixtures and measuring instruments;
2. Job responsibilities
The installer of PVC structures has the following job responsibilities:
2.1. Obtaining a shift-daily assignment from [name of the position of the immediate supervisor].
2.2. Receiving ready-made structures from the site master, checking their quality.
2.3. Checking the order contents (products, accessories and their dimensions).
2.4. Receiving at the warehouse the tools, components and materials necessary for work.
2.5. Execution of works on loading and unloading of finished PVC structures.
2.6. Arrival at the installation site, execution installation works for the installation of structures, components, slopes in accordance with the technical documentation and terms of reference for a specific order.
2.8. Cleaning of construction waste and waste building materials in the work area.
2.9. Transfer of work to the client and signing of the deed of transfer.
2.10. Elimination of all deficiencies identified during the transfer.
2.11. Compliance with safety regulations, rules the opposite fire safety, industrial sanitation standards.
2.12. [Other job responsibilities].
3. Rights
The installer of PVC structures has the right to:
3.1. For all stipulated by law Russian Federation social guarantees.
3.2. For the free distribution of special clothing, special footwear and other personal protective equipment.
3.3. To pay for additional costs, for medical, social and vocational rehabilitation in cases of damage to health due to an industrial accident and an occupational disease.
3.4. Require the creation of conditions for fulfillment professional responsibilities, including providing necessary equipment, inventory, workplace, corresponding to sanitary and hygienic rules and regulations, etc.
3.5. Suspend work on faulty equipment when using raw materials and materials inadequate quality until the deficiencies are eliminated.
3.6. Require the management of the organization to assist in the performance of their professional duties and the exercise of rights.
3.7. To get acquainted with the draft decisions of the management of the organization concerning its activities.
3.8. Improve your professional qualifications.
3.9. Other rights provided for by the labor legislation of the Russian Federation.
4. Responsibility
The installer of PVC structures is responsible for:
4.1. For non-fulfillment, improper fulfillment of the duties provided for by this instruction - within the limits determined by the labor legislation of the Russian Federation.
4.2. For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of the Russian Federation.
4.3. For causing material damage to the employer - within the limits determined by the current labor and civil legislation of the Russian Federation.
The job description is developed in accordance with [name, number and date of the document].
HR manager
[initials, surname]
[signature]
[day month Year]
Agreed:
[initials, surname]
[signature]
[day month Year]
I have read the instructions:
[initials, surname]
[signature]
[day month Year]
(Job description of the installer of material handling equipment)
Job description of the installer
(Job description of the installer of material handling equipment)
APPROVED
General manager
________________
"________"_____________ ____ G.
1. General Provisions
1.1. The assembler belongs to the category of workers.
1.2. The installer is appointed and dismissed from it by the order of the general director on the proposal of the head of the structural unit.
1.3. The installer reports directly to the head of the structural unit.
1.4. A person who meets the following requirements is appointed to the position of an installer: initial vocational or secondary vocational education, work experience in the relevant field for at least six months.
1.5. During the absence of the installer, his rights and obligations are transferred to another official, which is announced in the order for the organization.
1.6. The installer should know:
- methods of installation of particularly complex equipment;
- methods of regulation and adjustment of equipment;
- rules for individual testing of equipment.
1.7. The installer is guided in his activities:
- legislative acts of the Russian Federation;
- the Charter of the organization, the Internal Labor Regulations, other regulations of the company;
- orders and orders of the management;
- this job description.
2. Job responsibilities installer
The installer fulfills the following job duties:
2.1. Carries out the installation of metal structures of portals, bridges, towers, booms, supports and other bearing assemblies of cranes.
2.2. Installs movement mechanisms for cranes operating on curved tracks.
2.3. Installs electric winches and hydraulic lifters.
2.4. Carries out the installation of rail grips.
2.5. Takes part in the testing of cranes.
2.6. Performs other work on the installation of handling equipment.
3. Installer's rights
The installer has the right:
3.1. Require the administration to ensure the rules of labor protection, safety and fire safety.
3.2. Require the provision of overalls in accordance with current regulations.
3.3. Submit proposals for improving the work related to the responsibilities provided for in this instruction for the management's consideration.
4. Installer's responsibility
The installer is responsible for:
4.1. For non-fulfillment and / or untimely, negligent fulfillment of their duties.
4.2. For non-compliance with the current instructions, orders and orders for the preservation of commercial secrets and confidential information.
4.3. For violation of the internal labor regulations, labor discipline, safety and fire safety regulations.
General manager
LLC "ACCOUNTING ONLINE.RU" __________ Dmitriev S.A.
OFFICE INSTRUCTIONS FOR THE INSTALLER OF PRODUCTS FROM PVC PROFILE
1. GENERAL PROVISIONS
1.1. This job description defines the duties, rights and responsibilities of the installer of PVC profile products.
1.2. The installer of PVC profile products belongs to the category of workers.
1.3. The installer of PVC profile products is appointed and dismissed from
positions by order general director organizations as advised by the head of the installation and service department.
1.4. The installer of PVC-profile products obeys (receives orders, workers
orders, etc.) directly to the head of the installation and service department.
1.5. The installer of PVC-profile products in his activities is guided by:
- technical regulations, other guidance materials,
regulating the performance of work entrusted to the installer of PVC profile products;
- the charter of the organization;
- local regulations, administrative documents issued
the head of the organization, orders of the head of the installation and service department;
- this job description.
1.6. During the absence of the installer of PVC-profile products (vacation, illness, etc.), his duties are performed by a person appointed in established order, which acquires the corresponding rights and is responsible for the performance of the duties assigned to it.
2. QUALIFICATION REQUIREMENTS
2.1. A person who has
secondary specialized education and (or) work experience of at least three years.
2.2. The installer of PVC profile products should know:
– general information on the technology and procedure for carrying out work on the installation of products and
structures made of PVC profile (windows, doors, slopes, etc.);
- Methods for assembling and performing installation work for products and structures made of PVC profiles;
- the procedure and methods for planning installation, commissioning and test work;
- device and rules for the use of the used rigging
(connectors, chains, carabiners, cables, steel ropes, etc.);
- ways to check the dimensions of products;
- the simplest methods of alignment of mounted products;
- ways of using assembly and power tools;
- ways of moving products and equipment using mechanized
rigging equipment;
- device of mounted products and technology of their installation;
- requirements for the quality of work (services) performed, for rational
organization of work in the workplace;
- types of marriage and ways to prevent and eliminate it;
- fastening methods;
- types and marking of materials used;
- rules for the use of personal protective equipment and safety;
- labor regulations;
- rules of labor protection, industrial sanitation and personal hygiene, fire
security.
3. OFFICIAL RESPONSIBILITIES
The installer of PVC profile products is obliged to:
3.1. Receive and study the terms of reference for the performance of work in advance.
3.2. Perform only the work stipulated by the terms of reference. Offer
To the customer Additional services and charge for this without the consent of the boss
installation and service department is prohibited.
3.3. Start work only after checking the workplace at
compliance with safety requirements.
3.4. If the Customer's property is in the work area, warn him about it.
3.5. When working at height, prepare the necessary equipment, construction towers, tours.
3.6. Objectively tell the Customer about all stages of the upcoming work.
3.7. Perform work on measure
, installation (assembly) of products and structures made of PVC
profile (windows, doors, slopes, etc.), including:
- visit to the client to carry out measurements required for the manufacture of the product;
- checking the order package (products, accessories and their dimensions);
- inspection of elements of products (structures) and components for the absence of obvious defects;
- measurement of products (structures) in order to identify a gross error in overall
sizes;
- other preparatory work before installing the product;
- dismantling of the old product;
- preparation of window / door and other openings for installation (mounting) of the product
(constructions) made of PVC profiles;
- installation of a new product (structure);
- installation of ebb, slopes, mountings, window sills and other related
product of elements;
- fittings adjustment;
- checking and showing to the Customer the performance of the product (structure), fittings and
other elements;
- informing and showing the Customer the rules for operating the product (structures);
- cleaning of construction waste and waste of construction materials in the work area;
- preparation of the necessary documentation.
3.9. Communicate politely with the Customer, take good care of his property.
3.10. Bring to the Customer only permitted by the head of the installation and service
department information.
3.11. Strictly observe the operating hours of the production, office and facilities of the Customer.
3.12. Arrive at the Customer's facility at the time strictly agreed with the Customer. To inform the Customer about delays additionally.
3.13. Ensure the installation of structures, components, etc. in accordance with
requirements of technical documentation.
3.14. Carry out the work independently without involving other assembly teams (if
otherwise not established by the terms of reference) and unauthorized persons.
3.15. Be constantly available on mobile and / or regularly report your
location, schedule delays, arrival at the Customer's site, completion of work at the site in any other available way.
4. RIGHTS
The installer of PVC-profile products has the right to:
4.1. Require the creation of normal conditions for the performance of official duties provided for in this instruction. Including the provision of the necessary equipment, inventory, personal protective equipment, benefits and compensation for work in working conditions deviating from normal.
4.2. Get acquainted with the decisions of the organization's management regarding its activities.
4.3. Make suggestions for improving the work related to the responsibilities provided for in this instruction.
4.4. Request information and documents through the direct supervisor,
necessary for the performance of their official duties.
4.5. Improve your professional qualifications.
5. LIABILITY
The installer of PVC profile products is responsible for:
5.1. For improper performance or non-performance of their duties,
provided for by this job description - within the limits specified
the current labor legislation of the Russian Federation.
5.2. For offenses committed in the course of carrying out their activities - in
limits determined by the current administrative, criminal and civil
the legislation of the Russian Federation.
5.3. For causing material damage - within the limits determined by the current
labor and civil legislation of the Russian Federation.
5.4. For violation of the Labor Regulations, fire safety and safety rules established in the organization.
I have read the instructions, received a copy: ______________ / _________________ / "___" _______ 201_y
We bring to your attention a typical example of an installer's job description, sample of 2020. Do not forget that each instruction of the installer is handed out against a receipt.
This section provides typical information about the knowledge that an installer should have. About duties, rights and responsibilities.
This material is included in the huge library of our site, which is updated daily.
The job description of the installer depends on the specifics of his labor activity. Typical sample of this departmental document contains several sections - general provisions, duties, rights and responsibilities.
1. General Provisions
The section of the instruction fixes the position of the employee in the structure of the organization, the requirements for his education and professional qualifications:
The assembler is a worker and reports to the head of the department, as well as the head of the organization;
He must have a secondary specialized education, confirmed by a diploma;
The installer knows and is guided by current activities work safety rules. He knows the methods of assembly operations, knows how to set up the appropriate equipment, use protective equipment and hand tools;
In everyday work, the installer is based on the laws of Russia, the internal administrative acts of the organization, this instruction;
For the period of his absence from work in connection with the next vacation, temporary disability or for other reasons, his functions are performed by another employee of the same unit, appointed by a separate order of the management.
2. Responsibilities of the installer
This manual contains an exhaustive list of responsibilities this employee... It can be interpreted broadly:
Carries out the installation of equipment, performs start-up work;
Provides the repair of equipment necessary for the performance of his duties;
Carries out installation of welded and other metal structures;
Starts and stops equipment. Before starting work, he is obliged to check the operability of the equipment, and after the end of work, he is obliged to check the condition of the equipment;
Carries out any types of installation activities on behalf of the management within the limits of his competence and education;
Complies with safety requirements, undergoes induction, primary and other established types of instruction;
Carefully treats the property of the organization, takes measures to prevent its breakage or destruction;
Implementation of assembly and laying works, dismantling of structures and structures;
Obliged to report to immediate superiors about emergency situations, industrial injuries, equipment failure.
3. Installer's rights
In order to ensure the interests of the employer and exercise the powers of this specialist, the installer is endowed with the following rights:
The right to safe work performance, provision of personal protective equipment;
He has the right to receive reliable information about the risks associated with the performance of the relevant work;
Has the right to demand from the management to provide it with the necessary technical means, manual tools for solving the assigned tasks;
Has the right to know about the decisions of the management concerning his immediate activities;
Has the right to propose to the head measures to improve the activities of the organization, increase labor efficiency.
4. Installer's responsibility
The installer is fully responsible for the work performed, its quality and timeliness. In case of damage to equipment or other property of the organization through his fault, the installer bears financial responsibility within the limits established by the additional agreement.
In case of non-fulfillment or improper fulfillment of duties, violation of the rules of labor discipline, the worker may be brought to disciplinary punishment.
The installer's job description is a sample of 2020. The duties of the installer, the rights of the installer, the responsibility of the installer.
