Tennis String Tensioners

In our online store they are sold as manual stringing machines (with a load) and electronic tensioning machines for tennis rackets ... Mechanical (manual) stretching machines are generally much cheaper. Their construction is simple, but requires some effort to tighten the tennis racket.
Such machines are chosen when you have to pull on a few rackets a week, and it is economically impractical to buy an expensive electronic machine.
Sometimes, they are bought for foreign trips to training camps or competitions.
Accompanying persons, often a coach or parents, purchase such a manually operated machine. it is much lighter than electronic. In addition, especially for such off-site occasions, the Stringer Center
at our online store developed special device , which allows you not to take a heavy counterweight to the hand-held machine, but replace it with a fastening system that will allow you to use a container with water. This makes it possible to lighten the machine by 2 kg, and thus the manual machine Gamma X6 will weigh 8 kg, moreover, it can be disassembled into 2 parts, which can be put in different bags when leaving.
For insurance purposes, a lightweight electronic tension tester can be purchased with this kit. Electronic racket tensioning machines presented here are the European budgetary Premium Stringer 8700 series and professional Gamma and Toalson machines.
We are distributors in Russia for the Premium Stringer and Toalson brands. Electronic Tennis Racket Tensioner choose tennis shops, professional stringers, tennis clubs and sports schools. As a rule, it is assumed that on these machines 4-10 rackets are pulled a day, so they pay off in 1-2 years.
Sometimes, budget electronic stringing machines are bought by the parents of tennis players who are tired of giving rackets at a stretch, wasting time waiting, and also spending some money.
In this case, training in the secrets of stretching tennis rackets is often required. When buying a machine in our tennis store, we conduct a one-day training course, in other cases, training is paid, for quite reasonable amounts.
The training is carried out by stringers of our online store, with extensive experience and experience in the Kremlin Cup and other major tournaments.
In addition, our stringer center carries out repair of tennis racket tensioning machines not only companies for which we are official distributors, but also other
manufacturing companies, we are also always happy to provide technical advice on many issues,
work-related stringing machines .

Guitar strings are a fairly popular product both in domestic and foreign space. Despite the developed product market, the organization of a business for the production of these products is considered profitable. After all, with the right technical and economic approach, the entrepreneur can benefit greatly, especially when working on order.

The main advantage of the future enterprise is considered to be the actual absence of heavy industrial equipment... Automation of production can reduce the number of employees and reduce the investment in organizing the production of guitar strings. However, for stable production, it is important to purchase raw materials, so an entrepreneur will need a contract with a raw materials base or a private dealer.

Search and selection of a working space.

The work space is necessary to accommodate personnel and industrial equipment. The space of the building must comply with certain standards and fully meet the requirements of the entrepreneur.

The main focus should be on the total area. The average size must be at least 350 square meters, taking into account the storage area. It is important to have all the necessary communications connected, in particular water and electricity. The presence of the gas required for production will be a big advantage.

Average rental rates depend on the location, technical condition and size of the building. For example, for the Moscow region, the average market value is at least 7,900 rubles per square meter. In Moscow, the figures will be much higher - from 9,000 to 12,000 rubles. To minimize transport costs, you should choose a suburb.

General approximate rental costs: 9,000 x 350 (total area of ​​the enterprise) = 3,150,000 rubles per year. Prices do not include taxes, repair or refurbishment costs.

The choice of working tools.

Purchase of tools and technological equipment should be carried out only through trusted dealers and best of all in the domestic space. Thus, you can save on transportation and time. In order to minimize the initial costs, it is recommended to purchase part of the equipment used. It is also best to check the performance of all systems before buying. If necessary, you can agree with the dealer for a replacement after the trial period.

Main working systems and equipment:

Seaming machine - 129,000 rubles;
- mini gas oven - 82,000 rubles;
- conveyor line (35 - 50 meters) - 76,000 rubles;
- milling unit - 44,000 rubles;
- small tools for maintenance - 14,000 rubles;
- racks for goods - 4,000 rubles.
Total investments for the purchase of equipment and technological inventory: 129,000 + 82,000 + 76,000 + 44,000 + 14,000 + 4,000 = at least 349,000 rubles. The final results may vary depending on the region of purchase.

Workers at the enterprise.

Workforce is the most important link in an enterprise that affects product quality and business productivity. It is recommended to have a quality approach to the choice. To ensure high reliability and efficiency of the enterprise, it is best to invite already experienced specialists who have previously worked in large factories or enterprises. A list of the most demanded specialties can be distinguished:

Smelter specialist - 52,000 rubles;
- CNC machine operator - 41,000 rubles;
- handyman - 26,000 rubles;
- a loader - 24,000 rubles.

Total investments for the maintenance of qualified workers: 52,000 + 41,000 + 26,000 + 24,000 = 143,000 rubles per month. In this case, expenses for the whole year can be - 143,000 x 12 = 1,760,000 rubles.

Purchase of raw materials for production.

Raw materials for industrial production guitar strings can be purchased at special stores where there are wholesale prices. Strings are available in steel and plastic. Accordingly, you will need two types of materials at once. The cost of plastic for 1 ton is about 9,000 rubles, and of steel - at least 25,000 rubles, taking into account the peculiarity of the brand, which is suitable exclusively for the production of guitar strings.

An enterprise of this level for successful work requires high-quality advertising. The main advertising campaign should be aimed at attracting dealers and ordinary buyers. To do this, you can choose the most relevant and working methods of advertising: press, Internet (web, shops), distribution of leaflets, radio (city), as well as advertising in various music clubs.

Promotion of products through clubs will allow you to get a good flow of customers and a good return on investment for the enterprise. Total expenses, taking into account the specifics of the direction - at least 500 - 650 thousand rubles. In other regions (except Moscow), prices may change.

The choice of implementation method and return on investment.

The main sales stream is best directed to dealers and private buyers who purchase products for further resale. You can also work directly with clients, which will bring additional income... It is better to carry out the sale of goods in bulk. Thus, the company will be able to receive systematic profits that will help the development of the company.

The average cost of a set of quality strings is at least 1,600 per package. Accordingly, when selling more than 500 packages, you can get - 800,000 rubles per month, and for a flow year - 800,000 x 12 = 9,600,000 rubles. With an investment of such a volume, payback can come in 8 - 15 months.

Do you have a Business Idea? On our website you can calculate its Profitability online!