Asu engineer with no experience. Engineer for automated production control systems. What an APCS engineer must know

I. General Provisions

1.1. Engineer for automated systems computing
(information and computing) center (hereinafter - VTS (ICC) refers to
professional category.
1.2. For the position:
- an engineer for automated systems of the computer center (ITC) is appointed a person,
having a higher professional (engineering and economic or technical)
education without requirements for work experience or secondary
professional (engineering-economic or technical) education and
work experience as a category I technician at least _______ years or
other positions filled by specialists with an average professional
(engineering and economic or technical) education, not less than _______
years;
- an engineer for automated systems of the computer center (IVC) category II -


automated systems VTS (IVTs) or other engineering and technical
positions filled by specialists with higher professional
(engineering and economic or technical) education, not less than ________
years;
- an engineer for automated systems of the computer center (IVC) category I -
a person with a higher professional (engineering and economic or
technical) education and work experience as an engineer
automated systems of the computer center (IVC) of the II category at least _______ years;
1.3. Appointment to the position of engineer for automated systems
VTS (IVTs) and release from it is made by order of the head of the VTS (IVTs)
on the submission of ________________________________________________________
(chief production department VTS (IVTs), head

department of development and implementation of the computer center (ITC), other structural unit
center)
1.4. An automated computer systems engineer (ITC) should know:
- decisions, orders, orders of higher organizations,
other normative, methodological and guidance materials for operation
information processing systems and their development;
- prospects for technical development and features of activities
production;
- work principles, specifications;
- design features implemented and used technical
means, materials and their properties;
- design methods, rules and operating conditions of systems
information processing;
- basic requirements for technical documentation,
materials, information and computing services;
- applicable standards, specifications, regulations and instructions
on the preparation and execution of technical documentation;
- methods of carrying out technical calculations and determining the economic
efficiency in the operation and development of systems;
- advanced domestic and overseas experience in the field of application
computer facilities;
- fundamentals of economics, organization of production, labor and management;
- fundamentals of labor legislation Russian Federation;
- internal labor regulations;
- rules and norms of labor protection, safety measures,
industrial sanitation and fire protection;
- _________________________________________________________________.
1.5. Computer Computer Automated Systems Engineer (ITC) is subordinate to
directly _________________________________________________________
(to the head of the computer center (ITC), the head of the production department
________________________________________________________________________.
Computer Center (ITC), Head of the Development and Implementation Department of the Computer Center (ITC); to the head
other structural subdivision of the computer center (ITC)
1.6. During the absence of an automated systems engineer
VTS (IVTs) (vacation, illness, business trip, etc.) performs its duties
person appointed in established order... This person acquires
relevant rights and is responsible for the quality and
timely fulfillment of the duties assigned to him.
1.7. ______________________________________________________________.

II. Job responsibilities

Computer Computer Automated Systems Engineer:
2.1. Carries out work on the development, implementation and operation of systems
automated and mechanized information processing.
2.2. Develops methodological and regulatory materials, technical
documentation, as well as suggestions and support activities
developed projects and programs.
2.3. Conducts technical and economic analysis, comprehensively substantiates
decisions taken and implemented, seeks opportunities to reduce
cycle of performance of works (services), contributes to the preparation of the process of their
execution, provision of the necessary technical data, materials and
equipment.
2.4. Participates in works on pre-project survey, developing
projects and programs in carrying out the necessary activities related to
trial operation, testing of equipment and materials, in
consideration of various technical documentation and prepares
necessary reviews, reviews, conclusions.
2.5. Examines and analyzes the necessary information, technical
data, indicators and results of work, summarizes and systematizes them,
conducts necessary calculations using modern technical means.
2.6. Draws up work schedules, orders, applications, instructions,
explanatory notes, maps, diagrams and other technical documentation, and
also the established reporting in the approved forms and in the established
terms.
2.7. Provides methodological and practical assistance in processing,
preparation and transmission of information, implementation of projects and programs, plans
and contracts.
2.8. Carries out examination of technical documentation, supervision and
monitoring the condition and operation of equipment, identifies reserves,
identifies the causes of system failures and failures of solutions and malfunctions in
operation of the equipment, takes measures to eliminate them and increase
efficiency of use.
2.9. Monitors compliance established requirements operating
norms, rules and standards.
2.10. Organizes work to improve scientific and technical knowledge
employees, training of personnel in the workplace.
2.11. Promotes the development of creative initiative, rationalization,
inventions, implementation of domestic and foreign achievements in
the field of operation and design of information processing systems,
use of best practices to ensure effective work funds
computing technology.
2.12. _____________________________________________________________.

III. Rights

An automated computer systems engineer has the right to:
3.1. To get acquainted with the draft decisions of the head of the computer center (ITC) and
heads of structural divisions of the center concerning its
activities.
3.2. Submit proposals for the management of
improving the work related to the duties provided for
this manual.
3.3. Within the limits of their competence, inform _________________________
(to the head of the computer center (ITC),

head of the production department of the computer center (ITC), head of the department
_________________________________________________________________________
development and implementation of the computer center (ITC); head of other structural
subdivisions of the computer center (ITC)
about all identified in the process of exercising their official duties
shortcomings in the activities of the center (its structural divisions) and
make proposals for their elimination.
3.4. Request in person or on behalf of a direct
leaders from the heads of departments of the center and specialists
information and documents required to carry out their duties
responsibilities.
3.5. Involve specialists from all (individual) structural
divisions to solve the tasks assigned to it (if provided
regulations on structural divisions, if not - with permission
head of the Computing Center (ITC).
3.6. Require the leadership of the center to assist in
performance of their official duties and rights.
3.7. ______________________________________________________________.

IV. A responsibility

The Computer Computer Automated Systems Engineer (ITC) bears
a responsibility:
4.1. Per improper performance or failure to fulfill their duties
duties stipulated by this job description - in
the limits determined by the labor legislation of the Russian Federation.
4.2. For offenses committed in the process of exercising their
activities - within the limits determined by the administrative, criminal and
the civil legislation of the Russian Federation.
4.3. For causing material damage - within the limits determined
labor and civil legislation of the Russian Federation.

Download the job description of an engineer
on automated production control systems(.doc, 90KB)

I. General Provisions

  1. An engineer for automated production control systems belongs to the category of specialists.
  2. For the position:
    • an engineer for automated production management systems is appointed a person who has a higher professional (engineering and economic or technical) education without presenting requirements for work experience or secondary vocational (engineering and economic or technical) education and work experience in the position of a category I technician for at least 3 years or other positions filled by specialists with secondary vocational (engineering and economic or technical) education, at least 5 years.
    • an engineer for automated production management systems of the II category - a person who has a higher professional (engineering and economic or technical) education and work experience as an engineer for automated production management systems or other engineering and technical positions replaced by specialists with a higher professional (engineering and economic or technical) education, at least 3 years;
    • an engineer for automated production control systems of the 1st category - a person who has a higher professional (engineering-economic or technical) education and work experience as an engineer for automated production management systems of the 2nd category for at least 3 years.
  3. Appointment to the position of an engineer for automated production control systems and release from it is made by order of the director of the enterprise on the proposal of the head of the automated production control system.
  4. An automated production control systems engineer should know:
    1. 4.1. Resolutions, orders, orders, methodological and regulatory materials on the organization of automated production control systems.
    2. 4.2. Prospects for the development of the enterprise.
    3. 4.3. The organization economic planning and operational regulation of production.
    4. 4.4. The structure of the enterprise, production and functional links between its departments.
    5. 4.5. Tasks and content of the automated control system.
    6. 4.6. The procedure for the development of projects of the automated control system and its subsystems, technical specifications, technical and working projects.
    7. 4.7. Economic and mathematical methods.
    8. 4.8. Foundations of the theory of economic cybernetics.
    9. 4.9. Computer facilities, communications and communications.
    10. 4.10. The order of setting tasks, their algorithms.
    11. 4.11. Determination methods economic efficiency implementation of automated control systems.
    12. 4.12. Standards for a unified system of organizational and administrative documentation.
    13. 4.13. The procedure for the development and execution of technical documentation.
    14. 4.14. Fundamentals of economics, organization of production, labor and management.
    15. 4.15. Fundamentals of Labor Law.
    16. 4.16. Labor protection rules and regulations.
  5. An engineer for automated production control systems reports directly to the head of the department of automation and mechanization of production processes.
  6. During the absence of an engineer for automated production management systems (vacation, illness, etc.), his duties are performed by a person appointed in accordance with the established procedure. This person acquires the corresponding rights and is responsible for the proper performance of the duties assigned to him.

II. Job responsibilities

Engineer for automated production control systems:

  1. Carries out work on the design and implementation of automated production control systems (ACS) based on the use of a set of economic and mathematical methods, modern means computing, communications and communications, elements of the theory of economic cybernetics.
  2. He studies the system and methods of management and regulation of the enterprise, its production and functional divisions, determines the possibilities of formalizing the elements of the current system and the feasibility of transferring the corresponding processes to an automated mode.
  3. Prepares the necessary data and participates in the preparation of technical specifications for the design of the automated control system and its individual stages and subsystems, in the development of technical and working projects.
  4. Formulates the setting of tasks, performs work on their algorithmization, identifies the possibilities of typing solutions of individual elements of the system, prepares proposals for the use of standard blocks in the design of automated control systems and participates in their creation.
  5. Examines systems developed by design organizations and operating at other enterprises automated control production in order to use the best experience in the design and operation of automated control systems.
  6. Takes part in the work to improve the workflow at the enterprise, formulates the requirements for the content and construction of technical, organizational and administrative documentation used in the automated production control system.
  7. Develops technological schemes processing information on the established tasks of the automated control system, taking into account the organizational and technical support across all subsystems.
  8. Prepares projects teaching materials, instructions and other technical documentation related to the creation and use of funds for information use of automated control systems.
  9. Participates in debugging, trial operation and stage-by-stage commissioning of a complex of technical means of automated control systems.
  10. Carries out designer supervision and periodic control of incoming and outgoing documentation.
  11. Studies the causes of failures and violations in the system, develops proposals for their elimination and prevention, for improving the quality and reliability of the automated control system.
  12. Provides methodological assistance to the divisions of the enterprise in the preparation of data for the automated control system, on the design required documents and decryption of information processed by computer technology.

III. Rights

An engineer for automated production control systems has the right to:

  1. To get acquainted with the projects of decisions of the management of the enterprise concerning its activities.
  2. Submit proposals for improving the work related to the responsibilities provided for in this job description for the management's consideration.
  3. To inform the immediate supervisor of all deficiencies in the production activities of the enterprise (its structural divisions) identified in the course of the performance of their duties and make proposals for their elimination.
  4. Request, personally or on behalf of a direct supervisor, from the heads of the enterprise departments and specialists, information and documents necessary for the performance of his official duties.
  5. To involve specialists from all (individual) structural divisions in solving the tasks assigned to him (if this is provided for by the provisions on structural divisions, if not, then with the permission of the management).
  6. Require the management of the enterprise to assist in the performance of its duties and rights.

IV. A responsibility

An automated production control systems engineer is responsible for:

  1. For improper performance or non-performance of their official duties provided for by this job description - within the limits determined by the current labor legislation of the Russian Federation.
  2. For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of the Russian Federation.
  3. For causing material damage - within the limits determined by the current labor and civil legislation of the Russian Federation.

Qualification handbook of positions of managers, specialists and other employees
(approved by the decree of the Ministry of Labor of the Russian Federation of August 21, 1998 N 37)

Engineer for automated production control systems

Job responsibilities. Carries out work on the design and implementation of automated production control systems (ACS) based on the use of a set of economic and mathematical methods, modern computer technology, communications and communications, elements of the theory of economic cybernetics. He studies the system and methods of management and regulation of the enterprise, its production and functional divisions, determines the possibilities of formalizing the elements of the current system and the feasibility of transferring the corresponding processes to an automated mode. Prepares the necessary data and participates in the preparation of technical specifications for the design of the automated control system and its individual stages and subsystems, in the development of technical and working projects. Formulates the setting of tasks, performs work on their algorithmization, identifies the possibilities of typing solutions of individual elements of the system, prepares proposals for the use of standard blocks in the design of automated control systems and participates in their creation. He studies the automated production control systems developed by design organizations and operating at other enterprises in order to use the best experience in the design and operation of automated control systems. Takes part in the work to improve the workflow at the enterprise, formulates the requirements for the content and construction of technical, organizational and administrative documentation used in the automated production control system. Develops technological schemes for processing information on the established tasks of the automated control system, taking into account the organizational and technical support for all subsystems. Prepares drafts of teaching materials, instructions and other technical documentation related to the creation and use of funds for information use of automated control systems. Participates in debugging, trial operation and stage-by-stage commissioning of a complex of technical means of automated control systems. Carries out designer supervision and periodic control of incoming and outgoing documentation. Studies the causes of failures and violations in the system, develops proposals for their elimination and prevention, for improving the quality and reliability of the automated control system. Provides methodological assistance to the divisions of the enterprise in the preparation of data for the automated control system, in the preparation of the necessary documents and decryption of information processed by computer technology.

Must know: decisions, orders, orders, methodological and regulatory materials on the organization of automated production management systems; enterprise development prospects; organization of economic planning and operational regulation of production; the structure of the enterprise, production and functional ties between its departments; tasks and content of the automated control system; the procedure for the development of projects of the automated control system and its subsystems, technical specifications, technical and working projects; economic and mathematical methods; foundations of the theory of economic cybernetics; computer facilities, communications and communications; the procedure for setting tasks, their algorithms; methods for determining the economic efficiency of the implementation of automated control systems; standards for a unified system of organizational and administrative documentation; the procedure for the development and execution of technical documentation; fundamentals of economics, organization of production, labor and management; fundamentals of labor legislation, rules and norms of labor protection.

Qualification requirements.
Engineer for automated production control systems of the I category: higher professional (engineering-economic or technical) education and work experience as an engineer for automated production control systems of the II category for at least 3 years.
Engineer for automated production management systems of the II category: higher professional (engineering and economic or technical) education and work experience as an engineer for automated production management systems or other engineering and technical positions replaced by specialists with higher professional (engineering and economic or technical) education , not less than 3 years.
Engineer for automated production control systems: higher professional (engineering and economic or technical) education without requirements for work experience or secondary vocational (engineering and economic or technical) education and work experience as a technician of the 1st category for at least 3 years or other positions, replaced by specialists with secondary vocational (engineering and economic or technical) education, at least 5 years.

This will be discussed in this article.

About the profession

How can you briefly describe the profession in question? An ICS engineer is a person who is involved in various management and control processes, namely their automation. Also, this specialist designs control devices and develops control algorithms. The engineer is obliged to carry out a full and integral complex of works in terms of adjustment, commissioning, maintenance of the automated process control system.

The main part of a specialist's work consists in setting up and configuring the existing software of the software and hardware structure for a specific automation object. The employee must carry out special work on setting up the start-up of the APCS systems, must develop special schematic solutions for automation cabinets (and this also includes the selection of equipment). To describe in more detail the entire working process of a representative of the profession in question, only a consideration of the main job responsibilities of the employee, as well as a list of things that a competent specialist should know, will help.

What is an industrial control system engineer obliged to know?

A representative of the profession in question must have a huge amount of knowledge and skills. Among other things, a specialist in the field of an automated TP control system must also have certain qualities and character traits. This includes, for example, resistance to stress, attentiveness, patience, good memory, and much more.

However, it is worth returning to the knowledge of an ICS engineer. So, the job description of this specialist prescribes the following:

  • the employee must know the automated control system, namely its content, functions and tasks, the procedure and methods for developing projects, etc .;
  • the basis of economic and mathematical methods;
  • economic foundations;
  • labor legislation;
  • the basis of cybernetics;
  • all documentation standards;
  • basics of labor protection and safety

And much more. Thus, an APCS engineer must have a sufficiently wide amount of knowledge necessary to conduct labor activity.

Responsibilities and functions of an automated process control system engineer

The representative of the profession in question is endowed with a rather large spectrum job functions... Below, only the most basic responsibilities of an automated process control system engineer will be highlighted.

  • The employee is obliged to perform work related to the design and implementation of automated control systems based on the use of mathematical and economic methods.
  • The specialist is obliged to study and analyze all possible methods of managing the activities of the enterprise.
  • The employee must prepare all the data necessary for work, and also draw up technical assignments for the design of the automated control system.
  • The employee is obliged to develop an automated control system.
  • The specialist should supervise and also assist in the development of systems and circuits.

Of course, an ICS engineer has many other responsibilities and functions. A complete list of them can be found in the employee's job description.

The rights of an ACS TP engineer

Like all workers employed in different places, a member of the profession in question has many different professional rights. Below, only the most basic rights of an ICS engineer will be named.

  • The employee is able to get acquainted with the projects and plans of the management (but only if they in any way relate to the work of the specialist in question).
  • The employee is able to submit to the management various plans, ideas and proposals for the optimization or modernization of the enterprise.
  • The specialist is able to inform the management about various faults, shortcomings and shortcomings in the enterprise. Also, the employee can offer some of his ideas to eliminate these shortcomings.
  • An employee can request from his superiors all documents necessary for the performance of labor activities. In addition to documents, an employee may require from management certain tools or elements necessary to complete the work.
  • Attracting specialists from other areas for the sake of solving any job tasks also included in the list of specialist rights.

Responsibility of an ACS TP engineer

A large number of functions of varying complexity have an ACS TP engineer. The duties of this specialist give rise to enormous responsibility. What can a representative of the profession in question be responsible for?

Here are just a few points from the job description:

  • The employee is fully responsible for the full performance, or for the performance, but in an inappropriate manner, of his job functions and duties.
  • The employee is obliged to be responsible in accordance with applicable civil and labor codes RF, if he caused the company material damage or other harm.
  • The worker is responsible for offenses or crimes committed in the workplace.
  • It is the employee's responsibility to conduct any unplanned or unauthorized experimentation in the workplace.

There are other points on which the employee can be held responsible for his actions or inactions. Above, however, the most basic points were named, namely, those that are prescribed by the job description of an automated process control system engineer.

Duties of the lead engineer of the APCS

Who is a Leading Process Control System Engineer? It will not be so easy to answer this question properly. However, it is still possible to draw up a relatively holistic picture - if you list the main functions and responsibilities of this specialist. The APCS prescribes practically nothing about this specialist. The employee, of course, has a list of responsibilities. These include, for example:

  • timely passage of honey. inspections;
  • observance of labor discipline;
  • a specialist is responsible for all the functions of an automated process control system engineer, etc.

However, the main labor functions are not given in the instructions. From this we can conclude that the specialist in question is, one might say, the "headman" in the field of ACS. All the duties of an ordinary engineer are shifted to the leading engineer, however, some managerial functions are also assigned to him.

What should the head of the APCS department know?

The work in question is quite complex and responsible. An ICS engineer is a really important person.

And what about the head of the APCS department? The first thing worth noting is what knowledge the specialist in question should have. Job description prescribes that the head of the department:

  • must know all the prospects for the development of the organization;
  • must thoroughly know the structure and mechanism of the organization;
  • must understand the procedure for developing projects at the enterprise;
  • must know all the standards and norms established in the organization.

The head of the department should know many other things as well.

The first group of duties of the head of the APCS department

The official in question has a much larger number of duties than the lead engineer of the automated process control system. The job description prescribes the following functions for the head of the department:

  • the employee manages the implementation and development of projects based on mathematical and economic methods, means of communication, elements of the theory of cybernetics and economics, etc.

  • The specialist is obliged to organize research of the TP ACS system, as well as monitor the order and planning of production in order to transfer certain processes to automatic mode.
  • The specialist is obliged to study the problems of the TP ACS system.
  • The head of the department is obliged to periodically draw up technical specifications for certain production processes.

The second group of duties of the head of the APCS

The specialist in question is obliged to ensure the preparation of plans for the implementation and design of an automated process control system, as well as monitor the implementation, the setting of tasks, their algorithms, the coordination of technological support, the creation and implementation of certain standard blocks.

The head of the department must organize some types of work to modernize and improve the circulation of documents in production. This includes, for example, defining the output and input documentation, the order of output and input, transmission over glue pipes, etc.

The specialist in question must also supervise the preparation of certain instructions, methodological materials, and other documentation. It is also worth noting that all other work with documentation in production must be coordinated with the head of the department.

Similar publications