Window profile "Novoline". Novoline profile. Car floor mats and trunk Plastic windows novline

I am glad to welcome my readers!

During my work I have installed many windows, but more often than not the quality was not very good.

The fact is that the main thing in a plastic window is the profile, but at first glance, all the windows look the same. That is why, I have often come across the fact that clients choose a low-quality profile.

What is the main thing in plastic windows? The basis of plastic windows is a profile. A good profile is the key to high-quality and reliable plastic windows.

How to choose a quality profile and what to look for when choosing? To this question, I want to help you find the answer in this article.

We go outside or take a newspaper and what we see - windows KBE, REHAU, VEKA, SALAMAHDER, LG, PROPLEX, BRUSBOX and the like. What is behind all these names? - These are the names of companies producing window profiles and nothing else, and your windows will be manufactured by completely different companies, and we know very well what our manufacturers can make from the best raw materials.

Still, a little about the profile manufacturers. When ordering windows, you will hear from the manager that the windows (for example KBE, VEKA, REHAU, SALAMANDER) are German windows made in Germany - naturally the best and highest quality. What is true in these words and what is not? Of all those listed, only SALAMANDER is 100% produced abroad (therefore, it has a corresponding price), the rest have been produced in Russia for a long time.

And about the production of the window profile itself. Most of the factories of profile manufacturers have built their factories in Russia. I was at KBE and VEKA factories - excellent factories, imported equipment, foreign specialists, imported raw materials, so there is no big difference from where the profile comes from (I think a similar situation is at other factories of European manufacturers).

The truth is, as always, there is a "BUT". This is a "NO" profile system made specifically for Russia, ie. abroad it is not used - it is only for us at "our request." The advantage of this system is cheap, the disadvantage is to reduce the cost, the walls of the profile are made thinner, respectively, the thermal resistance is less, the strength is less.

For the south, this is quite acceptable, in the middle lane - it is doubtful, in the north they can freeze. Usually this profile system is called an object profile and is used for glazing large objects - multi-storey residential buildings, industrial enterprises, etc. There are also Russian and Turkish systems, but since we are going to glass our house, we will not consider these systems in detail.

Which profile I personally prefer, I can write further.

Which profile do you think is the best? Which is better than Rehau or Brusbox? Century or Proplex? KBE or LG? etc.

The most difficult and annoying question, to which it is almost impossible to give a reasoned answer, I can only express my personal opinion. I emphasize again - this is my personal opinion, and not advertising and the conversation will only go about the specialized systems with which I worked.

A few words about SALAMANDER (not in competition) - good profile. The main advantage is made in Germany, the main disadvantage is expensive. Produced, would, in Russia - was among the middle peasants.

Now, in order about the profile systems produced in Russia:

Better than others for:

the number of customer reviews,
the number of rejects in the supply of plastic profiles,
sealant,
conducting seminars, trainings and training courses for window manufacturers.
A variety of profile systems.

Another advantage is that it sells the profile only to well-equipped enterprises for the production of plastic windows, which it regularly checks and issues its certificate to these factories. Therefore, if you have chosen a plant working with this profile, then the likelihood of getting into an unpleasant situation is less.

I give the second place. This company sells its profile only to well-equipped enterprises for the production of plastic windows, which it regularly checks and issues its certificate to these factories. Therefore, if you have chosen a plant working with this profile, then the likelihood of getting into an unpleasant situation is less.

Honored 3rd place.

Disadvantages:

There are disruptions in profile supplies, profile defects are more frequent than in REHAU and VEKA
Sells the profile to any plastic window factories.

THYSSEN, LG, DIMEX

MOTNTBLANK, PROPLES, BRUSBOX

They share the last place in terms of the number of positive reviews of people who installed windows, but they are very well suited for glazing balconies and loggias, as well as household premises. The advantage is the low price.

P.S. I didn’t work with other specialized systems, so I can’t say anything about them.

source: http://infokna.narod.ru/

Which profile of a plastic window is better to choose? Selection tips and manufacturer ratings

The profile is the main element of any window; the durability and reliability of the entire structure depends on it. At first glance, the profile for PVC windows from different manufacturers looks almost the same.

The difference in quality becomes apparent after several months (or even years!) Of use, when cheap windows begin to warp and cracks form in them. How to choose a good plastic window profile? How do products of different brands differ from each other? And does it make sense to save on glazing by choosing an economy class profile?

Profile for PVC windows: characteristics and types

The profile is the basis of the entire structure from which the window sashes and frames are made. They determine not only the appearance of the window, but also its strength. Common materials for window profiles are wood (cedar and larch) and aluminum.

But most often the profile for windows is made of PVC, or polyvinyl chloride. Such a profile is reinforced with metal inserts and has air cavities inside that increase the thermal insulation of the structure.

According to the European standard EN 12608 SR "Unplasticized polyvinyl chloride (PVC-U) for the manufacture of windows and doors" and similar to the Russian GOST 30673-99 "Polyvinyl chloride profiles for window and door blocks. Specifications "profiles are classified according to a number of characteristics. In particular, in terms of the thickness of the external and internal walls, there are:

Profiles of class A - have outer walls with a thickness of 2.8 mm and inner walls with a thickness of 2.5 mm; they provide the best thermal insulation and are considered the best choice.
Class B profiles - have outer walls with a thickness of 2.5 mm, inner ones - from 2.0 mm; such windows are not only "colder", but also 15% less resistant to deformation.
Profiles of class C - all the others that do not fit standards A and B, they are not subject to strict requirements.

Note!

There is a so-called "object" profile, which is intended for installation in non-residential industrial premises. It cannot be used in houses and apartments - because of the thin walls, it does not keep heat and is unstable to deformation.

At first glance, such a profile is no different from the usual one - except that you can see the object marking on the protective film. Often, unscrupulous companies offering very low prices for their goods sell windows from just such a profile.

Choosing the best profile for plastic windows

It is not easy to determine "by eye" which profile of plastic windows is better, but there are some features that can say a lot about its quality.

Profile uniformity

The plastic must be homogeneous and absolutely smooth. The grainy surface suggests that the windows were most likely made in artisanal conditions and are fake. The coating must also be uniform, streak-free and free of gradients.

By the way. In order not to buy a fake at the price of branded windows, pay attention to the factory markings on the inside of the window frame. It should have a stamp with the name of the manufacturer and a number of numbers: shift number, devices for the production of PVC profiles and date of manufacture.

Profile width

Most often, companies offer a plastic profile for windows with a width of 58 mm - this is the classic option, preferred for residential premises. There is also a profile with a width of 70 mm, this is often installed in high-rise buildings or where the climate is especially harsh. The 90 mm wide profile belongs to the premium range, it has excellent heat and sound insulation characteristics. However, not all companies work with such products.

Profile thickness

The profile thickness should be the same, from 2.5 mm to 3 mm. However, for heavy window blocks, thin walls are not suitable - in this case, the weld seam turns out to be less strong, which means that the reliability of the entire structure suffers.

Number of air chambers

The number of cameras also depends on the profile width. The 58 mm profile can have a maximum of three chambers - which, however, is quite enough to keep the windows warm. 70mm - with three, four and even five cameras. The last ones mentioned (70 mm) are most in demand for glazing apartments and houses.

Six cameras are the norm for a 90mm profile. The more cameras - the warmer and quieter it will be in the house. However, in fairness, it should be said that the difference between, for example, a three- and four-chamber package is not so significant.

Number of double-glazed windows

The number of air chambers in the PVC profile should not be confused with the number of double-glazed windows. A double-glazed window is a few sheets of glass connected to each other along a contour using a special frame and sealants. Sealed chambers with air or other gas inside are formed between the glasses.

A single-chamber double-glazed window is the lightest, it consists of two glasses and one air chamber between them. Such double-glazed windows are very light, suitable for glazing large openings, therefore they are often installed on balconies, loggias and terraces. However, they are not suitable for windows due to insufficient thermal insulation.

For a house, dacha, office or apartment, it is better to choose a two-chamber double-glazed unit, consisting of three sheets of glass and two air chambers. Three-chamber double-glazed windows of four sheets of glass are not common, they are heavy and transmit less light than other types of double-glazed windows.

Such windows are in demand only in the North, where the temperature in winter can drop to -40 o C and below. At higher temperatures, there is almost no difference between two- and three-chamber double-glazed windows.

Helpful advice!

When choosing a plastic profile for windows, pay attention to the frame seals. There should be two of them, otherwise condensation will settle under the frame, and this spoils the insulation and creates a favorable environment for bacteria and mold.

Window profile rating: comparison of products from key manufacturers

Rehau
One of the most famous companies that has been producing reliable windows for more than half a century and is considered the main innovator in this area - Rehau engineers are constantly improving the design and configuration of the profile - so the company pays great attention to environmental friendliness and energy-saving technologies. The company produces a profile with a width of 60-70 mm. Rehau products belong to the middle class.
VEKA
Another German "giant" whose products are appreciated all over the world. VEKA produces a white and colored profile that does not fade or yellow when exposed to direct sunlight. The seal is made of natural rubber, which does not freeze even when exposed to very low temperatures - a valuable quality for the Russian climate. The line includes models with a width of 58 to 90 mm. For the price, VEKA windows are comparable to Rehau.
Trocal
This is a company with a long history, one of the pioneers in the production of plastic windows. The first model was released in 1954. For decorative finishes, the company offers the widest range of options - from lamination to acrylic coating. The profile is made using the environmentally friendly Greenline technology and provides perfect thermal insulation. Profile width - 70 mm.
Salamander
This German company is not as famous as KBE or VEKA, but Salamander products are in no way inferior to them in quality. The profile is produced exclusively in Germany, which means that when purchasing such windows, you can count on a truly European quality - at the same European price. The company produces bags with a width of 60 to 76 mm.
KBE
One of the most popular German brands, which produces environmentally friendly windows, recommended for installation in child care facilities and hospitals. KBE windows are of high quality and durability (they can last up to 50 years!), And the line includes both luxury models and economy options. Profile width - from 58 to 70 mm.
Proplex
Proplex is a Russian company that, despite its youth, has already managed to establish widespread production and significantly modernize window systems. The profile is being developed with the participation of Austrian specialists and taking into account Russian conditions. With very good product quality, the company still manages to maintain affordable prices. Proplex offers models in widths from 58 to 127 mm.

This is only a small part of the manufacturers of plastic windows, in fact, there are dozens, if not hundreds of them. What are the best plastic windows? When choosing glazing, one should give preference to well-known brands, but at the same time it is imperative to check all the documentation - famous brands are often faked. Branded windows at too low a price is a sign that they may be trying to cheat you.

Editorial opinion

Even the best windows will not last long if mistakes were made during their installation. Better simple economy-class windows installed by professionals than expensive German windows installed by amateurs.

source: http://www.kp.ru/

Which profile of plastic windows is better

What is a quality profile?

The key to the quality and durability of a metal-plastic window is a high-quality profile. Even if at first glance the entire profile for plastic windows is the same, in reality this is far from the case. What profile for plastic windows is better, and how to choose the right window, VEKA Rus specialists advise you.

Certificates

The entire profile from which the windows are made is certified. The most significant is the RAL Certificate, which certifies not only the type of product, but also the place of its production. In other words, a profile of the same brand, but made at different factories, will not always have this certificate.

The ISO 9001: 2000 quality management system certificate is issued to industries that have a well-organized management system in compliance with all technological, economic and organizational requirements typical for the production of developed countries. Both Russian VEKA plants have this certificate.

If the profile is wider, is it safer and warmer?

Profile width is one of its main characteristics. Many window manufacturers promise a couple of extra millimeters to the width of the profile in their advertising campaigns, but are there really any benefits?

The following offers are most often found on the market:

classic profile 58 mm;
70 mm profile with increased assembly width;
VEKA ALPHALINE profile 90 mm.

The width of 58 mm is due to the "classics of the genre" - wooden frames, which were replaced by plastic windows. Today, the EUROLINE 58 mm profile allows the production of modern warm windows that meet the requirements of most buyers in different climatic zones. Provided it is properly manufactured and installed, it is the best window profile for any room.

A profile with a width of 70 mm is a proposal that appeared in the 80s of the last century. Having higher heat-saving sound-insulating characteristics, this profile is especially loved by Russian consumers. In the product group of VEKA profiles, SOFTLINE, SWINGLINE and PROLINE have a width of 70 mm.

The 90 mm wide profile is a premium product that appeared about 5 years ago. The VEKA ALPHALINE profile allows the use of a double-glazed unit up to 50 mm thick and is currently the unsurpassed leader among window profiles with increased energy-saving characteristics.

Note!

The choice of profile width largely depends on the installation location (office window, vestibule door, store front door, country house windows) and climate.

Now another novelty has appeared on the market - the SOFTLINE 82 profile. An innovative multi-chamber system, an elegant style and a choice of more than 40 modifications guarantee the satisfaction of the needs of the most demanding client. The SOFTLINE 82 system provides the best insulating characteristics, is fully compatible with 70 mm profiles and can be installed in any home.

Number of cameras

The second characteristic of the window is the number of cameras in the profile. There are three of them in the standard. The first is for draining condensate, the second is for placing a reinforcing insert made of metal, and the third is for fixing parts of the fittings and creating an additional air gap for better window tightness. The number of chambers depends on the profile width. So, a 58 mm profile can have a maximum of three cameras, but a 70 mm profile - preferably four. For a 90 mm profile, 6 chambers are the norm.

Three and six chamber profile systems

An increase in the number of cameras with the same profile width insignificantly changes the window characteristics. To increase the heat-saving characteristics, a wider profile is needed, and not a larger number of partitions in it.

Full package

Another important point is the double-glazed window. The number of glasses in a window affects its characteristics and cost. The most common are double-glazed windows, but single-glazed or triple-glazed windows can also be ordered.

Triple windows are warmer. However, they are heavier and require high-quality assembly and a stable structure. Single glazing is the coldest. It can be used for glazing unheated balconies and summer houses. Double glazing is optimal in terms of technical characteristics, and allows you to maintain comfort in the room all year round.

Profile class

There are two classes of metal-plastic profiles. The first, class A, with a thickened outer wall, is RAL certified as the optimal profile for windows, doors and frame glazing.

Helpful advice!

The second, class B, is a lightweight profile with a thinner outer wall, the so-called "object" profile. It has a slightly lower cost, but does not guarantee the preservation of the characteristics of the window during the entire period of its operation.

Windows from the "object" profile, as an economical option, can be offered by absolutely all manufacturers, but you must remember that such a window may have weaker corner joints, worse dimensional stability, lower energy-saving characteristics, the risk of premature wear of the fittings, and a shorter service life.

conclusions

Summing up the reasoning on the topic of choosing a profile for a metal-plastic window, we emphasize:

The presence of certificates confirms the quality.
According to the mounting width, all profiles are divided into two main classes: 58, 64 mm and 70 -76 mm. Within the class, the heat engineering characteristics are the same. Profile 68 mm wide and profile 72 mm wide do not differ from each other.
The number of cameras affects the quality of the window only if the profile belongs to different classes in width.
The most common is double glazing.
The class A profile is the leader in reliability and quality.

When choosing windows, be able to hear the necessary information and filter out ads. The quality of your windows depends on your choice. Take the time to make the right choice!

Standart of Germany

The Novoline window profile is produced with an assembly width of 58 millimeters and 70 millimeters. The 58mm window systems feature a four-chamber design. The location of the chambers inside the profile prevents the freezing process of the window structure.

Specifications Novoline_58mm.

Profile width - 58mm.
Profile cameras: frame-4, sash-4, impost-3.
Frost resistance up to - 55 s
Profile corresponds to class A
The seal is black, gray.

araks56.ru

Novoline green's Profile | sar-okno64.ru

More than ever, today's market is in demand for a profile that meets European standards, and at the same time has an affordable price. Such an inexpensive and high-quality profile is "Novoline Green" (Novoline).

Profile quality for plastic windows.

The NOVOLINE profile system belongs to class A, the plastic formulation used for its manufacture was developed by specialists from IKA (Germany), thanks to which Novoline meets German thermal insulation standards.

In the manufacture, only primary raw materials are used, and also in the formulation of the mixture there are specially developed in the USA (Rohm & Haas) impact modifiers.

Profile protective film is produced in Germany.

Novoline window profile marking.

Each running meter of the profile is laser-marked with the name, production date and the corresponding GOST.

Construction and appearance.

Structurally and externally, NOVOLINE is a complete analogue of the well-known German KBE profile. Technical advantages are combined here with elegant design.

The operational properties of the profile.

Novoline behaves well in the harsh natural conditions of Russia, the entire line of profiles has certificates for frost resistance, the profile does not turn yellow over time, and is resistant to ultraviolet light.

Types of Novoline profiles:

There are two types of Novoline profile system, with an installation depth of 58 mm and 70 mm.

Technical characteristics of the profile NOVOLINE (Novoline) 58 mm:

Mounting depth 58 mm.
The maximum width of the glass unit is 32 mm.
The number of cameras in the profile is 3.
Frost resistance - up to -55 degrees Celsius.
Class A.
Service life - over 40 years.
Gray or black gaskets.
Heat transfer resistance, m2 ° C / W - 0.7.
Environmentally friendly PVC

Specifications NOVOLINE 70 mm:

Mounting depth - 70 mm.
The maximum glass unit is 42mm.
The number of cameras is 5.
Frost resistance - up to -55оС.
Heat transfer resistance, m2 ° C / W - 0.83.
The service life is more than 40 years.
Gray or black gaskets.

Environmentally friendly PVC profile.

Purchasing windows from the NOVOLINE profile (Novoline) in the First Window Company of Saratov. You get European-level windows at a very affordable price!

sar-okno64.ru

NOVOLINE | IP Barinov "Build a project"

NOVOLINE - The system of plastic profiles "NOVOLINE" is a complete analogue of the profile of the German brand "KBE", which allows you not to buy new equipment for processing a profile (To get started, you just need to reconfigure the existing one).

Plastic windows are made of PVC (Polyvinylchloride) - a durable, economical and environmentally friendly material. It is quite convenient and reliable, and thanks to special technologies, PVC profiles are the best alternative to the traditional wooden frame today and in many ways surpass it. The NOVOLINE PVC profile is produced on high-tech lines of the largest plant in Russia, equipped with the most modern extrusion equipment from Germany. each meter of the profile is laser-marked with the production time, system name and GOST number. The unique qualities of the plastic are ensured by the original mix recipe specially selected with the participation of specialists from IKA (Germany). All the necessary additives used in our recipe are imported. They include: impact modifier (Rohm & Haas, USA), calcium carbonate (Omya, France), titanium dioxide (DuPont, USA).

NOVOLINE profile available for everyone

stroi-proekt-rb.ru

Plastic windows in Orsk at low prices

The Tenkoff company manufactures and installs modern plastic windows from Rehau (Rehau), Novoline (Novoline) profiles. The profile systems used have proven themselves well in the Russian climate, have a high coefficient of heat retention, protection from street noise, and durability.

High performance characteristics of our windows are provided by fittings of Russian and European production.

In the production of our windows, we use energy-saving glass, which allows you to better keep warm in the house in winter and protect from heat in summer.

Rehau windows

The Rehau 60 mm profile is perhaps the most popular in Russia today.

Reliable windows made of such a profile effectively retain heat, protect the house from street noise and easily fit into any interior.

Specifications

System depth / number of chambers: 60 mm / 3 chambers.
Heat engineering: Ropr = 0.70m2 ° C / W.
Burglar-proof: installation of reinforced locking devices due to the displacement of the axis of the device groove of 13 mm.
Air and water tight: reliable protection against drafts, dust and water thanks to two sealing circuits (6/8 mm overlap on the outside and inside).
Surface: high quality, perfectly smooth, easy to clean.

NOVOLINE WINDOWS

The Russian-made 58 mm Novoline profile is perfect for the harsh climate of Russia. The manufacturing plant is located in Samara. The relative proximity to Orsk makes it possible to reduce the cost of the window due to the low cost of transporting the profile.

This profile has a class A certificate. Only primary raw materials are used in the manufacture of the profile. The recipe for the NOVOLINE profile was developed with the participation of specialists from IKA (Germany), due to which it meets modern German standards for heat saving. It is extruded on the latest high-tech equipment and is equipped with a protective film made in Germany.

Profile technical characteristics

Profile width - 58mm.
Possible thickness of the glass unit - 32 mm
Profile cameras: frame-4 cameras, shutter-4 cameras, impost -3 cameras.
Frost resistance up to - 55 s
The profile corresponds to class A.
The seal is black, gray.

xn ---- 7sbqbggqdwl4b2aa2ixa.xn - p1ai

Novoline - MASTER WINDOWS

The Novoline plastic profile is similar to the German KBE system. The Novoline window profile is intended for the manufacture of plastic door and window systems installed in any buildings located in difficult climatic zones.

The Novoline window profile was designed taking into account the Russian climatic conditions. It is characterized by high resistance to frost and resistance to ultraviolet radiation. The Novoline profile is made of a material with a high coefficient of resistance to heat transfer, a low coefficient of thermal linear expansion. The welded seams of the profiles have increased strength. The Novoline profile is frost-resistant.

The window profile "NOVOLINE" is produced on the latest German extrusion equipment. High-tech production lines ensure the production of the highest quality window profiles, as evidenced by the presence of laser marking on each meter, informing about the production date, state standard number and the name of the system. The German company IKA participated in the creation of a polyvinyl chloride mixture with unique technical characteristics. Special recipe components that impart special strength to plastic are produced at foreign chemical plants (United States of America, France). The Novoline window profile is produced with an assembly width of 58 millimeters and 70 millimeters. The 58mm window systems feature a four-chamber design. The location of the chambers inside the profile prevents the freezing process of the window structure.

The width of the five-chamber profile is 70 millimeters. As a result of the installation of an additional chamber, sound insulation and thermal insulation increase by 30 percent. Premises where windows from this profile are installed are reliably protected from low temperatures. And the increased thickness of the profile walls prevents the window structure from freezing and the formation of water condensation. In addition, it is the perfect combination of elegance, technical solutions and economic benefits.

Specifications Novoline_58mm. 1. Profile width - 58mm. 2. The possible thickness of the glass unit is 32 mm3. Profile cameras: frame-4, sash-4, impost-3. 4. Frost resistance up to - 55 s5. The profile corresponds to class A.6. The seal is black, gray.

oknamaster02.ru

NOVOLINE

In recent years, many people who want to order a window are looking for a window from a profile that will meet all modern standards and at the same time will be affordable. It is for such clients that the line of NOVOLINE profiles was created.

The system of plastic profiles "NOVOLINE" is a complete analogue of the profile of the German brand "KBE", which allows you not to buy new equipment for processing the profile (To get started, you just need to reconfigure the existing one).

The profile system "NOVOLINE" is designed for the manufacture of windows and doors for any premises and is specially adapted for Russian operating conditions.

The recipe for the profiles of the NOVOLINE systems was originally developed for the harsh Russian climate. Therefore, the main attention in the development was paid to achieving high frost resistance, UV resistance, strength of welded seams, low coefficient of linear expansion and high coefficient of resistance to heat transfer. All NOVOLINE profiles are certified as frost-resistant profiles.

PVC profile "NOVOLINE" is produced on high-tech lines of the largest plant in Russia, equipped with the most modern extrusion equipment from Germany, each meter of the profile is laser-marked with the time of production, the name of the system and the GOST number. The unique qualities of the plastic are ensured by the original mix recipe specially selected with the participation of specialists from IKA (Germany). All the necessary additives used in our recipe are imported. They include: impact modifier (Rohm & Haas, USA), calcium carbonate (Omya, France).

The high quality of window structures created on the basis of the profile of the new system "NOVOLINE" made it possible to establish the latest quality criteria, one of which is technical characteristics.

All profiles of the "NOVOLINE" 58mm system have three internal chambers. With this design and arrangement of the chambers, the profile does not freeze. Overflow of heat over the metal is excluded, since the metal reinforcing profile is located in the middle chamber located between two small chambers and does not come into contact with the outer walls of the profile anywhere.

The 5-chamber profile "NOVOLINE" has an installation width of 70 mm, which allows you to optimally keep warm and quiet in the room.

Products made from PVC profiles "NOVOLINE" combine an elegant appearance, as well as technically and cost-effective solutions.

stand-art-saratov.ru

Car mats have long become an attribute of comfort in the car, without them it is difficult to imagine a modern vehicle. This accessory has many functions: it prevents moisture from entering the body, which reduces the likelihood of corrosion, the floor is less dirty and easier to clean. In addition, car floor mats help to reduce the noise level in the car to a certain extent, making travel less fatiguing and creating a neat and cozy feeling.

3 main requirements for good car mats:

The car mat should be fixed on the car floor, excluding moving around the cabin or trunk while driving. If the accessory does not meet this requirement, it does not protect well from moisture and dirt, it interferes with the driver and passengers, especially when getting in and out, getting underfoot. A poorly secured driver's mat can become a source of danger. when driving, it shifts forward and creates an obstacle to the movement of the control pedals.
The car mat must have a surface that prevents slipping on it.... This is especially important for the driver: his foot should not slip when moving from one pedal to another.
Car mat should be made from sustainable materials, guaranteeing the absence of harmful substances and odors in the cabin.

Types of car mats

Car mats that you can buy from us are made from different materials, which determines the differences in their properties and prices. You can choose the type of accessories that suits you best:

Rubber

Manufacturers offer two types of car mats:

Universal models are suitable for all brands and models of cars. Such accessories have an enlarged format and a simplified form. They are marked with notches throughout the entire area, cutting along which, the dimensions of the product can be adjusted for a variety of machines. Universal car mats can be purchased at a lower price because their cost is lower. However, this advantage has a downside: no such product fits perfectly in size and profile to any vehicle, and after trimming, the appearance deteriorates.

Model car mats are developed individually for a specific car model of a certain year of manufacture, so that the accessories exactly match the floor configuration. Their advantage is a perfect fit to the surface of the passenger compartment or trunk.

Model products prevail in the domestic market: they perform their functions much better than universal ones, and manufacturers, focusing on demand, offer accessories of various materials of manufacture and color for almost all brands and models of cars. In our store there is a wide range of such carpets, and you will surely find the right one for your car!

System of plastic profiles " NOVOLINE» is a complete analogue of the German brand profile « KBE», which allows you not to buy new equipment for processing a profile (To get started, you just need to reconfigure the existing one).

Profile system " NOVOLINE»Is intended for the manufacture of windows and doors for any premises and is specially adapted for Russian operating conditions.

System profiles recipe " NOVOLINE”Was originally developed for the harsh Russian climate. Therefore, the main attention in the development was paid to achieving high frost resistance, UV resistance, strength of welded seams, low coefficient of linear expansion and high coefficient of resistance to heat transfer. All profiles NOVOLINE»Certified as frost-resistant profiles.

PVC profile " NOVOLINE»Is produced on the high-tech lines of the largest plant in Russia, equipped with the most modern extrusion equipment from Germany, each meter of the profile is laser-marked with the time of production, the name of the system and the GOST number. The unique qualities of the plastic are ensured by the original mix recipe specially selected with the participation of specialists from IKA (Germany). All the necessary additives used in our recipe are imported. They include: impact modifier (Rohm & Haas, USA), calcium carbonate (Omya, France).

High quality window constructions based on the profile of the new system " NOVOLINE»Made it possible to establish the latest quality criteria, one of which is technical characteristics.

All system profiles " NOVOLINE»58mm have three internal chambers. With this design and arrangement of the chambers, the profile does not freeze. Heat transfer over the metal is excluded, since the metal reinforcing profile is located in the middle chamber, located between two small chambers, and does not come into contact with the outer walls of the profile anywhere.

5-chamber profile " NOVOLINE»Has an installation width of 70 mm, which allows optimal heat and quietness in the room.

In products created from PVC profiles " NOVOLINE»An elegant appearance is combined with technically and economically viable solutions.