Scales ohaus pioneer. Portable portable automobile scales VA-P “Pioneer. There are variants according to the type of sensor application
An advanced development of the Fiztech Group of Companies, which has gained fame throughout Russia. They are used for static weighing and weighing in motion of vehicles (TS) during accounting and technological operations, as well as for technological control of axle loads on the roadway. The most popular kit consists of two platforms. However, it is possible to use four, six or more platforms together to weigh the entire vehicle.
Truck scales are included in the State Register of Measuring Instruments Russian Federation under №70151-18 ... The certificate of type approval of measuring instruments is valid until January 16, 2023.
Peculiarities:
- The balance is a "constructor" that allows you to manually configure the weighing structure for any individual requirements. For frequently encountered weighing tasks, ready-made solutions;
- A rigid honeycomb panel, the use of low-alloy and carbon steels provide a combination of large platform sizes and their minimum height, which greatly facilitates a car's drive-in;
- Due to its low weight, the scales can be easily transported from place to place by two people;
- The scales can be installed on any solid base - asphalt, concrete area or road slabs;
- A wear-resistant anti-corrosion coating on a polyurethane base is used;
- Reliable adhesion to the road surface thanks to wear-resistant rubber shock absorbers of the sensor mounts;
- The scales are used only for those that have proven themselves in Russian conditions, incl. in the North, SigmaTech sensors;
- Additional protection of the sensor mounting unit from dust and dirt;
- Increased accuracy due to the use of two weighing ranges;
- The scales are efficient in a wide operating temperature range at temperatures from -60 to +70 ° С;
- Long-term autonomous work from a battery (or 4 AA batteries for the T-11 terminal), printing receipts on a mobile printer and wireless data transfer to a PC (optional);
- There are no restrictions on the speed of arrival during static weighing, dynamic overloads, accuracy of wheel positioning on the platform;
- The function of summing up the weighing results;
- Lightweight removable rubberized ramps (optional), due to their excellent grip on the road, provide a comfortable ride;
- Modern design;
- The scales are manufactured from Russian components at a Russian enterprise;
- The scales are completed with software - electronic journal weighing, with the ability to upload data archive in XML format (computer - Customer);
- The high reliability of the scales is confirmed by a 5-year warranty *.
* when performing preventive routine maintenance.
The balance is available in two versions, marked:
- L- scales are made of alloy steel;
- NN- the scales are made entirely of stainless steel (for harsh operating conditions). We are the only ones in Russia who produce bed scales entirely of stainless steel.
According to the type of sensor application, there are options:
- "Standard"- the scales are designed for operation in normal climatic conditions;
- "Extra"- option for intensive use in the most difficult conditions. The scales are equipped with stainless steel sensors with an extended temperature range, have complete tightness of all components and their connections, and protect the cable from damage.
| Options | Execution | ||
|---|---|---|---|
| "Standard" | "Extra" | ||
| Sensor material | Alloy steel | Stainless steel | |
| Dust and moisture protection class | IP67 | IP68 | |
| Operating temperature range according to GOST 15150, ° С | Limiting | -30 ... +40 | -60 ... +70 |
| Of nominal | -20 ... +40 | -30 ... +40 | |
| Discreteness | Platform model | ||
|---|---|---|---|
| VA-P "Pioneer" - 6t | 6 | up to 3 t - 1 kg, over - 2 kg | VA-P-3t |
| VA-P "Pioneer" - 10t | 10 | up to 6 t - 2 kg, over - 5 kg | VA-P-5t |
| VA-P "Pioneer" - 15t | 15 | up to 6 t - 2 kg, over - 5 kg | VA-P-10t |
| VA-P "Pioneer" - 20t | 20 | VA-P-10t | |
| VA-P "Pioneer" - 25t | 25 | up to 15 t - 5 kg, over - 10 kg | VA-P-15t |
| VA-P "Pioneer" - 30t | 30 | up to 15 t - 5 kg, over - 10 kg | VA-P-15t |
| Platform model | Weighing limit of one platform, t * | Discreteness * | Platform size, W x D, cm |
|---|---|---|---|
| VA-P-3t | 3 | up to 1.5 t - 0.5 kg, over - 1 kg |
75 x 56 96 x 62 |
| VA-P-5t | 5 | up to 3 t - 1 kg, over - 2 kg | |
| VA-P-10t | 10 | up to 6 t - 2 kg, over - 5 kg | |
| VA-P-15t | 15 | up to 6 t - 2 kg, over - 5 kg |
* when using paired platforms, the value is doubled.
Equipment with terminals and software
The terminals for the scales are selected separately, taking into account the functions you need.
All terminals are equipped with an indicator with large numbers and a membrane keypad to prevent dust and moisture from entering. Additionally, they can be equipped with a battery, a connector for data transfer to a PC or a ZigBee wireless radio channel, duplicate indicators.
The terminals for weighing in motion are connected to the PC (laptop) of the Customer through the RS-232/485 port (using an adapter, it is possible to connect to USB or Ethernet ports).
The software supplied with the balance provides a convenient display of weighing results when weighing in motion.
With terminals T7, T9 and T11 The balance operates in a dual-range mode for more accurate weight measurements.
Detailed technical characteristics of the terminals can be found in the "Terminals" section.
Additional options:
- A set of lightweight removable rubberized ramps;
- Option "Air" Modules built into the platform for wireless data transfer to a PC (laptop), tablet or terminal. It is possible to simultaneously connect 2, 4, 6 or more platforms;
- Rollers built into the platform, thanks to which the scale can be easily rolled from place to place by one person.
- Intermediate platforms are installed between two weighing platforms, supported on them. Allows to weigh the entire two- and three-axle axle in one weighing.
- Leveling platforms. Do not participate in the weighing process. Allows you to align all the axes of the vehicle relative to the horizontal plane and thereby significantly increase the accuracy of weighing.
The scales meet the requirements of GOST 29329-92 and are listed in State Register measuring instruments under No. 19242-09.
Automobile padded portable scales for axle weighing VA-P "Pioneer" Group of companies "PhysTech" Small-sized electronic truck scales for static axle-by-axle or wheel-driven weighing of vehicles with alternate or simultaneous (in the case of connecting platforms) wheel collisions with platforms. It is possible to use four, six or more platforms for weighing the whole vehicle in one run. An economical option for weight control of vehicles, the organization of mobile weight posts and control of the load on the roadway in open areas.
Analytical balances OHAUS PA-214C are presented in the catalog of LLC "EXITECH". This model is designed for weighing samples, substances and materials in research, production and educational laboratories. The device is suitable for daily intensive use thanks to the combination of simplicity, convenience and an intuitive interface. The balance is accurate to a special class (I). The largest weighing limit is 210 g, and the resolution is 0.0001 g.
Peculiarities analytical balance OHAUS PA-214C:
- internal calibration according to the patented InCal technology;
- windshield with three doors for convenient placement and removal of samples;
- high-contrast display;
- the presence of a hook for weighing under the scales;
- RS232 interface, which allows data transmission to a computer or measuring system;
- counting mode for counting the number of identical parts;
- automatic zeroing and tare deduction;
- formation of a measurement protocol in accordance with GLP standards.
In addition to the OHAUS PA-214C analytical balance, a portable printer, an anti-theft device and an auxiliary display can be supplied.
Laboratory balance PA 214C is an analytical equipment that is characterized by high measurement accuracy, reliability and long-term operation. You can buy products on our website with a guarantee and delivery.
Features of the PA 214C model.
The product is equipped with a round steel platform, a plastic casing and a special windproof casing. The results are displayed on a convenient contrast display. The package includes a hook for weighing under the scales. With the help of a special interface, information can be transmitted to a computer.
The model has useful functions, in particular, counting mode, automatic zeroing, tare compensation. The highest weighing limit for this model is 210 g.
You can buy high-quality scales with warranty documents by calling our company.
OHAUS Pioneer laboratory analytical balance (PA)
Ohaus Pioneer is a series of analytical (0.0001 g resolution) laboratory balances. This range includes 6 models of analytical balances that can be used wherever high accuracy of mass measurement is required. These are enterprises and laboratories of various industries, laboratories of medical, scientific and educational institutions. Ohaus Pioneer balances combine simplicity of design, ease of use and an optimal combination of functions.
The scales are certified in Russia and other CIS countries.
Analytical scales Ohaus Pioneer are included in the State Register of Measuring Instruments under No. 38796-08.
Metrological and specifications laboratory balance Ohaus Pioneer (PA)
| model | PA64 PA64C |
PA114 PA114C |
PA214 PA214C |
| max, g | 65 | 110 | 210 |
| discreteness, g | 0.0001 | ||
| reproducibility (RMS) at max, g | 0.0001 | ||
| linearity, g | ± 0.0002 | ||
| calibration range | up to max | ||
| settling time | 3-5 sec | ||
| mass of weight for calibration range and for linearity calibration, g |
50E2 | 50E2 or 100E2 |
100E2 or 200E2 |
| scales platform dimensions, mm | Ø90 | ||
| own weight, kg | 4,6 | ||
| overall dimensions of scales, mm | 196 × 287 × 320 | ||
| dimensions in packing, mm | 495 × 395 × 522 | ||
| accuracy class | Special (I) | ||
| temperature range with normalized errors, ° C |
from +10 to +30 | ||
| range of acceptable operating temperatures, ° C |
from +5 to +40 | ||
| relative humidity, % | from 15 to 80 | ||
| power supply | network adapter; scale power input: alternating voltage 8-14.5V, 50 / 60Hz or constant voltage 8-20V, 4W | ||
Internal calibration InCal for models with the index "C" in the name.
Ohaus Pioneer (PA) Laboratory Balance Features
External or internal (InCal) calibration.
Selectable range calibration points.
3 points linearity calibration.
Automatic zero correction.
Automatic taring.
Piece counting.
Percentage weighing (allows you to determine the mass of objects as a percentage of the mass of a pre-weighed sample).
Weighing hook under the scales for determining density and specific gravity.
Selecting the discreteness of displaying the results.
3 modes of interference filtering.
RS232 interface.
Configurable communication options and print options.
High contrast display.
Menu lock system to protect against unauthorized changes to settings.
19 units of measure of mass, including the ability to set an arbitrary non-standard unit of measure.
The ability to restore factory settings.
Measurement report in accordance with GLP standards.
Convenient, easy to disassemble and easy to clean protective cover with three doors.
A built-in level located on the front panel allows for easy alignment.
Protected against ingress of dust and water.
