Chain-link mesh business. Own business: production of chain-link mesh. Business plan for the production of the chain-link mesh: equipment, technology and necessary documents. Chain-link mesh production: drawing up a business plan

Nowadays, most summer residents prefer to use them for fencing their plots and for the logical distribution of the terrain into sections.

The chain-link mesh is an invention of the engineer Karl Rabitz, who at one time came up with the idea of ​​using rolls of knitting wire to create an effective, very convenient and at the same time quite cheap fence.

1 Features of mesh and wire

The chain-link mesh is a special type of mesh made from braided wire. The wire is taken thin, up to 3 mm in diameter. Most often, samples with a cross-sectional size of 1-1.5 millimeters are used.

The wire is knitted on a special machine, interwoven into a mesh with rectangular cells of certain sizes.

The convenience of using a chain-link mesh is obvious. Its weight is quite low, you can assemble the structure yourself. Wire consumption is comparatively small, easy to determine and does not hit the budget.

At the same time, the fence performs its tasks. Its dimensions are sufficient to qualitatively protect the site from the street, thereby protecting your space from unwanted guests, animals, etc.

They use it for a wide variety of tasks, from fencing animal enclosures to full-fledged fences at security companies.

The wire itself plays an important role. It is the only and main component of the mesh, therefore its characteristics, dimensions and thickness have a huge impact on the final result.

See also: what are the advantages, and where can it be applied?

In terms of the diameter of the section, as we have already noted, the samples are selected rather thin, their thickness rarely exceeds the 2 mm mark.

For a large-sized mesh, the use of which is reasonable at army or industrial facilities, models and thicker can be used, but in civilian conditions there are no particular advantages from it, and the production price of a thick mesh of the chain-link is much higher.

1.1 Coverage

The second point is coverage. The coating of the wire affects how long it will last under the operating conditions.

By the type of coating, the wire for the fence the chain-link is:

1. Black.
2. Polymerized or plasticized.

Black wire is a wire for a fence that has not been processed by anything. It is cast from standard grade rough steel. This steel is very good and is perfect for fastening a fence, if not for its weak resistance to corrosion.

The fence mesh made of a black wire sample will begin to rust in a few years, and after a dozen it will completely rust. Not that this is a very big problem.

The fence will not crumble due to rust, but will lose its presentation, as well as the initial strength indicators.

Galvanized wires for mesh are the simplest and most effective solution... Galvanized mesh withstands the influence of external factors longer, less likely to corrode.

However, galvanized products will also begin to deteriorate over time, but much later. But it is more durable, is not inferior to the first option in strength and does not cost much more.

Polymerized or plasticized mesh is the most popular and convenient option. Here, steel wires are coated with polymer compounds, forming a kind of protective sheath.

2 Manufacturing

Many are interested in whether it is possible to create a chain-link type mesh with their own hands. After all, modern manufacturers have managed to use a minimum of equipment and materials for such tasks.

Indeed, in order to form a high-quality mesh, huge workshops and production lines are not needed. It is enough to have a single high-quality material.

The chain-link is not weaved by hand... It is a hard, ungrateful and monstrously slow mode of production.

See also: in which companies can you order?

It is much more reasonable to use modern automatic or semi-automatic, where the process is reduced to cutting wires of the required length, feeding them to the machine, and then braiding them in the right order.

This work is performed by the machine operator. During a shift, he makes several tens of square meters of mesh with cells of 50 × 50 mm. It is impossible to give exact performance indicators, because a lot depends on the type of wires, the efficiency of the machine, the size of the cells, the efficiency of the operator himself, etc.

2.1 Production of a chain-link on a semiautomatic machine (video)

2.2 Material consumption

Material consumption is easy to detect. For this, there is an understandable and easy formula that allows us to quite accurately understand how much production is needed and how much it will cost us.

The formula is based on the ratio of several indicators. The nominal weight of raw materials for the mesh, the mesh size of the mesh (the mesh size directly affects the consumption) and the wire diameter are taken into account.

So, consumption formula for 1 square meter of chain-link as follows:

13.40 * D 2 / A, where

• 13.40 is a constant coefficient corresponding to the consumable weight;
• D 2 - wire diameter squared;
• A is the size of the cell (if the cell is 50 × 50 mm, then in A we write 50, if 35 × 35 mm, then in A we write 35, etc.).

The result is the weight of the wire, or the weight of the roll, which must be used to form 1 square meter of chain-link of the required dimensions.

For a standard chain-link intended for use in civilian conditions with a cell size of 55 × 55 mm, the weight of the material expended, and therefore its consumption, is 0.6 kg per 1 m 2.

Woven mesh netting with cells 50 × 50 mm

Using such a simple, but at the same time effective scheme, you can easily determine the weight and consumption of any types of chain-link.

2.3 Manufacturers

Weaving a chain-link is permissible and profitable only if you are absolutely confident in your abilities and clearly understand why you need it.

Buying even a manual machine - serious investment money. They will not pay off as soon as you might want.

That is why, for trivial and small tasks, it makes sense to simply turn to well-known manufacturers and buy products of the quality you need.

Fortunately, there are too many manufacturers on the market. The process of weaving a chain-link is so simple that factories for its manufacture are located in almost every major city.

• UkrTransMetal;
• Private Enterprise "Hardware-94".

The former are engaged in large-scale production of a huge amount of metal and wire products, from knitting clamps for fittings to full-fledged protective sections.

The latter are less popular, but they offer their products at a lower price with excellent quality.

The wire for the chain-link from these manufacturers is very high quality and durable, it is sold in a huge number of varieties.

2.4 Installation

An interesting point concerns the fastening of the mesh as a full-fledged fence. They use different ways for fastening. The choice depends on your wishes and working conditions.

So, the simplest and at the same time very effective way is to plant the chain-link in advance. Fasteners in this case are made from cheaper or special fasteners.

If the situation requires it, then a rigid wire or thin reinforcement is passed through the lower and upper parts of the cells. It will stabilize the plane of the fence, making it much more stable.

The second mounting option is the installation of individual sections, where the previously cut chain-link is attached to a full-fledged section, consisting of a metal frame, and then, as a component of the fence, is planted on ready-made monolithic pillars.

Such a structure is considered much more mobile, it is easy to repair and modify it, but it will take more time to work, the help of a welder may be needed. This, in turn, increases the final cost of the fence.

On the eve of hot months, both literally and figuratively, entrepreneurial people are interested in the so-called seasonal business. This is especially true for those who do not have a permanent job. “I have a typical story of a post-Soviet man,” says a certain Sergei Ivanovich Konevodov at the Business as Survival forum. - I was an adjuster of powerful presses at an engineering plant. The enterprise was closed. The workshops were destroyed. And in their place they erected shopping center... My profession is not in demand at all. Our town is not that degrading, but clearly not successful. Therefore, I use the summer to the maximum to make good money. At the same time, I don’t want to become a farm laborer. I am looking for a seasonal idea for a business with a minimum start, but with a guaranteed income. "

We asked our expert Igor Malyugin, an analyst of the startup community, to answer this question. “If we talk about the summer business with the least risks, then the best thing is to focus on construction and agricultural work,” Malyugin believes. - I would classify as a universal product that can be started from a minimum start chain-link mesh". The expert substantiates his position with a number of positive factors, which we decided to talk about.

Universal fence material

Browsing the forums and blogs showed that there is a certain disappointment in the market for this product. “There is a lot of competition, so it’s difficult to count on a large income,” the forum member is sure of the Guest_from_past. “And in general, people look down on the chain-link, they say, it’s not an image.” And this kind of posts can be found in a great variety.

Meanwhile, in the United States, the production of this material is growing. Thus, the publication "Home Construction" states that the Rabitz mesh is still of interest to the consumer. “It has a great combination of price and functionality,” writes journalist Mike Hopps of Home Construction. - Protect the plantation from forest rodents and hares ... create an open-air warehouse ... start construction ... all this is accompanied by the construction of a mesh fence. Americans are too practical to spend money where savings can be made. ”

Indeed, a chain-link fence is three times cheaper than a corrugated board fence, five times cheaper than a wooden plank fence, nine times cheaper than a metal picket fence, and so on. “If we add the cost of time to this argument, then there is no competition for the chain-link,” says Mark Katz, an analyst at ORFEI.ltd agency. - As for the skepticism associated with its production, it just has a seasonal limitation. This is a business for those who want to make money in the summer.

At the same time, the expert warns that the factor of competition must be taken into account. For example, for a territory where up to 10 thousand people with average incomes live, one entrepreneur is quite enough. On the other hand, market saturation can be judged by value. In particular, a ten-meter roll (height 1500 mm) with a cell of 50x50 mm, made of galvanized wire 1.8 mm, should not cost more than 1000-1200 rubles for retail... “A higher price may signal the absence of normal competition,” Malyugin said. - Since the cost of this product for Russian conditions is unlikely to exceed 500-600 rubles for the specified roll. "

Since the Rabitz mesh is in demand, the machines for its production, taking into account the relative simplicity of the mechanisms, are also represented by a wide variety. “There are good Ukrainian and Russian machines, there are also Chinese ones - attractive in price, there are also advanced equipment from Italy, Germany and even New Zealand,” says sales manager Alexander Degtyarev from Moscow. - Remember that any salesperson will promise that the machine will operate “normally”. However, it would be reasonable to ask if there is a bending knot and how the winding on the pipe takes place. Second, you need to find out how much they cost braiding worm and "Knives" and how easy it is to get them, since they are consumables. Third, when it comes to automatic machines, how much have the spiral's reliability problems been solved, that is, how often does it fly out? And what if the wire gets stuck in the pickup? "

A responsible approach to the choice of a machine, including taking into account the opinion of those who have already worked on it, can prevent start errors. This is especially important when it comes to automatic machines, since they are not cheap for seasonal business... For example, an automatic machine tool ASU-174M will cost an entrepreneur 230,000 rubles, you still have to spend money on the delivery of equipment depending on the region, plus 50-55 thousand rubles will be spent on the purchase of the first batch of wire (1.5 tons). At the same time, the cost of a roll, which includes the operator's salary and rental of premises, will not exceed 500 rubles.

However, many entrepreneurs believe that they should start with a semiautomatic device.

“Why grab a machine gun right away? - writes the forum member am0n. - The investment is large, plus one more big minus: on the machine, of course, you can safely "smoke bamboo" and only remove the rolls on one condition: if you have good wire. Now the wire is made in such a way that from one coil you have to set up the machine 10 times, but the machine is not set up so quickly. To start production, and generally to probe the soil in this area, it seems to me better to take a semiautomatic device. He is less capricious about the quality of the wire, and everything is set up much faster: in a minute you are working again. Yes, there is a minus that you have to stand at the table yourself, bite off and, if necessary, bend the ends. "

And in fact, many machines for the production of chain-link mesh are notable for their low cost with relatively reliable operation. So, the Chelyabinsk one can be purchased for 45 thousand rubles, while it will be equipped with a weaving mechanism, a trigger pedal, a control unit connector, a wire unwinding device and replaceable pulleys and a screw sleeve with a knife. The manufacturer guarantees ease of training and maximum productivity within two weeks after starting work.

Confessions of an entrepreneur

In runet we found a story about production of netting chain-link"from scratch". It was told by a certain MeXaHiK on the forum, which was called “Own business”.

Sincerely, Victor!!!"

Igor Malyugin believes that this story accurately characterizes the Rabitz mesh production business. “This business can be successful if the entrepreneur has the skills to repair and adjust equipment, as well as natural diligence and a bright mind,” the expert is convinced.

An article about the production of a chain-link mesh, a machine (equipment for it), calculation of profitability, video of the manufacturing process, approximate prices for one roll. Suitable as an example for a business plan.

Basically, the netting is used for fencing areas. If it is not protected from rain, then immediately after the first rainfall it will be covered with rust. The chain-link mesh is protected from corrosion in several ways: painting, galvanizing and using a polymer coating. The most common way to protect the mesh netting from corrosion is galvanized. Manufacturers, as a rule, do not paint, since all the paint simply follows due to the constant friction of the mesh in the rolls.

Consider information that will help you in drawing up your business plan for this business.

Equipment for the production of mesh netting - machine

In order to organize your business for the production of chain-link mesh, you first need to buy all the necessary equipment. These can be either automatic (automatic) or semi-automatic machines.

Video of the production process with a simple machine:

Semi-automatic machines require an operator who monitors the entire production process and is directly involved in it. Such a device is easy to use, easy to set up, relatively small in size and cost about 40,000 rubles.

Using automatic machines, you will be able to organize production in such a way that all its processes will take place automatically without the participation of an operator. But the price for such a machine will fluctuate between 200,000-250,000 rubles.

Video of the machine:

Such an automaton is quite compact.

The monetary costs that go to the purchase of a machine for the production of a chain-link mesh will have to amount to 35,000-40,000 rubles.

Before buying a machine, you need to find a production facility. It can be a warehouse or a garage. The area of ​​the selected room should be 10-20 sq. meters. The room is used for the production and storage of the finished chain-link mesh. In most regions of Russia, monthly rent of such premises will cost several thousand rubles.

Wire for the production of chain-link mesh and its corrosion

In order to master the machine and get the first batch of chain-link mesh with it, you need to purchase wire. 500 kg of net worth 17,500 rubles is enough for you.

Low-carbon steel wire is used as raw material for the production of the netting. Along with steel wire, polymer coated and galvanized wires are used. It is extremely rare for a chain-link mesh to be made of stainless wire.

Most mesh "coated" chain-link is made from galvanized steel wire. Therefore, the amount of zinc on the galvanized wire is very important. Most of the factories in the CIS countries cover the wire with zinc by hot-dip galvanizing. With this method, the zinc content on the wire ranges from 70 to 90 g / m 2. The mesh netting made of such wire will not rust for 20-25 years. Recently, they began to master the coating of wire by the electrolytic method. But when the wire will contain only 10 g / m 2 zinc, which, in turn, is very little. A mesh made from such a wire begins to rust within a year or two after the start of its operation.

However, if the chain-link mesh is operated on the coast of the salty sea, then even a large amount of zinc cannot save it from corrosion. In such areas, it is recommended to use polymer coated steel wire mesh.

Calculation of income and expenses

Here are the average values, so in your case the numbers may differ both up and down.

Raw materials

We calculate the costs that go to the production of one roll of chain-link mesh. One ton of wire costs about 35,000 rubles. The weight of a roll of mesh of a chain-link made of wire having a diameter of 1.6 mm and a mesh size of 55 mm will be approximately 9.5 kg. The cost of such a roll, taking into account the amount of wire spent, is 333 rubles.

Wages to workers

As a rule, the salaries of employees in large cities are higher than in small towns, and even lower in villages. We will consider the wages of the machine operator using the example of Stary Oskol. Let it be 16,000 rubles in 22 working days. Let's take into account that it is better to pay the salary depending on the number of mesh rolls produced. During one shift, 11 rolls or 22 rolls are produced per day. Then the production of one roll should be paid 70 rubles.

Electricity costs

The price of 1 kW / h is approximately 4 rubles. The energy consumed by the machine for the production of the chain-link mesh is 1.5 kW / h. But in addition to making the mesh, rolls are also packed and loaded onto racks. This means that a little less than 1.5 kW / h will be spent in 1 hour. Then we assume that 1 kW / h of energy is spent for the manufacture of one roll of chain-link mesh.

Premises for rent

The rent for the premises will be calculated as a share to one roll of netting netting produced. 22 rolls will be produced in one day. In 22 working days (1 month) - 484 rolls. As a result, we get an amount of 2-4 rubles.

Additional costs for taxes, transport, etc. will be 10-20 rubles per roll.

Total cost

For one roll of mesh, a chain-link made of 1.6 mm wire and a mesh size of 55 mm, the cost price will be as follows:

Wire price (333 rubles) + worker's payment (70 rubles) + electricity costs (4 rubles) + rent (2-4 rubles) + additional costs (10-20 rubles) = 419-431 rubles ...

Production profitability

Having calculated the production cost of one roll of netting netting, let's calculate the income per one roll of netting. To do this, you need to find out the cost at which the produced mesh will be sold. In turn, for this you need to study the prices of competitors' products.

The wholesale price for a mesh netting with a mesh size of 55 mm and made of wire 1.6 mm thick is about 600 rubles per roll. The profit should be:

• 600 - 419 = 181 rubles.
• ... or 600 - 431 = 169 rubles.

The calculations were made taking into account the fact that the average retail price for a chain-link netting in Russia is about 1000 rubles.

To calculate the monthly profit, you need to multiply the obtained values ​​by the number of rolls that are produced in one month. In our case, it is equal to 484. Then the monthly profit should be 87604-81796 rubles.

According to the calculations obtained, we conclude that the costs that we have at the initial stage can be recouped in just one month. In addition, you can organize the sale of the netting netting at a higher retail price.

The do-it-yourself mesh netting is relatively simple to make, you just need to master the basic principles of the technology of its production at home and have some skills in performing the simplest locksmith operations.

1

For suburban areas, without exaggeration, the ideal option for arranging an elegant and functional fence is a chain-link. It can be installed independently, it does not shade the garden and vegetable garden, as solid types of fences do. And purely outwardly, the mesh fence looks more airy and bright. With proper installation, such a fence will serve for several decades without losing its original appearance. In this case, any care for her is usually not required.

Also, the independent weaving of the chain-link can be considered as commercial activities... Such a business will not bring very high profits, since the cost of steel wire, which is required for the manufacture of the mesh, is quite high. But if you periodically order a chain-link (for example, neighbors in a summer cottage), a good appendage to the basic salary will be guaranteed. You can make a grid in your spare time and sell it at an affordable price.

2

The simplest device on which you can make a mesh with the most popular mesh sizes 80 by 80, 60 by 60 and 45 by 45 millimeters is a structure consisting of the following elements:

• feed drum;
• section ;
• metal rollers;
• bending machine.

An ordinary household bucket can act as a drum. It will need to be turned upside down and placed on a wide wooden board, fixing it with some kind of weight (thereby we will save it from falling during the process of weaving mesh products).

We will wind the wire onto this homemade feeder, and then we will feed it to the channel with the rollers installed on it (three of them will need to be mounted).

By changing the position of the middle roller, you can control the force required to tension the steel material. For high-quality rotation of the rollers mounted on bolts, it is recommended to put on them small in thickness (from 1 to 1.5 millimeters) limiting washers.

The bending machine is also made independently from thick-walled steel pipe. In it, a spiral groove is cut out at an angle of 45 degrees to the axis (approximately 4–5 millimeters). The end of the specified groove (about five centimeters from the end of the pipe) is a round hole. The groove is necessary to accommodate a knife made of hard alloy(e.g. tool steel).

The pipe should be welded to a solid steel angle, which in turn is connected to a solid base. When welding the angle and pipe, try not to close the groove. The knife will be fastened in it either with a hairpin or with a regular screw. Adjustment of the machine support is carried out without problems using washers.

3

Before starting production, you need to wipe the steel wire used as a raw material with machine oil (you can take the used composition). Some home craftsmen simplify this process too, using a special mechanism (they do it, of course, on their own). A similar mechanism is just a small box with an outlet and an inlet (their diameter should be slightly larger than the wire section). A lubricant is poured into it, through which the material passes before it enters the bending machine.

The sequence for making the mesh is as follows:

• the wire at its end is bent into a hook;
• pull the resulting workpiece through the groove and connect it with a knife in the pipe;
• begin to rotate the device (usually for this, a lever is installed on it, which simplifies the implementation of this operation) until the original workpiece takes the shape of a wave.

The undulating wire is then placed in lengths of the desired length and wound onto an inverted bucket. Please note that a meter of chain-link in the form of a wave is obtained from 1.45 meters of straight steel wire. Separate pieces of the mesh are joined to each other immediately before the process of stretching it. Lighter this the procedure will take place if you unscrew the outermost wire. Then you can apply the ends of the mesh to one another and fasten them with the removed wire.

The fastened mesh netting is allowed to be mounted directly on the fence under construction (to the posts made of reinforced concrete or other material that were previously dug in and securely fixed in the ground). It is recommended to put wooden slats on the posts. The chain-link is pulled and fastened to the rails with the help of nails. The process of stretching the mesh is simplified in cases where a stretching beam or coupling is used (they are hooked onto some kind of support - a wall, a tree, and then twisted with a strong rope).

Home craftsmen who have mastered the operation of making a chain-link mesh with their own hands and have erected more than one reliable fence are advised to paint the fence after installation. Moreover, they say that it is better to paint the mesh not with a roller, but with an ordinary brush. In this case, the quality of the application of the layer is higher - the paint easily penetrates into the weaves of the chain-link, and these places are very difficult to access.

4

The described technology of independent production of the chain-link is suitable in cases where it is planned to fence relatively large plots of land. But if you need to make very little mesh to build cages for domestic animals (geese, chickens, nutria, rabbits, and so on), you can make a mesh much easier.

Take a plate of great rigidity with a width identical to that which the chain-link cells should have, and with a thickness slightly greater than the thickness of the raw material. You wind this very raw material (steel wire) on a plate, heat it up, and then wait until the material cools in air (no need to try to speed up the cooling process by using one or another device for cooling).

After that, remove the wire from the plate. Moreover, you unbend each new turn in relation to the previous one at a ninety-degree angle. The wire snake, which is obtained at the same time, is screwed into another of the same snake (you just need to connect the links of the two blanks together). The finished structure of the required geometric dimensions is obtained by stringing several blanks on top of each other.

For the production of mesh in small volumes(according to the second method that we have described), it is desirable to use a relatively soft wire. It is easier to wind it on a plate, heat it up, and then remove it. But even if you did not find one in your household, feel free to use any steel material. In cases where a hard or very springy wire is used, after removing it from the plate, its turns can be noticeably bent. This is not a problem. Take a hammer and lightly tap into the desired shape.

As you can see, it is not difficult to make a mesh netting yourself. Spend a little of your time, be smart, and save money that was planned to be spent on purchasing material for the fence!

It is best for a budding businessman to work in an area where there are large sales markets - even if you do not have enough experience to search good client, buyers will still be and profit, respectively, too. Produce Consumables for construction business has always been a profitable occupation, because the clientele will be constant, and the product itself cannot deteriorate. Even if the goods become more expensive, they will still buy them - a construction site does not work without a grid. The main thing is to produce high-quality products, because if a client once does not like your product, then next time he will simply buy it from a competitor. We will try to help you set up your production in such a way that it only brings money, pleasure from work and joy of customers. If at first glance, opening a business for the production of a chain-link mesh seems to you a difficult task, then just read the article to the end and you will understand that everything is not as scary as it might seem.

In this business, and in any other, the main thing is to work and constantly develop, to go forward. By constantly attracting several clients a week, it may seem to you that the profit is not growing much, but after a year of work you will notice the difference and, believe me, you will like it. Of course, if everyone could take some money from the bank and become a billionaire in this business in a month, then everyone would do just that. But not everyone succeeds in correctly distributing funds, arranging the supply of goods and advertising campaign, causing small business owners to go bankrupt. We will try to prevent this from happening.

How to open the production of a chain-link mesh: renting a room

Mesh production is a rather complex process that takes place on several machines and installations, so it will not work to put all the equipment in a small room. We need a spacious room of 60 square meters with good wiring, because the equipment draws a lot of electricity, if the wiring fails, everything will burn out. In principle, there are no more requirements for the premises, because we do not produce food or something like that. All that needs to be done is to pass the fire inspection, she will then allow us to work indoors.

We are very lucky in the sense that our position will not be reflected in any way in product sales. We will look for all customers ourselves, using the Internet and direct advertising, the net is not sold a couple of meters, it is sold in hundreds, so you still have to pay for delivery - even from the center of Moscow, even from more remote areas. The fact that we do not need to rent premises in the center, but can take it anywhere, will save a considerable amount of money on the operation of the enterprise. To begin with, in the center a room with such a square footage costs 150-180 thousand rubles, on the outskirts - 15 thousand rubles a month. Small business this will do just fine.

Wiring has a very important role, we do not connect a kettle with a printer to the outlet, but heavy and powerful equipment with a huge consumption of electricity. It is better not to risk it, all the same, premises of such an area can only be found in old warehouse or factory premises, where everything has long ceased to work. We advise you not to stint and repair all the wiring in order to exclude fires. The repair price will be 8 thousand rubles.

The production of the mesh takes place in several stages, but the main one is weaving the mesh on special apparatus... We will consider all the requirements for the equipment, so that you understand what you are paying for and what is generally needed for successful production.

First, the wire used to make the mesh must be sanded. Grinding a flat wire is many times easier than carrying out the same process with an already woven mesh. A wire grinder costs 70 thousand rubles, which is not very much, given the duration of its work in the future and the amount of products that it will process. The machine will pay off, in other words.

After the machine has sanded the wire, it must be cut into several equal parts and loaded into the special connectors of the machine for the wire bundle. When buying this car, you might get a little intimidated when you see the price. Foreign cars cost from two million rubles, they have many settings and capabilities. For a start, we advise you to buy a simpler domestic machine - it will cost you 215 thousand rubles, it will do the same amount of work as a foreign machine, but it will not have such a pleasant appearance and settings. It seems to us that this is the ideal option for a new business, since spending a lot of money on buying expensive equipment is stupid - it may not pay off

The wire is bundled into sheets with a width of about 3 meters, while customers usually order a sheet width that is half that. In order to satisfy the client, we need to buy equipment for cutting the mesh, as well as a simple machine that will wrap the wire into a compact form for transportation and sale. A grinder will cost us 8 thousand rubles, a machine 4 thousand.

A separate person will perform work on our machines, that is, you need to have only one worker. The work is not very difficult, you just set the workpieces in the right place, turn on the machine, get a polished product, which you then install into the machine using a net bundle, the resulting net is gradually rolled into a roll on the machine. Considering that the mesh does not deteriorate, you can fold it into compartments or leave it in some corner of the room, from where the goods will then be taken by customers.

The salary in this area is 12-15 thousand rubles, we will take the minimum bar. New venture with high start-up costs and no regular customers can not pull the huge salaries of staff, but you can promise an increase in the future. In times of crisis, even good professionals will agree to such a salary. Our employee wage a month will be 12 thousand rubles.

It is worth noting that with the expansion of your business, that is, the purchase of more machines, it is not necessary to hire more personnel. According to the professionals, one worker can easily handle the work of two blanks and two mesh weaving machines. The process, after all, is gradual - first the worker receives the polished wire, then he installs it into the machine along the weaving, and so on in a circle.

We advertise our business correctly: a few secrets

The main reason for the low advertising costs is that we will not spend money on distributing flyers - we will not sell the item by the piece. We need to find a large hardware store or a hypermarket where such products are most often bought and offer them to sell your product. The advantage of the store is that we will sell them our goods for one price, and they will set a different one, getting profit from the difference. In big cities, it will not be problematic to negotiate with a sufficient number of stores and construction hypermarkets. Someone will refuse, and someone will agree.

Construction companies will be the second market for their goods. The mesh is constantly used at the construction site, it is needed in large volumes and constant supplies. Just a couple construction companies will be able to provide us with the sale of all products that are produced in a month of work.

Business plan for the production of mesh netting: costs and income

Our start-up costs for the most part consist of equipment costs - 70 thousand for a wire grinder, 215 thousand rubles for the purchase of a machine for bundling wire into a mesh, 8 thousand for a grinder and 4 thousand for a machine for reeling products. Here we will add the purchase of boxes for storing products - 5 thousand, and the repair of the premises for 8 thousand rubles. In general, the costs will amount to 310 thousand rubles. Operating expenses amount to 34 thousand rubles.

Our machine produces approximately 90-120 meters of finished mesh per day with a width of 3 meters. The cost of one square meter of the grid is 80 rubles, that is, if we sell all our goods, the net profit will be 600 thousand rubles per month. Of course, at the initial stage, it will not work to sell all the goods at once - focus on half of this money.