How to choose consumables for your label printer? Single layer receipt tape

The thermal paper receipt tape has a coating on the top layer that develops a barcode, drawing or text when heated. Consumable is used:

• v cash register equipment;
• ATMs, payment terminals;
• medical equipment;
• fax machines.

In the manufacture of the tape, high-quality offset paper with a high whiteness index is used. The density of the material depends on the purpose: for cash registers use less dense paper than for terminals or ATMs. From the front side check tape covered with a chemical composition, when heated, a black image appears (less often blue, red, etc.); thermal paper documents become unusable with prolonged exposure to sunlight.

Advantages of using a material with a thermal layer:

• savings due to the exclusion of ink from the printing process;
• high-quality printing - local heating reveals the smallest details without smudging;
• ease of use - only the paper roller can be replaced, which is easy to install in the device;
• safety - the thermal layer does not contain toxic compounds.

In "Komus" there is a check-tape of well-known manufacturers. There is a special price for online orders and bulk quantities. To clarify the characteristics of consumables for printing machines of specific models, please contact our consultants.

Price label sells quality cash register tape for cash register and receipt tapes for payment terminals, ATMs, cash desks, receipt printers, wholesale and retail.
And also carries out on order printing of advertisements on a receipt tape with a minimum circulation of 2000 rollers... Cash receipt tape from 48g to 125g.

We would like to warn you that on the market almost all cash register tapes are sold with discomfort (less amount of winding in a roller). But this does not mean that you are reflowing. The price corresponds to the number of meters of winding.

Types of receipt tape:

The length of the winding of the rollers can be any - under the order!

Thermal tape (thermochemical receipt tape)

Thermal tape is a single-layer receipt tape with a thermosetting coating, the width of which is most often 57-80 mm, and in some cases 44 mm. Also, the thermal tape can have a different density of the paper base - from 48 to 55 g / m2.

Cash register tape is one of the most demanded consumables. Not a single cash register is complete without such consumable material as a receipt tape, on which the operation of the entire store depends. For this reason, it is very important to buy cash register tape on time.

On a receipt tape of this type, the image is formed due to the effect of temperature on the heat-sensitive coating. In order for the printing device to warn the operator in time about the need to replace the roller, a red strip is applied to the last 1.5 meters of thermal tape.

Types of receipt tape for cash registers, ATMs, equaring:

• single layer;
• two-layer;
• thermo tape;
• offset tape.
• Rollers for queue management systems (coupons)

The order of prices for a receipt tape without printing:

• Cash tape (offset) from 5.30 r.
• Cash tape (thermo) width 80 from 55.72 r
• Cash tape (thermo) width 57 from 15.26 r.
• Cash tape (thermo), art.76x30, st.108 from 45.91 rubles.
• Cash tape, 76 offset tue 12 st.70 from 15.30 r.
• Cash tape (thermo) width 44 from 15.96 rubles.

Single layer receipt tape

One-layer receipt tape is produced in various widths: 37, 40, 44, 57, 69, 76 mm. Rolls of receipt tape can also differ in inner diameter of the sleeve (12mm and 18mm) and outer diameter (from 54 to 70 mm).

It should be borne in mind that the width and diameter cash register tape are selected strictly according to the technical parameters of each specific cash register model. A red stripe is applied to the last 5 meters of the receipt tape so that the printer can prematurely notify the checkout counter employee of its end.

Multilayer (two-layer) receipt tape

A multilayer receipt tape differs from all other types of cash register tapes in that it has two layers at once. Hence its name. The bottom layer of the tape is made of self-copying paper. Therefore, when information is applied to the top layer, it is duplicated on the bottom. The upper part of the tape is given to the customer, while the lower part remains in the cash register. Multilayer cash register tape in our company, the site is made in widths of 44, 55, 57, 69, 76, 80 mm and a diameter of 54 to 70 mm. The inner diameter of the sleeve is only available in one version - 12 mm.

You can order a multilayer receipt tape with one or two active layers from us. We sell white and color receipt tape with printing.

Thermal paper tapes are used:

• in cash registers (cash registers of kkm)
• at ATMs
• equaring (printing a ribbon when paying by credit card)
• in payment terminals
• parking machines
• for queue management systems.

ATM check tape

In ATMs, a check tape with a large winding on a sleeve is used. At cash service, at the end of each monetary transaction The ATM issues the customer a check with all the necessary information about the payment. ATM receipt tape can be of various lengths, sizes and qualities.

Printing advertising on the receipt tape from the reverse side from 2000 rubles

It is also possible in our company. back side cash register tape will be used as a platform for placing a bank logo, emblem or any kind of advertising. ATM receipt tape can be colored. Moreover, it allows the application of a color image up to 4 colors. Printing a bernd advertisement on a check tape allows you to attract the attention of a client, becomes a distinctive attribute of a particular bank and stimulates potential clients to use its services. The advertisement video can be stored without sun and moisture in boxes for up to 2 years!

The technical condition of the ATM as a whole, as well as the printing device installed in it, depends on the quality of the receipt tape. If the tape is made and of good quality paper, it will provide a longer ATM service life. Advertising printing on the check tape on the reverse side is an additional service.

Typical sizes of thermal tape:

• Receipt tape 37 x 60 mm
• Receipt tape 44 x 60 mm
• Receipt tape 44 x 30 mm thermo
• Receipt tape 44 x 40 mm thermo
• Receipt tape 55 x 80 mm thermo
• Receipt tape 57 x 30 mm thermo
• Receipt tape 57 x 40 mm thermo
• Receipt tape 57 x 80 mm thermo
• Receipt tape 57 x 150 mm thermo
• Receipt tape 69 x 60 mm
• Receipt tapes 76 x 60 mm
• Receipt tape 80 x 60 mm thermo
• Receipt tape 80 x 80 mm thermo
• Receipt tape 80 x 120 mm thermo
• Receipt tape 80 x 150 mm thermo
• Receipt tape 80 x 180 mm thermo
• Receipt tape width 80mm, winding 120m with a sleeve size of 25 mm
• Receipt tape with full color printing with roll size 80 * 12 * 80

Receipt tape for equaring (verifone, ingenico)

Thermal tapes are universal and suitable for PinPads: verifone vx520, vx510, vx670, vx675, vx680, vx820, Ingenico ICT220, Ingenico IWL220 and other models. The main thing is to choose the size of the tape, and it is especially important for such devices that small windings (tape length) are required.

Ticket rollers for queue management systems

We sell rolls of checks wound on 1000, 2000 and 3000 checks, which are consumables for Q-matic queue management systems, etc.

We accept orders for thermal rollers for electronic queue(coupons on thermal tape), for different types parking machines, bank terminal.

In special thermal rollers for the electronic queue there are the necessary black marks for the photo sensor of the printing system, as well as there is transverse perforation of coupons for easy tearing off, and an even winding of the tape on the sleeve. Our company PriceEliketka can offer a ribbon of coupons made of thermal paper at market prices. You can order the manufacture of rollers from thermal paper with a density of both standard 55 g / m2, and thick coupons of 70 g / m2.

Also, in systems with an auto-cutter, you can use a conventional thermal tape with a large winding.

Sizes of thermo paper for electronic queue:

• 60x100x25 Q-matic
• 57x100x25
• 57x100x12
• 60x100x25
• 60x100x12 thermo
• 80x80x25
• 60x80x25
• 82.5x150x25
• 82.5x120x25

Rolls of thermal paper for ATMs and payment terminals

The standard roll width is 80mm, and the winding diameter can be from 80 to 250mm, the standard core diameter is 18mm or 25mm. It is possible to print advertising on the reverse side of the receipt tape.

Sizes of rollers for ATMs and terminals:

• 80x120x12
• 80x120x25
• 80x130x18 thermo inside
• 80x140x25
• 80x150x12
• 80x150x25
• 80x180x12
• 80x180x18
• 80x180x25
• 80x200x18 Top sales
• 80x200x25
• 80x210x18 thermal layer inside

How to choose the right size of cash register

The type of cash register that fits your equipment must be indicated in the technical documents attached to the cash register, fiscal registrar or receipt printer.

Very often, receipt tape manufacturers do not rewind on a roller and sell a shorter length. From here they can give more low price... Honest check tape from 12 rubles / 30m. - In stock and on order.

ON A NOTE:

• thermo tape 57 mm wide is the most widespread in Russia and is used on 80% of all autonomous cash registers.
• some cash registers, such as for example Mercury 180, will not fit a roll wider than 45 mm.
• Cash thermo tape 57 mm wide is used on KKM: Mercury 115, Mercury 130, Mercury 180, AMC 100, Elves-Micro.
• Receipt tape made of thermal paper 57 * 30 * 12 winding 30m or winding 19m suitable for ATOL 11F cash register

By contacting the company "1C: Accounting and Trade" (BIT), you can purchase not only software and trade equipment, but also all consumables necessary for its correct operation. For example, you can quickly buy a receipt tape by calling our managers and guarantee the absence of downtime for your trade or service enterprise, because customer service can be carried out only by providing them with confirmation of the purchase or the provision of services.

Our company has an extensive network of regional branches and a wide network of offices in the capital, which allows us to be closer to the client. You just need to contact the nearest office of "1C: Accounting and Trade" (BIT) to satisfy all your wishes related to the installation shop equipment and trade automation. For example, if you need a receipt tape in Moscow, select the nearest one from the list of our offices and contact our professional managers. By purchasing the necessary consumables in BIT, you buy the necessary products High Quality at a reasonable price.

Cash register tape is one of the most demanded consumables needed to keep things running. cash registers, - and therefore the entire store. Therefore, an untimely purchase of a tape can result in serious financial losses. Keep track of how much tape you have left in the store and purchase high-quality consumables from a trusted partner!

Sale of a receipt tape on favorable terms

• The assortment includes a receipt tape for various cash registers. Independently or with the help of experienced specialists of "First BIT", you can easily select consumables that match the installed equipment.
• We sell only high quality receipt tape. You can choose one-, two-layer products for thermochemical, capillary printing.
• All receipt tape is easy to access. You can buy it in the required quantity at the best cost.

Explore the catalog! Do you have any questions? Ask the managers "First BIT". With their help, you will select a check tape of the required type.

The selection of consumables for label printers depends on the type of printing device, its scope. It is also necessary to take into account the operating (storage) conditions of goods or packages with ready-made labels. For deep-frozen food or building materials open storage requires different quality labels and printing on them. How to find the right consumables for your printer?

Types of printers

For printing labels, two types of printers are used, different in printing technology.

• Thermal printers

The principle of thermal printing lies in the direct action of the thermal head on the label with the applied thermal layer. As a result of heating, microcapsules with a coloring matter burst in the thermal layer, and an image appears on the surface.

Thermal printers require the use of thermal coated labels.

• Thermal Transfer Printers

In addition to direct thermal printing on special tape or label paper, this type of printer works in thermal transfer mode. It requires an ink ribbon - a ribbon. The ribbon is placed on the label and the thermal head of the printer moves along it. When heated, the ribbon leaves an imprint of the image on the label material.

Thermal transfer printers require labels and ribbons as consumables.

How to choose consumables for a thermal printer?

A consumable material for a thermal printer is a thermal coated label tape. In trade and services, two types of tape are most commonly used.

• Eco label

• Roller winding. The length of the ribbon in the roller may vary and should be selected according to the specifications of the printer. For desktop devices, 74 m tape is most commonly used. Also popular is 300 m tape, which is used for productive office printers. For industrial models, a ribbon with a roll length of 450 m is used.The most popular option, which is always available, is a ribbon with a winding of 74 m.
• Sleeve size. The most popular size is 12.5 mm. This sleeve is used for 74m rolls and will fit most desktop printers. A tape with a winding length of 300 m can have a core with a diameter of 12.7 or 25.4 mm. Rollers with 450 m winding have a 25.4 mm bushing.
• Width of the tape. It is chosen according to the size of the label. For example, for a 30 mm label, a 40-57 mm tape is suitable (to ensure high quality printing).

The dimensions of the ink ribbon are matched to the capabilities of the printer. V technical characteristics printer specifies which labels and ribbons are appropriate for the model.

How to calculate the number of ribbon rolls for a label?

The distance between labels glued to the liner is usually 2 mm. If you know the dimensions of the labels and the distance between them, you can calculate the length of the entire roller.

For example, label marking 58 * 40 * 600 is deciphered as follows:

• 58 mm - width;
• 40 mm - length;
• 600 - the number of labels of a given size on a roll.

The length of the roller, respectively, is calculated using the following formula:

(label length + distance between labels) * number of labels per roll

In our example, the length of one label roll is (40 + 2) * 600 = 25 200 mm, or 25 200/1000 = 25.2 m.

The ribbon footage is usually 74, 300 or 450 meters. To calculate the required number of rolls of a thermal label, you need to divide the ribbon footage by the label footage obtained above.

For our example, let's take a 300m ribbon: 300m / 25.2m = 11.9 rolls. The ratio of consumables for a printer with a 300 m ribbon and a 58 * 40 * 600 label will thus be 1:12, respectively.

Trade Formula specialists will select a suitable ink ribbon. They will take into account the purpose of labels, storage conditions of goods, the type of printing of the printer. Consumables options can be selected for any budget. Custom sizes labels and ribbon are available on request.

Etiquette tape occupies a special position among consumables for thermal printers and thermal transfer label printers. It is available in any manufacturing, logistics and trading companies that use labels, price tags, stickers with articles, bar codes, size, material, operating conditions, etc., etc. for the purpose of labeling their products. In conditions modern market it is obligatory to place such information for buyers in any way on the products. But the organization also benefits from placing data on products - this greatly simplifies inventory control. It is convenient to apply labels on products in accordance with modern commodity circulation standards with the help of labels in business of any scale - both in small firms and in industrial complexes, large warehouses and hypermarkets. Usually, a printer is used to print information on price tags and labels, and etiquette tape is a consumable for it - a roll of self-adhesive labels. They are called self-adhesive because they have a special adhesive layer applied to them and they are attached to a substrate, wound in rolls on a sleeve made of cardboard or plastic.

The use of etiquette tape with self-adhesive labels during operation has advantages visible to the naked eye:

• self-adhesive labels are easily glued to various materials;
• these labels are firmly attached to products for a long time;
• cheapness nice appearance self-adhesive labels;
• high speed printing of the necessary data using a thermal printer or thermal transfer printer.

Types of self-adhesive labels.

In the POSLAND online store, both labels for thermal printers and labels for thermal transfer printing are always available. The main difference between them is the presence of a specially applied thermal layer on the surface of the label for a thermal printer, due to which the necessary image is created. In order to print a label using a thermal transfer printer, it is necessary to use a label tape without a thermal layer and additionally apply an ink ribbon-ribbon (Zebra tape is especially popular). For printing on a thermal printer, you can buy inexpensive and high quality labels made on special thermal paper.

Unlike cash registers, labels of various sizes can be used for printing on roll-to-roll thermal printers and thermal transfer printers. Therefore, the label printer paper produced today is classified according to the length and width of the label. In our online store you can buy both commonly used etiquette tapes and label rolls of rarely used sizes.

Ribbon labels also differ in the number of labels per roll and the diameter of its core. In order to insert a roll with a label in an industrial or middle-class printer, the roll core must have a diameter within the range of 76 ... 80 mm. Rolls with a core diameter of 25 ... 45 mm are suitable for loading into a printer primary class... Self-adhesive labels are supplied in packages, the number of rolls in which may vary.

In the POSLAND company it is extremely profitable to buy etiquette tape of any type and of any size in the required quantity.