Not a computer version of a ham radio's hardware log. Hardware logs. Log interface translation files

The hardware log for the radio amateur is the second most important document, after the permission to operate the radio station. In the last century, the hardware journal was often kept in paper form, since computers were not yet as widespread as they are today. The choice of a log is a personal matter, and as they say, there is no dispute about tastes. I will tell you what I use and what the capabilities of my electronic hardware logs are.

Electronic hardware log is very simple, clear and reliable, in one word it should be the best assistant for the radio amateur. He must prompt: and repetitiveQSO, and suggest the country and the approximate distance by callsign, show whether they were sent or receivedQSL(including e- QSL). It is desirable that there is a map in the log that shows where the radio amateur is from. It is very important that external programs can be connected to the log (as a rule, these are digital communications programs). It is desirable that the transceiver can be controlled directly from the log. And of course the log should be updated: load the database for new territories, callsigns, diplomas. And the last hardware log should be free.

Giving advice on choosing a hardware log is a thankless job. I will just tell you what logs I use myself and tell you about their pros and cons. Let's start with the fact that choosing a log is a very crucial step, and as a rule, having already chosen one type of hardware log, it is already difficult to switch to others. At one time I used different ones, and in that case the choice stopped on three:MIX, HRD, UR 5 EFQ.

Let's start with MIX ... With a bunch of disadvantages (interface at theWIN95), there are a couple of merits. The most important thing: this is combat readiness in just a couple of seconds. That is, I clicked on the icon and the program is immediately ready for work (in contrast toUR 5 EFQwhich needs to download a ton of data and also check for updates - which can take a couple of minutes). The second plus is work in the modeSSTV... And another plus - the mix can decode CW signals. Perhaps that's all ...

UR 5 EFQ - probably one of the most famous logs. Lots of amenities, great design, intuitive interfaces and, in general, a lot of pluses. The main thing is the windowDXcluster, and if you configure the transceiverCATthe system can be switched with one click of the mouse. Digital modes of communication also work fine (it's just a pity that there are not very many of them here). If the Internet is available, the log can help "break through" any callsign (on the serviceQRZ), send a spot toDXcluster and finally sendeQSL... Another very important advantage: you can connect external programs (ROS, MIX, DigitalMaster..) which makes it possible to automatically transfer information (callsign, name,QTH, report, etc.) from the window of the connected program directly to the log. There is only one drawback: when you start the program, it will not be ready for work immediately, but after a couple of minutes (especially if you update all the databases, it will take even longer). But on the other hand, there are a lot of advantages ...

HAM Radio Delux consists of several separate programs linked by an IP server. Thanks to this, each program can be launched on a separate computer connected to other local networks. The program is not intended for localization, so there is no official Russian-language version. There are versions russified by enthusiasts. Translations of instructions are of greater interest. The appearance of the programs can change depending on the "skins" used, the wide customization options allow you to create a screen at will, so that the necessary information is in front of your eyes.

Rig control

The program for controlling a transceiver or radio receiver allows you to practically fully implement the functions of the controlled device. The program allows you to organize remote control device via TCP / IP interface (via local area network or the Internet).

Logbook

Automatic hardware log for both bidirectional QSOs and SWLs, as well as competition logs. The program also allows you to connect via the Internet DX cluster and callsign identifier, track diplomas (links with LOTW, eQSL and Ham Radio Deluxelog.net) and competitions. The database is compatible with Microsoft Access and MySQL for backup and recovery.allows to automatically upload logs to electronic QSL systems E-QSL.cc and LOTW.In addition, the program works in conjunction with Google Earth. If you highlight the log entries and then click on the Logbook -> Lookup -> Google Earth icon, the locations of the correspondents (if a locator is available) and the track lines connecting them to your station will be displayed on the Google Earth map.

Digital Master (DM-780)

The DM-780 works with most computer sound cards, supports virtually all digital amateur radio modes, and communicates with the Ham Radio Deluxe Logbook. AtHovering the cursor over the callsign of the correspondent shows his country and the presence of previous contacts with him. The main advantage of this program is the presence of a very large selection of modulations (there are much more thanUR 5 EFQ), and it was also noticed that with a weak signal (even when it is not visible on the waterfall, it is approximately a level of -20 dB), the program decodes the received signals without error.

A must-have for every amateur radio station is hardware log... It records all its broadcasts: the transmission of a general call, radio communications, setting up the transmitter (transmitting path of the transceiver) with a connected antenna.

Hardware log- the second most important document on an amateur radio station (after permission to operate it). In accordance with the requirements of the instructions on the procedure for obtaining permission to build (purchase) an amateur transceiver radio station and the operating rules for each broadcast, a certain minimum of data must be entered into the hardware log.

It includes: the date and time of the communication (going on the air), the range or operating frequency, the call sign of the correspondent (an indication of the transfer of a general call or setting up equipment with a connected antenna), an assessment of the correspondent's audibility, summary the adopted text. From the received text, only atypical information is usually recorded, that is, RST or RS, QTH of the correspondent, his name, data about equipment, weather, etc.

V hardware log the transmitted text should also be included if its content is outside the scope of ordinary amateur communication, a typical exchange of information between shortwave. Recently, with the development computer technology more and more computer hardware logs were used. An example of such a log is shown in the figure below.

The form of the hardware log is quite arbitrary. In addition to the above mandatory data, various Additional information, facilitating the accounting of connections, "hunting" for diplomas, etc. This can be, for example, serial numbering of radio communications, marks of receipt and departure QSL cards, notes about the azimuth of a directional antenna, about experiments with antennas and much more that is of interest to the radio amateur himself.

The form hardware log the same for both individual and collective radio stations. In the log of a collective radio station, in addition to communication data, the operator makes at the beginning and end of his work the corresponding entries on the acceptance and delivery of duty at the radio station.

Many collective radio stations currently have several workplaces, work from which is carried out alternately (that is, two or more operators are on duty at the same time). In this case, it is advisable to enter an additional column in the hardware log, in which each connection is indicated (for example, by an individual or SWL call sign) of the operator who established this connection.

The observer's hardware log contains the same columns and data, but an additional column is usually entered in it, in which they indicate the callsign with whom the logged radio station worked (or indicate CQ if it transmitted a general call).

Hardware log- this is a working document, and it should be filled out directly in the process of working on the air. Sometimes, for example, in competitions it is more convenient to keep records not in the logbook, but on separate sheets of paper or forms. In this case, only a record of participation in the competition is made in the logbook (the start and end times of the work, the total number of radio contacts and the points scored) are indicated.

After drawing up the report, the drafts on which the records were kept during the competition are folded into a separate envelope and stored together with the hardware log.

When conducting hardware log It is best to use universal time, since the basic documentation of amateur radio stations (receipts, reports of participation in international competitions, etc.) requires exactly universal time (UTC)... Moscow time (MSK) is indicated only when drawing up reports on participation in all-Union or intra-union competitions. In this case, it is convenient if the radio amateur writes communications not to a draft, but directly to the hardware log, indicate the MSK time in it, making (in order to avoid errors when drawing up the report) a corresponding note in the fields of the log.

The date of the connection in the hardware log also, of course, must be stamped according to universal time.

Description:

Description: In the new version 8.1, bugs are fixed and an extended statistics mode for the QSOs has been added. Added a separate statistics window for more visual information. ATTENTION!! ! Before using the new version, you must uninstall the old version of the program. Hardware log of radio amateurs IHR 8.0 The program is completely free, use without any restrictions. There is no need to install the program, unpack the archive and run the RadioJurnal. The goal when creating this program was set - accessibility and ease of use. The program is designed for both an advanced user and a user who does not professionally own a computer and conducts communication mainly by telephone and telegraph. The program has all the basic features necessary for keeping a log of the conducted QSOs. There is an opportunity to work for diplomas, create a description of diplomas, conditions of performance, etc. (scoring and data entry are automated). There are databases on Names, QTH, RDA regions, all of them are updated with your data and saved for further work. Data entry, auto-completion of fields and display of information on the last QSO made is as easy as possible due to the ability to use the on-screen keyboard when working, which greatly simplifies data entry without being distracted by work using a regular keyboard, just manipulate with one hand with the mouse. It is possible to edit data directly in the log. The editing process is similar to working in common text editors, which makes it easier to work in editing mode. It is possible to display repetitions when the callsigns match (it can be done automatically), there is a mode for fetching data on the page for any given parameter. You can customize the color scheme of the magazine for "yourself" - it allows you to choose the colors with which you are pleased to work. Help (F1) and tooltips will help you quickly learn how and what to do. Saving pages of the journal and additions is carried out directly to a file with its own extensions, in text format, and export / import in Excel format is possible. It is possible to send messages by e-mail files directly from the program (using the program installed in the system by default). Added the ability to work with the "magnifying glass" mode for people with poor eyesight. Please send all your suggestions by Email specified in the program (see "About the program!"). V latest version the program added the ability, with a constant Internet connection, to view data about the correspondent from the site database and a built-in minibrowser, some server functions appeared to facilitate work, the Earth / Moon / Sun position on an additional map in real time was added, a database duplication function appeared in case of a system failure, but in general the program remained simple and accessible.

Fixed minibrowser script errors when executing queries

To update the program, you must: In the IHR folder on the disk (C: IHR), delete the Nastroiki.ihrN file, then unpack the archive to a convenient location and run the RadioJurnal file from this folder. 73! See you at Banda "x.

Enter DEMO-magazine

The site is completely free, but its content requires money.
If you liked it, click on the "HELP THE PROJECT" button and transfer any amount for the development of the site.

HELP THE PROJECT
Setting up mailing for unregistered users. You can enable or disable the receipt of QSL cards and messages from this site. Tune...
QSL mailing settings window

If you are not registered and want to customize your QSL mailing list... Just enter your callsign and email address in the appropriate fields and click the "configure" button. The system will send you email with two links. One link allows sending you QSL-ok, the second - prohibits. Treat this procedure with understanding because this way of setting 100% will protect you from unwanted changes to your settings by others.

Enter any amount, choose a more convenient payment method (Yandex-money, VISA / MasterCard or cellular telephone) and click on the "Pay" button. The money will go towards the development of the project.

About the site as a whole.

The main idea behind the creation of this RV6AMZ magazine was simplicity and the ability to work in it from anywhere in the world , and from any operating system without any installations and additional programs. Second - in Russia and countries the former USSR(and not only in these countries) there are many Russian-speaking radio amateurs who do not know English language... For this reason, "communication" with such servers as eQSL, LoTW becomes almost impossible for them, and these servers are mainly focused on DXCC. There are many interesting diplomas not implemented in programs and I would like to make a system that could interest the organizers and attract radio amateurs of this category.

And finally, isn't it a shame to the Russian radio amateurs that there have not been such systems in Russia before? There are many programmers in our country who are capable of creating such systems.

The result is a three-in-one system:
electronic hardware log;

electronic QSL-bureau;

diploma program.

Possibilities:

The magazine works in any browser - Internet Explorer, Opera, Google Chrome, Mozilla Firefox etc.;

When you enter the next QSO, the date and time are automatically entered depending on the time zone;

You can select the time zone ( local time or UTC) or manually enter the date and time;

Permanent display of the last 15 communication sessions, this number can be changed if desired;

It is possible to add a comment and conveniently view these comments when viewing a QSO;

Search for QSOs by date and time, callsign or other condition;

Automatic saving of QSO in the database immediately after its input;

The function of displaying data about the radio amateurs "on the fly" has been added. without waiting for the "Enter" button to be pressed;

There is a button to show all QSOs made with the given callsign;

All records are stored on the server and there is a possibility of its additional backup on any medium;

When using the magazine on the site - access to the magazine is carried out without any installation of additional software, you only need access to the Internet.

Added the ability to maintain a separate journal for contests.

It is possible to edit or delete entries in the journal.

Added the ability to view the entire log and output it to a printer.

Added the function of sending QSL cards via email.

Saving a backup copy of the log log on your computer.

Export / import of a log in * .adif format

Export of the Contest log to Cabrillo format.

V personal account added selection of a background image for a QSL card.

New - It is possible to add the club logo to the QSL card.

New - Members of the KDR club (club of certified radio amateurs) and CPP (union of radio amateurs of Russia) are noted in the magazine.

New - Checking the completion of diploma projects (menu item "Diplomas").

New - Added CHAT on the "Journal" page.

New - The journal learned to memorize the range and the number of the last QSOs for viewing.

New - Now you can upload your own picture for a QSL card.

QSL cards can be sent without prior request only to correspondents registered on this site. Unregistered radio amateurs are first sent a request for permission to send them QSL-oks and sending for them will start only after confirmation is received. After sending, a report is generated, which can be viewed on the site or downloaded if desired.

If you have any questions, you will find errors and mistakes - write to the address: [email protected] or in the "Reviews" section.

Many radio amateurs are familiar with the AALog 2.47 hardware log program. At one time, thanks to this logger, hundreds of shortwave people were able to automate the QSO recording of their radio station and track statistics on popular radio amateur diplomas, print stickers with data on radio communications, and much, much more. But life makes new demands on loggers. Worldwide electronic databases have appeared, such as QRZ, RAC, Bookmaster, RIC, Golist, LoTW, eQSL and others. With the proliferation of clusters, work on the air has become more intense, radio amateurs are experimenting with new types of communication, and the modern hardware journal of an amateur radio station must take into account all these innovations.

Many have been waiting for updates of the AALog 2.47 program for a long time. But the author did not consider it possible to lay out a "raw" product for general use, so for a long time a group of radio amateurs conducted intensive testing of a new version of the program for the correctness of its operation and improvement of user qualities, allowing each opera
toru configure the logger to suit your taste and preferences.

AALog 3.0 is an amateur radio station's hardware magazine designed for daily work on the air. Modern approach to programming made it possible to create a convenient, powerful and versatile tool that can satisfy the requirements of the most demanding user. V this review we will introduce you to the basic functions of the logger and give a brief information about its interface. I note that the development of the program and its further improvement are well helped by discussions on radio amateur forums, in which the author himself takes part. The help file is currently under preparation, so when it appears, the user will be able to independently study the main features of the program. Fortunately, there is nothing super complicated in it.

Let's go directly to the acquaintance with the AALog 3.0 program. As in other RZ4AG programs, this logger has the ability to flexibly customize the interface for a specific user. At the same time, the user is not placed in the rigid frames laid down by the programmer, but is free to sort the log fields depending on their tastes and priorities, arrange the windows that are necessary in this particular situation on the screen, set them the optimal size, depending on the monitor diagonal. The program will remember these settings and the next time you start it you will not have to reconfigure the program "for yourself".

The logger allows you to enter all radio communications in one log, or divide them into many logs, grouped into one Log set (a group of logs of one user). For example, you can separately have a log for a contest, for working with alternative QTH, for using special or shortened contest callsigns. At the same time, the number of logs and Log set is limited only by the needs of the user. This means that this logger allows you to have a common hardware log, dividing it into different Log sets, for family radio stations, a combination of individual and collective radio stations, various operators of one collective radio station, logging for special call signs, and the like. Each Log set maintains its own statistics, both for individual logs included in the Log set, and general statistics for the entire Log set. In the Summary statistics window, you will see the total number of contacts, the number of different callsigns, sent and received QSLs, both by type of connection and by continent. You can see more detailed statistics for almost 120 diplomas in the Awards manager window. The user has access to the functions of creating and editing individual logs, Log set, a list of supported diplomas (easily replenished by the user), Band plan and Modes list. It is possible to configure various options, such as the frequency display format, a set of function keys, font colors and size, a large selection of background colors, etc. The logger allows you to use both an internal callbook, compiled according to the connections entered in the log, and an external one based on seven bases - QRZ, RAC, Bookmaster, RIC, Golist, WinQsL, QSL routes, LoTW, eQSL (both from CD or HDD, and directly from the Internet during QSO), a large number of external programs working in conjunction with the logger - CWtype , TrueTTY, OmniRig, DXAtlas, Band Master and others, which can be added by the logger user. It is possible to edit both an individual QSO and a group of links for all fields of the logger. The data autocomplete function is very convenient. Fill missed QSO data fields - allows you to fill in all contact fields (name, city, RDA region, WW GRID, QSL via, etc.), for example, for contacts converted from contest Loggers. The flexible printing system allows you to print the link data both on labels and directly to QSL. A special program attached to the log allows you to edit existing templates and create your own templates for printing. The special beauty of the logger is that there is no need to install it. This means that by writing down the Logger on a USB flash drive, you can open it on any other computer, while retaining not only your connections, but also your favorite settings.

It is possible to display the information you need in this window. All fields that will be displayed are selected in the corresponding menu of the program. The quick launch buttons allow you to quickly open windows for entering a new QSO, editing communication data, a search menu for the desired QSO (which allows you to search by user-defined criteria, such as - callsign, QSL via, IOTA, state, province, zone, notes), filter setting window (flexible filter setting allows you to select
necessary links, both in a specific log and in a set of logs LOG SET), you can delete the selected link with a separate button. Also in the quick launch panel there are buttons to open the DX cluster window, the Band Master and DX Atlas programs. The last button is for displaying the hardware log settings window. Naturally, all these windows and programs are available by choosing in the classic program menu, the items of which are located at the very top of the main window. The logger allows sorting the columns - Callsign, Date, Time, Freq, Mode, Name, QTH, QSL via. For example, in order to view all the connections with Ivans, you need to left-click on the name of the Name column and the open log will be sorted by the names of the correspondents.

The window for entering contacts (the “New QSO” window) has three display options that can be quickly switched to the view that is needed at a particular time, depending on the amount of information during the QSO. All necessary data about the correspondent, such as country and specific region of the country (if any), bearing and distance, WAZ and ITU zones, name and city, RDA and IOTA numbers, WW Grid and QSL info are displayed in this window. In the Custom awards ref tab. data on diplomas such as RRA, RFF, RIIA, RCA, IOCA, DIE, etc. are entered. Unlike the old version of the program, there are advanced capabilities for working with QSL. Starting from different ways sending and receiving cards, which is displayed in the program with the corresponding icons, ending with the ability to work with LoTW and eQSL systems. The logger allows you to enter communications not only in real time, but also in Write Log mode (from a paper log or using received QSLs). In the QSLing tab, you can mark not only the receipt or sending of QSL, but also the quality of the QSL received from this correspondent. To the right of the callsign, you can activate up to nine shortcut buttons, which will allow you to manually redefine the country, find data about the correspondent on the Internet, go to Write Log mode, save the data in the internal flask (without making a connection, for example, if someone could not be reached ), send a spot to the DX cluster, launch the required program, switch to the Write Log mode and mark in it the receipt or sending of QSL, etc. (there are 22 menu items in total). The NEW QSO window can be opened in conjunction with the windows of previous contacts with this station and the diploma statistics window for this callsign.

I would especially like to dwell on the new possibilities of the statistics window for diplomas. In the third version of the logger, it became possible to call for editing, or just for information, data, both by country and by range. It is very convenient. It is possible to display statistics in the form - worked / confirmed (wkd / cfm) or in digital form triggered / sent by QSL / confirmed - 347/216/202. The logger allows you to see what your achievements are in confirming both traditional paper QSLs and using credit in LOTW and (or) eQSL. A huge list of diplomas for which statistics can be displayed can be easily supplemented by the user himself, while there is a function to disable a number of diplomas that are not interesting to the user. And, for example, for the DXCC diploma, you can see your statistics, both for existing countries and for those that have ceased to exist.

The cluster function is very convenient and informative, the window of which is shown in the figures on the right. Special icons indicate what a particular spot gives during a QSO (using the journal's statistics on the list of "DXCC" diplomas). You can use both the internal database of clusters by choosing the one you need, or enter the data yourself. Cluster commands can be entered manually or used for the most frequently used special buttons, which the user can also customize for himself. When using the CAT system, just click on the spot line and your transceiver will switch to the desired frequency, and the callsign will be entered in the NEW QSO window.

The logger implements the ability to work with databases of QSL managers. There is a function to import link data from the most popular formats ADIF, Cabrillo and from the AATest contest logger program. It is possible to export data, implemented in the form of a convenient window, intuitive to the user, and allowing you to save the data in the desired form.
It is impossible to give a full description of the program within the framework of a journal article. When you start using AALog 3.0, you will find many useful functions and nice little things in it that make it easy to store and record QSOs. Naturally, everyone chooses a hardware log program for himself, but by choosing AALog 3.0, you will get a powerful tool for everyday work on the air, with high-quality service and great opportunities. Software which will give real pleasure to the operator of the amateur radio station.

This logger and other programs mentioned in the article are posted on the site.

Andrey Korpachev