How to reflash a verizon intertelecom modem. Remote firmware. Now we need to raise EVDO

Service of remote flashing of 3G modems and 3G WiFi routers, for any tariff of the Intertelecom operator. If you already have a CDMA modem or pocket router, but it is connected to another operator, and you want to change it to Intertelecom, there is an easy way to do this without leaving your home. To do this, you need a spare Internet, download the program for remote access from the link below and leave a request in the form below. Very soon our manager will contact you, specify the model of your modem, the selected tariff and flash the 3G modem online. The procedure itself does not take much time and will save money, after the firmware you will receive your new number Intertelecom and instructions for use.

All models of CDMA modems and 3G WiFi routers from manufacturers are supported: Novatel, Pantech, Huawei, Sierra, ZTE and Franklin. Before the firmware procedure, it is advisable to install the modem driver, but if it doesn’t work, the manager will set everything up himself. Choose the right one tariff plan and inform the manager. It is also possible to remotely configure a 3G modem or restore the old number in case of its loss or deletion.

List of required programs for accessing the computer and modem firmware:

If your modem is stitched under the number of another operator, or the intertelecom number has not been used for a long time and it has been blocked. We will connect the new number and activate it immediately, after the firmware you can immediately use the Internet services.

Mangust 1.09 is a program for entering operator data into client equipment, 3G modem, phone, mobile wifi router, smartphone or tablet. Simply put, the program is designed for fast (semi-automatic) flashing of CDMA terminals to the operator's network.

The program is often used to "flash" simple CDMA phones and 3G modems. Simple means the equipment that does not require "fine-tuning" and specific input of parameters.

A short list of CDMA equipment that can be easily flashed with Mangust 1.09

3G CDMA modems:

• Novatel U760
• Novatel U727
• Novatel U720
• Sierra 595U
• Sierra 598U
• Sierra 597U
• Sierra 250U
• Huawei EC306
• Huawei EC315 (assuming Rev.B is enabled)
• Haier CE81b

CDMA phones:

• Nokia 1006
• Nokia 1606
• ZTE S183
• Huawei C5700

and other simplest models.

Features of the program Mangust 1.09

This firmware program is endowed by the developer with a number of very convenient and useful functions that are not available in more functional programs.

These functions include the so-called Presets. Presets are a set of values ​​/ parameters for CDMA operators that are entered into the required lines when the required operator is selected.

Simply put, if you need to flash the Intertelecom modem, then just select the port in the top menu and click the "Connect and Read" button. In this case, the serial number of the modem / phone should be displayed in the ESN field. Next, you need to select the desired preset in the top menu, for example Intertelecom, and most of the fields will be automatically filled in. To continue flashing, you need to enter the subscriber number (MIN) in the MIN field and enter the same number in the AN user field before the @ symbol. The last thing to do is in the "chap" field, enter the password that is generated by the operator's billing system - the password for EVDO.

This completes the data entry, now it is enough to press the "Write Main" button, the modem will reboot and you can start using it on the Internet :-).

Thanks to the Presets function, there is no need to select even the operator's PRL file (the list of channels required for network operation), it will be selected automatically. If you need to change the PRL, then just select the required one in the “PRL” drop-down menu. The archive below contains the latest versions of PRL files:

Intertelecom:

• EVDO Rev.A, Rev.B - Simplified_EvDO_Roam_8815.prl
• 1X - Simplified_62015_1x.prl

• EVDO Rev.A - people_evdo_Kharkov.prl
• 1X - people_1x.prl

Also in the archive there are older versions of the network files for Intertelecom and PEOPLEnet.

There are several more tabs in Mangust 1.09 with additional functionality. One of them is "Advanced" thanks to which you can change more subtle operator values.

For example, you can make the modem work in EVDO only mode. To do this, when the modem is connected and the MAIN tab is filled in, on the Advanced tab, in the Prefered Mode field, select the HDR only item and to write it to the modem, right-click on the Prefered Mode inscription, select Send to Phone ". The mode will be recorded after reboot, for this you need to press the "Reboot" button in the lower right corner of the Mangust program.

Another useful item for the user may be the "Ruim config" menu. In it you can set from what the modem will work, from the programmable part or from the Ruim card (analogue of the Sim card in CDMA). Thanks to this function, you can set the modem mode to "Ruim prefered" and use different operators in turn. For example, Intertelecom will work from the firmware part, and PEOPLEnet cards from Ruim.

ATTENTION - This function must be supported by the modem, not all modems can work with the Ruim card and, accordingly, making these changes to a model that does not work with it, you can harm the modem.

On the Advanced tab, there are quite a few different functions that are not needed for every modem, and if the user changes any value on his own, it can harm the software part of the modem.

The rest of the tabs in the program, such as Security, Monitor, Calculator and Additional, are unlikely to be useful for a regular user, because to use them, you must clearly understand what you want to see as a result 😆.

Making certain changes to the program. Accordingly, the firmware of the Intertelecom modem is carried out in order to enter some service data, thanks to which it is possible to easily find a certain network. Realizing that such opportunities exist, some users are beginning to show an active interest in how to flash an Intertelecom modem.

To flash or reflash the Intertelecom modem, you must follow the instructions.

So, if you have an Intertelecom modem that you want to flash, you just need to thoroughly familiarize yourself with the instructions of experienced users and, following all the proposed actions in sequence, practically follow this technical path.

Flashing process

Before you carry out the firmware of the modem, we recommend that you prepare for this. There are no special difficulties at the preparatory stage. It is only important to decide on the Intertelecom tariff that will provide the maximum benefit for you. After that, you need to download the desired software... If this path has been passed, then you can completely proceed to the subsequent actions indicating how to reflash the Intertelecom modem.

Retrieving Modem Information

The flashing process will not take much time, but of course, it is impossible to assume that such a short-term event can be taken carelessly. Unfortunately, if it is not enough to study the issue of how to flash a new or used Intertelecom modem to another number, you can take actions that will lead to disastrous results.

ADVICE. In this regard, you should understand that all your actions to some extent are associated with a certain risk. In case of unreasonable actions, the modem may fail completely. For this reason, experienced users recommend eliminating the elements of creativity and acting strictly according to the instructions.

The Axesstel PST EVDO program is the ideal assistant for solving this problem. By the way, such software is a powerful tool with which it is possible to perform multiple useful actions:

• upload firmware;
• read the firmware file;
• make changes to user settings;
• view network parameters;

Axesstel PST EVDO software allows you to provide Internet connection even in places where previously tried to do it, but failed to do so. The fact is that such a utility demonstrates not just "sticks", the number of which indicates the quality of the connection, but specifically demonstrates the signal quality in dBm.

By downloading this utility, in addition you will receive an extended instruction, which will also contain all the steps that are important to follow sequentially.

After working with such a software application, it is possible to find out important information with which authentication is carried out. These include:

• IMSI;
• CHAP password.

ESN is a specific serial number of the modem, which is directly associated with certain operators. If there is a desire to flash the modem, you should remove the lock so that later you can ensure the operation of such a modem with another operator.

IMPORTANT. Sometimes on the Internet you can find interesting secrets that make it easy to unlock the modem. Unfortunately, this unique method can only work for older modems. Sometimes attempts to make changes to the modem in this way fail, for which reason you have to contact service centres to try to "revive" the dead modem.

You can also unlock the modem using programs that are also offered on the Internet, but only all of them are paid, so you have to put up with some monetary losses.

Flashing process

After the modem has been "released" from binding to a specific operator, it can be flashed. In this case, you can use the Mangust program.

This software is welcomed by many as it has a clean interface. In addition, such a utility is free, so there is no need to take financial risks. But this software is even more attractive because it allows you to perform actions with those devices that for many acted as a hopeless option.

You won't be able to do just the Mangust program, you have to find a PRL file that stores the settings of a particular operator, in particular, Intertelecom. It is in PRL that the frequency lists are included, based on which the modem will be able to successfully operate in various geographic areas.

It is not difficult to find such a file by setting such a query in a search engine, it will be easy to implement such tasks.

It is also very important to have directly at hand:

• Intertelecom phone number;
• A-key (ten digits);
• password and login providing IT / IT connection.

A CHAP authentication password is also required, but this is nothing more than an ESN.

It remains to start the program, wait a short period of time for the program to read all the useful information, after which you can start flashing. All further actions will be carried out by the utility independently. The user can only wait for the successful completion of the process and rejoice in his technical "victory".

So, reflashing the modem is within the power of someone who can concentrate their attention, focus on strictly following the sequential actions indicated by the algorithm.

Today we will get acquainted with the instructions on how Intertelecom does the firmware of the phone with our own hands. We will carry out the entire stage of connecting the number on our own, without any outside help. Thus, saving a lot of time, money, nerves. And in the future, we may even start earning extra money on this service.

Let's move on to the main part, or what is needed to program the phone for Intertelecom.

- The phone or smartphone must support the 800 MHz CDMA communication standard.

- Personal computer with Windows on board.

- USB cable to the phone and installed drivers.

In the device manager, the picture should look like this (of course, its own model will be displayed and the port number will be different):

- Now, we need to receive data with a number, a code for authorization on the Internet, a MIN code for calls. To do this, follow the link and place an order:

- Download DFS (someone likes QPST, or Mangust, but I use this particular program): https://drive.google.com/open?id=1z3i-gnYmp5jhfwYlw_jIUznmHW7i-Ubk

- PRL file, which we download and extract from the archive above, the password “site”, for example, on the desktop, so as not to search for a long time.

Install and run DFS. Let's start:

1. We click 2 times on the diagnostic port of the phone.
2. After the serial number appears at the bottom, click on it. The additional window will close, and on the main one, everything will be filled with yellow or green numbers.

Go to the underlined tabs:

1. We send SPC code.
2. We read the data.
3. We enter exactly MIN (024ххххххх) with the addition of 25504 in front of it in the selected block.
4. For handsets that only call and without the Internet, we leave it as it is. For smartphones, the value will be CDMA_HDR or
5. Let's write down our edits.
6. By clicking on Load, find the extracted PRL and select it.
7. Let's write this parameter too

The next tab is relevant for devices that can provide Internet access, or rather support EVDO. For other models, this item is useless:

1. We count.
2. Fill in PPP with IT login and password.
3. HDR AN Long we will prescribe, this time it is the number with the leading zero. And in Pwd we will score the resulting Chap-SS. In the block highlighted in a red square, we can change Rev A / B, which is relevant only for those chipsets that support these technologies. With Rev B, a faster discharge of the battery is possible, as well as an unstable operation.
4. Let's write it down.

Mobile IP closing tab. Here we count, and check that everything is as on a srkin in a square. If different, then change and write down. The last button in the firmware will be Reset. The device should restart, if it doesn't work, we help the phone to restart manually (turn off / turn on).

After switching on, we check incoming and outgoing calls. For EVDO devices, we check the Internet. If everything works, then congratulations, Intertelecom phone firmware was successful, and you coped with this task. In gratitude to the author, we share the instructions with others. If you have any questions, ask in the comments. Well, we save, and most importantly, we earn with Metra!

Likewise, programming takes place in the phones of the following brands:

How everything happens, we can see in the video:

This question is often asked: how to flash a CDMA modem for GSM? Or how to unblock an Intertelecom or Peoplenet modem for Kyivstar, Vodafone, Lifecell or any other operator. Answer:

1. No way!
2. Because these are modems of the CDMA standard, and the GSM standard is used there. These are two different things, and they are incompatible.
3. You can flash a Peoplenet modem under Intertelecom and vice versa. There are no other options, because both operators operate in the CDMA standard at 800 MHz. There are no other operators working in this standard in Ukraine. How to do it, just below.
4. If you have doubts, then read specifications, or rather the supported communication standard, we throw it into a search engine (this is Google) and read it. Then we ask a question in the search engine of another operator with the addition of "WCDMA standard" and read it too.

How to flash a modemPeoplenet under Intertelecom?

Two options (starter package and number will be provided):

1. Free, everything is painted here:
2. Contact a specialist and pay for the service, everything is written here:

Which models does this apply to (the list is not complete, all that is CDMA in the characteristics, this is all about them). Or those modems that cannot be flashed for Lifecell, Vodafone, or Kyivstar. If your model is missing, ask a question in the comments, I will definitely answer:

The only possibility is to take two modems of the SDMA standard, which we already have, as well as the ZhSM, which must be bought and simply swapped the cases. The question remains: why? If you have already purchased another modem. The analogy is often drawn with a gasoline engine and a gasoline engine. You smile when you pour the wrong fuel into the car at the gas station and wonders why. This is how I react when I am approached with such requests. It is impossible to know everything, but before doing anything, you need to understand at least a little, just.

Simple explanation of how to flash a CDMA modem for GSM. If you want to go deeper into the details, questions in the comments can help. Ask, whatever you like, we will answer.

How is the firmware online Intertelecom: