Painting a natural fur coat at home. How to dye arctic fox fur at home in different colors - the nuances of technology. How to dye faux fur

Happy owners of fur items know that they fade over time. You don't have to seek professional help to get the color back - you can do it at home. Knowing how to dye fur, you will give the product a second life with minimal costs.

Preparation

Before proceeding directly to painting, the fur must be prepared. Thoroughly clean it from dust and dirt so that the paint lies well. For this purpose, you can use an alkaline solution.

For a liter of water, you need to take the following components:

Stir all the ingredients to make a smooth paste. It is convenient to apply it with a brush. Be sure to rinse off the product. You can use another composition: combine water, vinegar, alcohol in equal proportions.

The seamy side, the flesh, also needs to be processed. It is necessary to apply glycerin or fat cream on it.

This will prevent deformation of the skin. The fur must be attached with pins on a plank so that the thing does not lose its shape during the dyeing and drying process.

If the flesh is poorly dyed, it will "shine", creating the effect of rare villi. It can be tinted from the inside out. How to dye the skin of the fur? You can use a special product or apply hair dye, having previously tested it on an inconspicuous area.

We use hair dye

It is often used to color the Arctic fox. It is quite dense, so it is better to buy two or three packs so that the color is saturated and uniform.

Before applying the composition to the entire surface, test it on a small piece.

You can see how it will "behave" when interacting with chemicals. Choose a paint one or two shades darker than the natural color - it will make its color richer.

If the thing has turned yellow, it is better not to paint it, but to lighten it. This can be done with hydrogen peroxide. Only after that it is necessary to apply the coloring composition of the appropriate shade.

How to apply the paint?

Spray paint

Owners of things made of arctic fox fur sometimes notice that the tips begin to turn yellow. To return to its original appearance, it is not necessary to paint the entire product; it is enough to use suede paint from an aerosol can.

Can mink products be dyed?

Natural fur is always in fashion. But over time, stylish mink clothes lose their rich color and shine. How to dye fur at home? This is not difficult if you follow the basic rules.

Often women dye their mink with regular hair dye. Before applying the composition, the mink fur must be prepared in the same way as the fox fur. To facilitate the procedure, you can use an aerosol or spray bottle. Spray the product at a distance of about 70 cm. Remember to comb the hairs with a brush or at least rub them with your hands. For drying, you can use a hair dryer or let it dry naturally. The hair balm applied to the surface will give shine and softness. Be sure to wash it off thoroughly.

Painting faux fur

Products made from it are very popular due to their attractive appearance and an acceptable cost. But over time, faux fur needs to be dyed.

1. If you want to drastically change the color of the product, choose a hair dye with a high degree of resistance. To freshen up the shade, use a toning shampoo.
2. Pre-clean the product from dust and dirt with a swab dipped in shampoo. Apply the color composition to a small area to evaluate the result.
3. In order for the entire surface to be well painted over, the product must be well tensioned and fixed. Brush in the direction of the grain, grasping the fabric as well. Withstand the dyeing time indicated in the instructions, and rinse the fur thoroughly. Use a brush to comb out wet lint and let the garment dry.

Knowing how to dye natural or faux fur will keep your clothes fresh and neat.

With time natural fur loses its visual appeal - it fades, fades, loses its shine or becomes stained. What to do if a fur coat, hat or coat with a fur collar, which can last for more than one year, has become unpresentable in appearance? There is a solution to this problem - they can be painted. This option is also acceptable if the thing is tired and you want to update it. The procedure can be entrusted to a professional or you can try to cope with the painting on your own. How to dye fur at home and where is it better to do it? Which dye to choose?

General rules for dyeing fur

To return the fur to its previous color, the paint is selected 1 shade darker than the existing one. Light-colored products are colored tone-on-tone. The dyeing process at home can lead to unexpected or unsatisfactory results, so you should only experiment with old furs. Trying to paint an expensive new product at home just to get a different color is not recommended.

Before the procedure, the selected composition should be tested in an inconspicuous place - this will help minimize the risk. If the shade turned out to be acceptable, the villi did not fall out and did not break, they begin to stain the entire product.

Where to paint and what is needed for this?

Depending on the size of the product, you can paint it by spreading it out on a table, floor, or hanging it on a hanger. Before the procedure, it is necessary to protect the work surfaces by covering them with cellophane. The painting is carried out by wearing old clothes or the one that you do not mind getting dirty, and protective gloves.

To carry out the procedure yourself at home you will need:

• dye;
• cleaning composition;
• brush or brush;
• comb;
• cellophane;
• glycerol;
• shampoo, hair balm;
• table vinegar.

The fur must be cleaned before dyeing, as the dye may lie unevenly if it is dirty. To do this, use shampoo for animals or prepare a cleaning composition yourself:

• dissolved in 2 liters of water, 2 tbsp. l. soda and salt with mild liquid soap or dishwashing liquid, adding a few drops of ammonia;
• mix water, vinegar and ethyl alcohol in a 1: 1: 1 ratio.

Before cleaning, the flesh must be treated with glycerin or fatty cream - under the influence of water, it can lose its shape and crack. The cleansing composition is applied to the entire fur surface, left for 10-15 minutes and washed off with clean water.

How and how can you dye or tint fur?

In order to dye the fur, you can use a variety of products. Hair dyes provide long-lasting deep color, besides, their assortment is so wide that you can find absolutely any shade.

With the help of special aerosols, you can quickly tint fur and mask flaws. For home tinting, even improvised means are used - brilliant green, blue, potassium permanganate.

Hair dyeing products

Hair dyes are great for fur because the villi are very similar to human hair. The mink is the closest in structure. You should not skimp on the composition: it must be gentle and persistent. When buying, you need to take into account that when dyeing long thick fur, especially in black or bright colors, you will need a lot of funds, perhaps more than one package will go away. The paint is diluted in accordance with the instructions for use, wearing protective gloves on the hands: the dye and the oxidizing agent are mixed in a shallow non-metallic container until a homogeneous mass is obtained.

The resulting composition is applied to the fur and distributed over the entire surface. If the volume of work is large, it is more convenient to use a brush. For small items, use a special paint brush. To evenly distribute the product along the entire length and not leave unpainted areas, use a comb. The composition is left for a certain time according to the manufacturer's instructions (for about half an hour), then washed off with water. If necessary, the fur is washed with shampoo, after which it is combed and dried.

Special dyes for fur and wool

Dyes for fur in the form of aerosols and sprays will help you quickly and easily update the look of your fur garment. With their help, they produce toning, and also mask small defects. Deep staining cannot be achieved in this way, because the dye is applied only to the surface. Sometimes this is enough, especially when it comes to furs with a long pile - silver fox or arctic fox, because it is usually the tips that fade and fade. It is convenient to spray shoes with dyeing spray. The collar of the coat and the fur on the hood of the jacket can be dyed without removing.

This form of release is also convenient for stencil work. Apply the dye from a distance of 40-60 cm by spraying. It does not need to be washed off. If it is necessary to obtain a deeper shade, several layers are successively sprayed. Work must be carried out in a well-ventilated place, protecting Airways respirator.

Improvised means

If the light fur has turned yellow over time, you can return it whiteness with the help of hydrogen peroxide diluted with water in a ratio of 1: 3. The product is applied, avoiding contact with the skin, and left for a quarter of an hour. Do not overexpose, otherwise the hairs will become brittle.

Fox products are updated by tinting with potassium permanganate. It is diluted in warm water, determining the desired saturation of the shade by eye, and the fur is treated with a sponge soaked in the resulting solution. Do not allow it to fall on the flesh.

You can remove yellowness with blue. A small amount of the product is diluted in warm water, the sponge is moistened and the fur is treated with light touches. However, in this case, after the first wet, yellowness will appear again.

You can paint the product black with basma. It is also suitable for freshening up the color and shine of dark astrakhan and nutria. With the help of henna, the fur is tinted in an orange tint, and a mixture of two natural dyes gives a brown tone. The powder, diluted to the thickness of sour cream, is evenly applied with a brush, covered with cellophane, rolled into a roll and left in a warm room for 1-3 hours. Then it is washed, dried and combed.

To maintain color, you can use a tinted hair shampoo. This method does not provide a lasting result, but it will do to postpone the time of the next painting of a faded product.

How to fix the paint?

Fix the paint with a vinegar solution. For 2 liters of water, take 5 tbsp. l. 9 percent vinegar. The product is poured into a spray bottle and sprayed over the entire surface of the product. If the procedure was carried out using hair dye, after rinsing the composition on the fur, you need to apply the supplied balm, leave for a few minutes to act and rinse. Then use the vinegar solution.

Drying rules for dyed fur

It is necessary to dry the dyed fur correctly - in natural conditions, away from heating appliances and sunlight. You cannot speed up the process using a hair dryer. Overdrying leads to deformation of the leather part and damage to the fur. To avoid losing its shape during drying, it is better to stretch the product on a horizontal surface and fix it.

Features of working with fur of different animals (polar fox, mink, rabbit, etc.) and artificial

When dyeing different furs, it is necessary to take into account a number of nuances. The easiest way to paint a white rabbit or chinchilla is that they do not have to be pre-lightened to obtain the desired color. Due to the high sensitivity of the rabbit pile to chemistry, the selected composition must be tested.

Mink products are difficult to dye; the procedure may have to be repeated several times. If, over time, the structure of the mink has changed and the hairs have become tough, most likely, after dyeing, it will finally lose its appearance. Arctic fox, which has a long, dense coat, requires a lot of dye. But arctic fox products are much easier to paint, and the result lasts longer. Discoloration of white or gray fox and marten is carried out very carefully and no more than 1 time - the hairs quickly become fragile and brittle.

When working with sheepskin (muton, tsigeyka), it must be borne in mind that this fur is very thick. It is necessary not to spare the paint and carefully monitor the uniformity of its application to the sheepskin. It is not recommended to dye the muskrat at all - the result is impossible to predict, usually the dye lays down unevenly, besides, the dyed fur quickly sheds. Beaver should be painted only in a darker shade; after treatment with a clarifier, it will turn yellow.

Faux fur is dyed with hair and fur dyes. To obtain blue, blue, green, yellow shades, improvised means are used - blue, brilliant green, iodine, potassium permanganate. Dyeing is also carried out using dyes for fabrics, taking into account the type of material - acrylic and aniline paints are used for wool, silk and cotton, and dispersion and cationic paints for synthetics.

How to care for a painted product?

Modern dyes are durable - they are resistant to moisture, light, mechanical stress, so special care of a dyed fur product is usually not required. To keep the color and shine for a long time, balms are periodically used to care for colored hair. Fur dyed by spraying requires more attention. Such compositions are less stable. Under the influence of unfavorable conditions, the color will disappear quickly, so it is better to protect the fur from water and high temperatures.

Fur products, including dyed ones, must be periodically cleaned (on their own or by dry cleaning), combed, protected from direct sunlight, stored in a dark place in a breathable cover. After a walk in snowy weather, upon returning home, fur coats, collars and hats must be completely dried.

It happens that with the onset of cold weather you take your favorite white down jacket out of the closet and see that you should no longer wear it ... The down jacket itself is intact, but the white polar fox collar has acquired an unpleasant yellow tint... With a sigh, you take off the collar and decide that over time you will have to buy a new thing, but for now you will wear it without the addition that was excellent in the past - the fox trim. But do not rush to throw the collar into the trash bin or cut into fur rags. The situation can be easily remedied.

At home, the fur collar can be dyed using ordinary hair dye. And this procedure will not require much effort from you.
In this article, we provide step by step instructions for dyeing fur.

1. In order for the coloring matter to freely penetrate into the structure of the fur, it is necessary before painting degrease and clean from dirt.
For this it is necessary to prepare a special solution. We take:
- table salt - 3 tsp;
- ammonia - 1 tsp;
- any liquid detergent or shampoo for an animal - 1 teaspoon;
- baking soda - 2 tsp;
- water - 1 liter.
We process the fur with a solution with a brush. Then it should be thoroughly rinsed and dried.

2. It is advisable to protect the flesh, the lint-free side of the collar from drying out before painting. To do this, it is lubricated with glycerin or any nourishing cream. Otherwise, your collar is more likely to break.

3. Best option – dye the fur a tone darker than he was before. But if your paint contains bleaching agents, then you can achieve the original color. Since the fur of a polar fox is much thicker than the hair on a human head, we recommend stocking up on more than one tube of paint.

4. Now you can start to dyeing the collar... We use the paint according to the instructions. In order for the coloring matter to be evenly distributed, it is better to pre-moisten the fur with water. Work with gloves, apply the paint quickly, distribute it with your hands over the fur - the main hair and underpads should be thoroughly smeared.

5. At the end of the dyeing time, rinse the fur abundantly with water. After that, rinse the collar in a vinegar solution. You can use a hair conditioner instead of vinegar to rinse and add shine and volume to the fur.

6. When our collar is rinsed, dry it gently with a towel.

7. In order that the collar does not sit down after staining, it must be dried on a flat surface, well straightened, stretched and pinned to the surface with needles. The collar should be dried with the fur facing up. The flesh will dry the longest, so make sure the flesh side of the collar is dry before removing the retaining needles.

How to clean silver at home
Many women prefer silver jewelry because this meta ...

How to clean gold at home with improvised means
Everyone loves gold jewelry, and women are just crazy about them. And u ...

How to clean suede at home
Suede is a very demanding material, so it needs to be ...

How to clean carpet at home with folk remedies
In our world of new technologies, we are already accustomed to all kinds of services ...

Light in the house - we create comfort with lighting
Do we always know the reason for our bad mood or tiredness? By...

Fur products have always been distinguished by their invulnerability to the effects of high temperature drops and other environmental factors, but sooner or later the fur on them can fade, lose its former shine, become stained or simply fade. However, the loss of color in a fur coat is not a sentence at all, and you can restore its previous brightness without contacting specialists. And today we will look at how to dye natural fur (using the example of mink and arctic fox) and artificial in the most effective ways.

We paint products from arctic fox fur

If it is very dirty or discolored, it is necessary to treat its surface with some kind of alkaline solution. Coloring elements do not penetrate well into the structure of oily or dirty hair. Therefore, to achieve a flawless result, you need to make an appropriate solution. The cleaning agent is prepared as follows:

1. For 1 liter of water, add 2 teaspoons of salt.
2. 1 teaspoon of ammonia and the same amount of detergent.
3. 2 teaspoons of baking soda

The resulting substance should be applied to the fur with a brush. Such a product is dried naturally.

When processing the inside of a fur coat, it should be pre-treated with glycerin or fatty cream. This is done in order to prevent it from drying out.

Which color should you choose?

The answer to this question is ambiguous. In any case, the final choice is only yours. However, experts recommend dyeing the arctic fox in dark colors. If you want to dye your fur coat in a lighter shade, pre-treat it with hydrogen peroxide.

Before dyeing the fur at home, you need to thoroughly moisten the fur coat in water. Regular hair dye is applied to the surface of the fur. You should not hesitate with the application of this substance. Do not forget about safety measures - use rubber medical gloves when working. They can be purchased at almost any pharmacy individually or in packs of 100. When applying paint to the fur, smooth the fur coat with your hand - this way the substance will spread more evenly over the surface. After that, it is necessary to withstand the product for several minutes (as indicated on the instructions with the paint). Next, rinse the fur in warm water. It is best to add vinegar there. Now you can proceed to drying. To prevent fur from “shrinking” in the future, gently stretch it. Pin it with pins if necessary.

How to dye mink fur?

Mink fur is very close in structure and appearance to human hair, so it should only be dyed with an aerosol or spray bottle at a distance of at least 50 and no more than 80 centimeters from the surface. In order for the paint to be well absorbed into the material, you need to comb it thoroughly after each application of a new layer. With the help of a comb, the paint is more evenly distributed over the surface of the fur coat and other fur products, as a result of which they will look fresh and attractive. As we noted earlier, mink is very similar in structure to human hair. Because of this, it is necessary to select a paint for her that would not harm her qualities. It is best to use a material that has been tested on your curls, that is, regular hair dye. This is sold in almost every supermarket and market. The assortment and variety of colors will satisfy even the most capricious fashionista, so choose the appropriate option, and then boldly apply paint to your fur coat.

Drying

As for drying, such reconstituted products can be processed with an ordinary household hairdryer. In this case, the fur should be periodically combed so that it does not fall off in the future. Use a hair balm to add shine to your fur coat. It will soften the fur well and make its color more saturated.

How to dye faux fur?

First of all, you need to decide in what color you will dye this fur. Although, in general, the principle of work does not differ from whether you repaint a fur coat cardinally or process its surface only partially. The only difference is in time.

How to dye faux fur? As with natural, hair dye is the best remedy. If you want to make the color of your fur coat dark or light (that is, one that is very different in shade from the true one), use persistent options. If you are going to process the fur only partially, a regular toning shampoo is quite suitable for such purposes.

So you've bought the paint you want. What to do next? Before dyeing the fur at home, you need to thoroughly degrease the surface of the fur coat and remove all dirt from it. To do this, use a cotton swab previously moistened with detergent or shampoo. And one more thing - before staining, it is better to check the color of the paint on a piece of paper in advance. Sometimes it happens that the bottle does not match the specified shade. Or you just don't like it. Then you will have the opportunity to change it, and in the meantime the fur coat will not suffer from double "torture".

How to dye fur at home? When applying the material to the fibers, make sure that the fur is evenly placed on the surface. To avoid unpainted areas, use a comb (same as with natural products). The material itself is applied with a brush in the direction of the fibers. Thus, the paint will capture not only the upper part of the fur coat, but also its fabric base.

Wait a few minutes for all the pigment to be absorbed. Exact time each paint is different, so always follow the application instructions. After the paint is well absorbed into the fur, rinse it off with water, treat with shampoo if necessary. If the coat lends itself well to washing, you can put it in the washing machine. After that, comb the fibers with a comb and let the garment dry. Comb again after drying. If the fabric base of the fur coat cannot be washed, remove the remaining paint from it with pieces of a cotton swab dipped in warm water.

Conclusion

So, we figured out how to dye fur at home, as well as what tools you need to have in stock for this.

A brand new mink coat or hat looks very attractive, but it is worth carrying the thing for several seasons, and the fur will lose its shine, and its color will fade. If conventional cleaning methods are powerless, then it's time to paint the mink. But how to do that?

Caution and accuracy!

The best option is to use the services of professionals, since dyeing fur is a laborious and responsible process. When dyeing mink fur at home, there is always a risk of hopelessly ruining the thing.

Well, if you are ready to take a chance, then experiment to start with a piece of fur, which is sure to be attached to any mink product. This, of course, will take time, but you will get some confidence that you will not ruin an expensive item (or make sure otherwise).

Methods for dyeing mink fur

Now in the store you can buy special sprays for dyeing fur. They make it possible to quickly and without much hassle return things to their original appearance, but, at the same time, they have a number of disadvantages: in particular, any light-colored thing, upon contact with your fur coat, will acquire its color, and the color of the fur coat itself will fade again after a few months.

A more lasting result is obtained by using hair dye: after all, the structure of mink fur is similar to the structure of human hair. But you will need a good product from a reliable manufacturer, only in this case the staining will be successful. As for the shade, it is better to choose a paint that is darker than the natural color of the fur.

It is imperative to perform preliminary cleaning of the fur, otherwise the grease and dirt on it will not allow the pigment to penetrate deep into the pile, and the result of painting will be unstable. Degreasing can be done with sawdust or potato starch, which is simply poured onto the surface of the product and then shaken off.

Next, you should treat the flesh on the reverse side with any fatty cream, which will prevent it from drying out. Now you can start preparing the composition, following the instructions that you will definitely find in the paint box.

Using a brush or a toothbrush, apply the prepared solution evenly onto slightly damp fur (use a spray bottle to moisten it), and then with gloved hands, go over its entire surface so that no unpainted areas remain. We lay the fur in the direction of hair growth and wait: the dye composition is held for about 3 hours.

Further, under warm water, the paint is removed using shampoo, the fur is treated with hair balm, thoroughly washed and rinsed in a solution of vinegar (a tablespoon per liter of water). Now all that remains is to carefully remove the remaining moisture with a soft towel and once again apply a thin layer of glycerin or any fatty cream to the skin.

Keep in mind that after painting, the skin may shrink, therefore, during drying, the skin must be pinned to an even solid base with buttons. It is necessary to dry the fur at room temperature. Done correctly, after drying, your mink should remain as soft and fluffy, but acquire a more attractive, intense coloration.