How to dye white fur. How to dye natural fur at home. Applying hair dye

Is there a fur thing in your wardrobe that has long gone out of fashion? Throwing away clothes made from natural fur is a pity, so you can breathe a second wind into it. To do this, the product should be painted or restored to its original color.

Don't save money, take your fur to a dry cleaner or a tailor shop. These organizations know how to handle natural fur and suede.

You have to look for methods of how to dye fur at home when your favorite clothes wear out and lose their attractiveness. Returning faded pile to its original appearance is quite simple. Available methods, suitable for different types of fur, do not require a lot of effort, large investments. After processing, the item will find a second life, without remaining on the last shelf of the cabinet.

Material cleaning methods

Before dyeing your fur at home, you need to clean it. The manipulation is mandatory, because dust particles and burns remain on the surface of the material, which, when stained, will begin to gather into lumps. Cleaning is best done with hair shampoo or dish detergent.

Can be carried out with a composition of detergent and soda (1 tsp each). To them you need to add one and a half tablespoons of salt and 3-4 drops of ammonia. Distribute this composition evenly on the surface of the product. After half an hour, rinse with water, and then dry well. Drying near heaters, on batteries is prohibited.

Types of fur used for sewing clothes

The fur product is different, with its own characteristic appearance. Dyeing rabbit, mink or chinchilla fur is easier than others - they are initially white, so the pile does not need to be clarified first.

Note!

These are extremely sensitive materials. Processing with chemical compounds must be accurate, otherwise the product will be damaged.

The density of the material is taken into account - the amount of paint used, the time of the procedure may vary. Arctic fox is easy to color, retains color. Difficulties arise when you need to dye the capricious mink fur at home. A beaver product is difficult to lighten as the hairs turn yellow.

An unpredictable and difficult material to work with is a muskrat. The color fades quickly, it is difficult to give it an updated look. It is not recommended to process hair dye. It contains aggressive chemical compounds that can damage the material.

Painting methods: how to paint

Fox fur can be treated with a potassium permanganate solution to restore its original color. With other materials, it is unlikely that it will be possible to use improvised methods. For the procedure, use hair dye and suede, clarifiers. Ammonia is the most affordable and easy-to-use method. For the desired effect, you will only need one package of such a product. It is better to take the color 1-2 tones darker than the material. For example, when a mink coat was black and dyed white, the result could be yellow.

Suede paint is only suitable for dyeing certain areas of the garment, for example, the ends of the pile. Means are suitable for lightening High Quality- the rest will be less effective. Spray paints are suitable for large items - they are easier to apply.

Stages of staining

First you need to prepare for staining. You need to put the fur coat on the table. If staining is only necessary for the collar, it is better to protrude it. It is also important to carry out a paint tolerance test on a small section of the product. For this, the composition is applied to the sample. If after the procedure there is no damage to the villi, flesh, the color suits you, you can start painting the product.

For the procedure, you need to use a special brush. Apply the paint evenly so that the shade is even on both the upper and deep layers. After 40 minutes, remove the product with warm water. It is not necessary to dye a fur coat in one tone - highlighting will be an original solution. For this, the colored ends are wrapped in foil. After a while, the foil is removed. Highlighting looks luxurious and rich. Such a checkerboard procedure also looks original. It is recommended to carry out the procedure with a means for processing suede.

Note!

Before the procedure, you need to study the features of the material, some species, for example mink, are difficult to stain. Therefore, the number of helmets will be required.

Staining of the flesh

The flesh is the top layer of the skin on which the hair is attached. Usually it is light, but it also has to be processed, especially old products with thinned pile. Finished, where the flesh is too translucent, it is easier to process with a marker in black. So, the fur coat will look thick, and the flesh will be less noticeable.

If it is a skin, the skin is dyed with paint for leather, fabric. Then it needs to be treated with a fat cream (to soften). Home staining is a risky undertaking, because there is a high probability of damage to the product. If the procedure is unavoidable, use shampoo with a coloring effect, tinting paint. You should purchase high-quality paints. Their application should be careful - you can harm your skin and product.

Fur care after dyeing

Proper care begins with the drying process of the garment. To do this, it is stretched to its full length, preventing loss of shape. The whole procedure should take place naturally without the use of a hair dryer or heating agents. Otherwise, the villi and flesh will dry out - the product will be damaged.

Over time, the villi become hard and lose their original color. Hair balm easily solves this problem. It is usually packaged along with the paint. The product will make the villi soft, with a beautiful natural shine. In addition to the balm, a solution of vinegar with water (1: 1) will be effective.

Features of dyeing polar fox fur at home

Dyeing expensive fox fur at home is not so difficult. To carry out the procedure, you should prepare:

• hair dye;
• glycerol;
• hair balm;
• medical gloves;
• a special brush for painting;
• table vinegar.

1. Treat the flesh with glycerin.
2. Stretch the product as much as possible on a flat surface.
3. Lightly moisten the cleaned surface with water.
4. Apply paint to the product (with a brush), while smoothing the villi with your hand (wearing gloves).
5. Wait 40-60 minutes.
6. Rinse the pile with warm water, then treat with vinegar, then balm and rinse it off.
7. Reapply glycerin to the skin and remove the product to dry.

Features of painting a mink coat

The mink coat has an excellent look. However, over time, it also begins to fade, so painting the fur coat is inevitable. The procedure should not cause any difficulties, adhere to the following scheme:

1. First, it is required from dirt, then apply a fat cream to the skin.
2. Moisten the villi with water by spraying them with a spray bottle.
3. It is also better to apply paint with a spray bottle, after diluting it with water.
4. Comb the fur with a comb and wait about half an hour.
5. Remove paint with warm water and shampoo, then rinse with balm and rinse the product again.
6. Re-treat the skin with a cream, comb the villi in the desired direction.
7. Hang the fur coat on a hanger to dry.

How to dye muton fur

- material popular among fashionistas. A fur coat made of this material is very warm and comfortable. But even such high-quality fur loses its original appearance. It is easy for him to return attractiveness if the staining is carried out taking into account the characteristics of the material. Self-dyeing this fur is no different from manipulating other species.

Mouton has a dense, dense structure, so more paint will be required to process it. It is important to evenly distribute the coloring pigments. This will ensure that the villi are stained. Before the procedure, it is better to test the paint on a small piece of the product. If you have problems, it is better to trust the professionals and refuse to paint the house.

How to dye rabbit fur

After cleaning the material, you need to choose the color of the paint. The best will be dark tones, since for light shades, a preliminary lightening of the pile will be required. The quality of the paint affects the result.

The procedure is simple:

• moisten the villi with water;
• evenly distribute the paint over them;
• remove the dye after a period of time specified in the instructions;
• it is better to wash it off with warm water, then treat the product with vinegar;
• dry the fur naturally in an upright position.

How to dye faux fur

There are no differences in painting between artificial and natural materials. In the first case, there is an opportunity to experiment, choosing any color. Cleaning of such fur is carried out with ordinary soapy water, which is distributed over the entire surface of the product with a sponge. Then you need to treat the villi with paint of your favorite shade. Drying is also carried out without using a hair dryer or a battery.

Finally

Any material loses its original appearance over time. Therefore, the staining procedure is considered quite relevant. It should be borne in mind that the effect of the paint will be short-term and can usually be expected for about 7-9 months. Then the procedure can be repeated. The result depends on the material, the coloring agent and the characteristics of the procedure performed.

Things made from natural fur are not cheap, so they are bought not for one season, but for several years. During prolonged wear appearance the product suffers: the fur is rubbed and faded. How to return your favorite fur coat to its former splendor? Of course, you can take it to the dry cleaner, which implies money spendings, or you can dye the fur at home, thereby breathing new life into the fur thing.

During prolonged wear, the appearance of the fur coat suffers: the fur is rubbed and dulls. One of the possible solutions to the problem is to dye the fur of a fur coat in a different color.

Preparation for painting

To dye your fur, you must first prepare it. During wear, dirt accumulates on the surface of the product: dust and grease particles. It is impossible to wash fur things in the usual ways, but before painting you need to properly clean the surface to be treated so that the paint lies evenly and penetrates well into the villi. What to do? Should gently treat the fur with an alkaline solution which will dissolve grease and remove dust particles.

It is not difficult to prepare the mixture: add 3 tsp to 1 liter of water. salt, 2 tsp. soda, 1 tbsp. l. detergent for dishes and 5 g of ammonia. But another option: water, vinegar and alcohol are taken in the same proportions. All components of the solution must be mixed properly, the dry components must completely dissolve.

You can clean all kinds of fur with such a liquid, for example, mink, silver fox, arctic fox, fox or rabbit. It is possible that after such a simple cleaning, the appearance of the product will improve and the need for coloring will simply disappear.

Perhaps after cleaning, the appearance of the fur coat will improve and you will change your mind about dyeing it.

Before applying the resulting solution to the fur, you need to process its seamy side - the flesh. The fact is that the skins can crack or deform after getting wet. Therefore, after the color is restored, an unpleasant surprise may await you - the product will decrease in size or simply lose its shape. To prevent this from happening, the best thing is to do it properly. treat the flesh with glycerin or any nourishing and fatty cream, for which you need to carefully rip the lining.

After processing the flesh, the fur is carefully laid out on a flat surface and an alkaline solution is applied. It is best to spread it over the surface of the product with a brush. With this treatment, the liquid will be distributed along the entire length of the villi. Then the product must be thoroughly washed off the fur and proceeded directly to dyeing.

Fur dyeing

Hair dye

Fur villi are very similar in structure to hair, so hair dye is often used to dye them. When buying paint, you should not save money - it is better to choose a persistent product, for example, for effective painting of gray hair. The dye should be gentle on the hair, in our case to the fur fibers. You should approach the choice of dye with the same care as when dyeing your hair.

Fur villi are very similar in structure to hair, so hair dye is often used to dye them. The choice of dye should be approached with the same care as when dyeing hair.

So, the tool has been chosen, it remains to choose the right shade. In no case should it be lighter than the color of the fur. In order to dye the fur with high quality and the color lasted longer, it is better to choose a shade one tone darker than the existing one. On black or brown products, color errors are not so noticeable, but white fur can acquire an unpleasant yellow color.

The shade of the selected paint color should in no case be lighter than the color of the fur.

Owners of white fur coats and hats should know that you can say goodbye to ugly yellowness if you first discolor the villi with hydrogen peroxide, and then paint the fur in the required color with ordinary hair dye.

How many packs of paint you need will depend on the density of the fur. For example, the coat of a polar fox or mink is denser and thicker than that of a rabbit. To dye mink fur at home, one package of paint may not be enough, it is better to immediately purchase two, or even three if you have to dye a long fur coat.

Depending on the instructions in the instructions, paint is applied to dry or damp pile. This is best done with a brush or paint brush.

To make sure that the fur will react well to the dyeing solution, and that the color is chosen correctly, it is better to conduct a test on an inconspicuous area of ​​the product before dyeing. It is especially important to carry out the procedure before dyeing rabbit fur, as it is one of the most vulnerable. If the resulting shade meets expectations, the villi do not fall out and do not break, you can safely start dyeing the entire product.

To dye real fur at home with hair dye, you need to follow the instructions on the package. Apply the paint to dry or damp pile depending on the instructions. It is best to do this with a brush or a special paint brush, and then massage it over the entire surface of the fur. The exposure time should also match the manufacturer's recommendations. The video below shows how to properly apply the paint.

Special balms are often included with high-quality paints. They can also be used for fur, after the paint has been washed off. Such care will give the fur of a fur coat, collar or hat shine and silkiness. You can additionally fix the pigment by sprinkling it on the painted product with a solution of water and vinegar (250 ml of water per 1 tsp of 9% vinegar).

Dry fur product on a battery, using a fan or hair dryer is strictly prohibited. In addition, there is a little secret that will help protect the product from deformation. Before you leave the natural fur to dry, you need to stretch it and carefully secure it to some hard surface with pins.

Other means

To dye the fox fur at home, you can use spray paint. The fact is that the villi of such fur are long and, first of all, their tips fade and discolor. To restore the original appearance of the product, it is not necessary to paint it completely. You can simply spray the suede paint, which is sold in aerosol cans, onto the surface.

It is possible to dye fur in this way quickly, without unnecessary effort and risk to the quality of the fur. But the result will not last as long as after hair dye. One season, the thing will be like new, but before the next season, you will have to dye the fur again.

It is better to hang the product and spray paint from a distance of at least 40-50 cm. In order for the paint to be evenly distributed, you need to work out each section of the product, and then comb the fur. You do not need to wash off the paint.

To dye faux fur, you can use both hair dye and suede paint in a spray can. At the same time, the risk that the product is deformed is minimal, so it can be dried using a hair dryer or naturally.

Dyeing fur is easy if you choose high-quality paint and follow simple rules. By freshening up your fur coat at home, you can save money on dry cleaning and at the same time return it to the look of a new thing.

Found a bug? Select the text with the mouse and click:

Do you know that:

The habit of using the washing machine “sparingly” can lead to an unpleasant odor in it. Washing at temperatures below 60 ℃ and short rinses allow fungi and bacteria from dirty clothes to remain on the inner surfaces and actively multiply.

There are special traps to fight moths. The pheromones of females are added to the sticky layer with which they are covered, attracting males. Sticking to the trap, they drop out of the reproduction process, which leads to a decrease in the moth population.

Stretch ceilings made of PVC film are capable of withstanding from 70 to 120 liters of water per 1 m 2 of their area (depending on the size of the ceiling, the degree of its tension and the quality of the film). So you don't have to worry about leaks from the neighbors on top.

The dishwasher is not only good for dishes and cups. It can be loaded with plastic toys, glass shades of lamps and even dirty vegetables, such as potatoes, but only without the use of detergents.

Threads made of gold and silver, which in the old days were used to embroider clothes, are called gimp. To obtain them, the metal wire was pulled for a long time with pliers to the state of the necessary fineness. Hence the expression "pull (breed) gimmick" - "engage in long monotonous work" or "delay the execution of the case."

The easiest way to remove scale and carbon deposits from the soleplate is table salt. Place a thick layer of salt on the paper, heat the iron to maximum, and apply light pressure several times over the salt mat.

Before removing various stains from clothes, you need to find out how safe the selected solvent is for the fabric itself. It is applied in a small amount to an inconspicuous area of ​​the thing from the wrong side for 5-10 minutes. If the material retains its structure and color, you can move on to stains.

Fresh lemon is suitable not only for tea: clean the dirt from the surface of the acrylic bathtub by rubbing with half a cut citrus, or quickly wash the microwave by placing a container with water and lemon slices in it for 8-10 minutes at maximum power. The softened dirt will simply be wiped off with a sponge.

If the first signs of gestation appear on your favorite things in the form of untidy pellets, you can get rid of them using a special machine - a shaver. It quickly and efficiently shaves off clumped fabric fibers and makes things look worthy.

Have you ever thought about how to dye fur at home? But surely every modern woman of fashion has a vest, a sheepskin coat or a fur coat made of natural or artificial fur in her wardrobe. During operation, the fur can change its original appearance, burn out in the sun, or maybe you will come up with an idea to change the appearance of an old thing. Today, organizations in the service sector, represented in sufficient numbers, provide a full range of fur dyeing services, but, unfortunately, with an impressive cost, they do not always meet the expectations of customers. That is why the question of how to dye fur at home, whether it is possible, in general, to carry out this procedure on your own, is very common today. We will talk about him within the framework of this material.

Preparatory activities

The success of the "operation" largely depends on how well the preparatory measures are carried out. Having decided to update the shade of the fur or radically change it, do not forget to clean it, because the dirt prevents the deep penetration of the dye, and accordingly affects the result of dyeing.

For cleaning, you will need an alkaline solution made from a liter of water, 2 teaspoons of baking soda, 1 teaspoon of any dishwashing detergent and 1 teaspoon of ammonia, which can be purchased at your nearest pharmacy. All components must be thoroughly mixed together until a homogeneous mass is obtained. To prevent drying out, apply a greasy cream, for example, for children, to the flesh (the bottom layer of the skin). Then, armed with a brush with stiff bristles, you should apply an alkaline solution to the fur, distributing it over the entire surface, then thoroughly rinse the product under running water and put it in a horizontal position to dry.

How to paint?

If you do not know how to dye fur at home, what means to use for this, you have come to the right place. To date, there are enough professional paints and compositions in specialized stores, but hair dye is still no less effective and affordable. You can find it in any supermarket at an affordable price, and the variety of shades allows you to satisfy the taste preferences of every fashionista.

So, for dyeing, you need paint, a brush with which you will apply the composition to the fur and, of course, rubber gloves - an irreplaceable means of protection. When choosing a brush, give preference to the option with stiff bristles.

Arctic fox fur

How to dye arctic fox fur at home? Luxurious vests made of arctic fox skins have been a trend of the last few years. They will be relevant in the near future, which is why the owners of such a luxury need to properly care for it: update the shade of fur every season, clean it. In addition, modern dyes allow, if necessary, to radically change the color of a fur product. So why not take this opportunity?

Determining the shade

If you do not know how to dye natural fur at home, in particular, fox fur, it is important to get acquainted with some of the nuances of the procedure. They are primarily associated with the structural features of the fur. Of course, the choice of shade lies on the shoulders of the owner of the fur product, but professionals strongly recommend dyeing the fox fur in dark shades. If, on the contrary, you want to lighten the product, you will have to pre-treat the fur with hydrogen peroxide.

Getting started staining

For maximum results, moisten the fox fur with water, then start applying the coloring composition, paying attention to each area. After the entire composition is applied, it is necessary to withstand the time indicated on the package. After that, it is enough to rinse the product under running water and dry it in a natural horizontal position.

Mink

Mink hair is identical in structure to human hair, which is why the choice of dye for mink should be more demanding. The same hair dye is perfect, but it is better to give preference to the professional series, which will give the most natural natural shade, and will last much longer than budget counterparts. But some recommend using spray paints. In this case, it is necessary to apply paint from a distance of 60-70 cm in several layers. Do not be afraid to layering paint - this technology will allow you to achieve an expressive and deep noble shade.

If you are looking for an answer to the question of how to dye mink fur at home, use the general rules that work with any fur. In all, the dyeing procedure completely repeats the procedure for transforming the fox fur described above.

Mouton fur

This once the most popular type of fur is still relevant today. Its popularity is largely due to the warmth and comfort that a product made of muton fur gives. But not everyone knows how to properly care for fur, which is why, over time, it becomes necessary for additional dyeing.

Mouton products are rightfully one of the most unpretentious, but speaking of dyeing, you should be patient, be extremely careful and accurate. So how to dye fur at home with paint in the case of muton. The pile of such fur is quite thick, dense, which is why it is so important to evenly distribute the coloring composition over the entire surface.

And one more thing: before dyeing, test a small amount of pigment on a small area of ​​the fur product - in case of spots and bald spots, it is better to abandon the idea of ​​self-dyeing and entrust it to professionals.

Artificial fur

Do you think only natural fur is admired and admired by those around you? For several years, faux fur products: bright, sometimes extravagant and quite affordable models, have turned the whole idea of ​​fashion, beauty and luxury upside down. If you have a jacket or bag made of this material in your wardrobe, update it with dyeing. Wondering how to dye faux fur at home? We will tell you about it.

For coloring, the same hair dye is suitable - in the case of faux fur you can experiment, give preference to brighter, acidic shades. For preliminary preparation, an ordinary one is suitable soap solution, which is applied with a sponge over the entire surface of the product.

In order to get the perfect result, before dyeing, do not just lay out the product in a horizontal position, but also stretch it well. This will help prevent the formation of bald spots.

Summing up

We tried to figure out how to dye fur at home, and gave several of the most effective ways. With the proper approach to the procedure, the use of quality materials and instruments, you can achieve an amazing result. In addition, dyeing fur, both natural and artificial, at home will not take much of your time and, most importantly, money. We hope that you will appreciate the information provided and be sure to use our advice and recommendations.

Any fur product on any girl looks very beautiful and expensive, and you can wear it for more than one year. However, such things have a huge drawback - after a long wear, the villi begin to fade, lose their original appearance. In this article, you will learn how to dye the fur of a polar fox at home, so that it will be pleasant for you to continue to flaunt in a warm, beautiful thing.

Preliminary preparation

Before you start painting a fur product, you need to prepare it, namely, get rid of all dust and dirt on the villi. Otherwise, after the painting procedure, unpleasant streaks and stains may form on the product, which will make it lose its former attractiveness even more.

So, for the procedure for cleaning a fur garment, it is necessary to prepare an alkaline solution. For a liter of water, the following proportion must be observed:

• 1 tsp dishwasher or laundry powder;
• 5 g of ammonia;
• 12 g table salt;
• 10 g of baking soda.

Important! If you don't have ammonia and soda at home, prepare a solution where other ingredients are needed in equal proportions:

• Alcohol.
• Vinegar.

The cleaning process is as follows:

1. Mix all ingredients.
2. Apply the resulting liquid mixture to the entire area of ​​the fur product using a brush.
3. Rinse the product with clean water.

Important! To avoid drying out, lubricate the inside of the garment with some kind of greasy hand cream.

Moving on to painting

Although any fur is a delicate material, you can dye the fur of a polar fox at home, and even different ways... Now we will talk about them.

Universal way

Since animal fur is very similar in structure to human hair, it is best to use good hair dyes for dyeing fur at home. This method is suitable for dyeing polar fox fur, as well as for mink and rabbit fur.

Important! Do not forget to pay attention to the structure of the villi. For example, mink and arctic fox fur have coarser hairs, which cannot be said about the rabbit or silver fox. For this reason, two packs of colorant may be required.

The first step is to make sure that the correct shade is selected. For this reason, check the effectiveness of the substance on an inconspicuous area of ​​clothing before dyeing the entire product. Farther:

• Apply paint using a brush.
• Spread the mixture over the surface with your own hands.

Important! It is better to use gloves for this.

• Withstand the substance on the product for as long as it is written on the package.
• Rinse the item thoroughly with clean warm water.
• Leave it to dry.

Important! It is better not to use fans or hair dryers during drying - this will only harm the fluff.

• After the product is dry, it is necessary to place it in a solution of warm water with vinegar - this will help to fix the paint on the pile and prolong the wear period.

Important! To add extra shine to your mink, rabbit or arctic fox fur, you can use a hair balm. To do this, apply a solution of water and balm to the fur, let it sit for a few minutes and rinse it off.

It is better to dye fur at home with hair dye in natural, basic colors. Otherwise, the fur may not behave the way you want it to. For example:

• Mink fur from being dyed a light color can turn yellow and lose its expensive look forever.
• And with the fur of a white rabbit, on the contrary, you can experiment, giving it different shades, however, it is strictly forbidden to highlight it.

Important! If you doubt your abilities and are afraid to carry out the dyeing procedure yourself, it is better to take the fur product to a special workshop, where professionals will undertake this procedure.

We paint the mink

A mink fur coat is distinguished by its expensive look and durability to wear. In order to dye mink fur at home, you need to stock up on the following materials:

• Color-matched hair dye.
• Spray.
• Comb with frequent teeth.
• Shampoo and hair balm.
• Fatty cream.

To dye a mink coat or hat, you must follow the given algorithm:

1. Pre-clean the thing from fatty deposits and dust.
2. Treat the flesh with a greasy hand cream.
3. Prepare hair dye according to the instructions on the package.
4. Moisten the fur surface slightly using the prepared spray bottle.
5. Now you can proceed to the main procedure - start dyeing your mink coat at home. To do this, you need to apply the dye using the same spray bottle. The distance should be approximately 55 cm.
6. Even out the tone by going over the surface with a comb.
7. Wash off the paint with warm water and shampoo, rinse the product with a solution of water and hair balm.
8. Apply cream or glycerin to the skin again.
9. Spread the product on a flat surface, wait for it to dry.
10. Comb the pile in the direction of its growth.

We paint a fox fur coat

The Arctic fox coat lends itself best to artificial coloring. In order to paint it in the desired color, you must prepare the following materials:

• Hair dye that matches the shade of the fur.
• Glycerin or fatty cream.
• Balm.
• Gloves.
• Brush for applying paint.
• Vinegar.

To carry out artificial coloring of fur at home, you must follow the given algorithm:

1. Lubricate the flesh with a fat cream or glycerin.
2. Stretch the material on a flat, horizontal surface.
3. Put on protective gloves and start applying the coloring composition, simultaneously smoothing the villi with your hand.
4. Wait for the time indicated on the paint package.
5. Rinse the product in warm water.
6. Rinse it in a vinegar solution.
7. Treat a fur coat or hat with a balm diluted in water, rinse off the solution after a couple of minutes.
8. Lubricate the flesh with a fat cream again, stretch it and let it dry on its own.

Video

From this article, you learned a lot of recommendations on how to dye the fur of a rabbit and other animals. As you have noticed, artificial coloring is not as difficult a procedure as it seems at first. So go for it, get your things in order, but do it carefully!