Dot painting lizard stencils. Spot painting. Dot painting for beginners: training on simple shapes

Stencils for spot painting are very convenient to use in creativity, especially for those who do not know how to draw, but want to create beautiful things with their own hands. Ready-made stencils can be purchased at the store or made by yourself by cutting them out of paper or plastic. Drawings for stencils can be taken both from the Internet and from books, for example, coloring pages. For spot painting, stencils of patterns, flowers and butterflies are suitable. The more lines, the better, since dots need to cover the entire drawing.

We offer for beginners several visual master classes on painting with dots using stencils.

Starting with the basics

Dot painting can be used on any objects made of various materials. Special contour paints can be used for spot painting on glass, leather, wood, ceramics, etc.

Consider how you can paint a bottle, plate, glasses and box using a stencil.

First of all, you need to prepare the following materials and tools:

contour paints in tubes of any color;
liquid for degreasing surfaces (glass or ceramic), such as alcohol or nail polish remover;
prepared picture or ready cut stencil;
Scotch;
cotton swabs to remove excess paint and correct mistakes;
a needle for cleaning the tube.

No brushes are needed as the paint is applied in contours and dots directly from the tip of the tube.

It is worth noting that the diameter of the point depends on the force of pressure on the tube: the stronger and longer the pressure, the larger the point.

Before work, it is recommended to practice on paper to put dots of different sizes at an equal distance. You can try to draw a simple geometric pattern, a circle, a wave. It is necessary to ensure that the points do not merge into one line, but also do not look scattered.

Ceramic or glass plates are easier to paint than other items because the surface of the plate is usually relatively flat and smooth. If you plan to use the plate for its intended purpose, then it is better to take a glass plate and paint from the outside. In any case, painting on a ceramic plate is done from the inside. If this plate is intended for food, it must be covered with a special acrylic varnish in several layers to protect the painting from water and mechanical stress.

A plate made of any material is suitable as a decor - ceramics, glass, wood. It can be painted from any convenient side. As a rule, such plates are very flat, without embossed edges.

Working process:

Degrease the surface of the plate;

Choose a stencil with a round pattern to fit the plate and secure it with tape;

Start painting along the contours of the drawing, putting dots at a great distance from each other (they will serve as a guide);

Let the paint dry and peel off the stencil;

Supplement the drawing with dots, changing their size and color;

Leave the finished craft to dry;

Cover with acrylic varnish if necessary.

Stencils for plates can be as follows:

Decorating bottles is a popular activity among novice craftsmen. Finding an unnecessary glass bottle will not be difficult, and there is plenty of flight for imagination here.

Spot painting can be one of the ways to decorate a bottle, or it can be an addition to other types of decoration. For example, a bottle can be painted with acrylic paints, and the finish can be done with spot painting. Or you can decorate decoupage with colored dots.

Small stencils depicting vegetation or simple patterns are suitable for painting glasses. You can also draw a freehand sketch. If contour drawings are used, then they must be fixed on the inside of the glass with tape or electrical tape.

When the template is well fixed, you should start painting, focusing on the lines of the drawing.

Spot painting on glasses can be used as an additional decoration for a drawing made with acrylic paints.

Second option

Caskets are painted a little more difficult, since it is necessary to process all sides and edges. It may take some time, but the result is sure to please.

It is not necessary to take the box directly for painting. It can be any tin or wooden box with a lid. Beautiful and original painting will help transform a simple box into a real box.

Working process:

Make a stencil to size. It is necessary to choose round, square or rectangular patterns for the lid and walls of the box. Then the pattern is transferred to a plastic corner folder and carefully cut out with a clerical knife.

Fix the finished stencil on the box and mark the contours of the drawing elements with rare dots. Let the paint dry and remove the stencil.

Proceed with spot painting, guided by the outlined points. It is desirable to fill the pattern with dots with different colors.

Also paint the sides of the box and leave to dry. After that, you can varnish the product for better fixing and protection of the paint.

Such an elegant box can be a great gift and a convenient place to store small things.

Below are examples of stencils patterns and patterns for painting with dots.

The subtleties of the choice of materials for painting

Using various types of paints in your work, you can decorate cutlery, tableware elements and any other interior items. For painting on dishes, it is better to choose paints that are distinguished by increased moisture resistance and photosensitivity.

When choosing paint for decoration, consider the type of surface on which they will be applied. Otherwise, the pattern you created will not last long on the subject. Painting can be done using the following types of paints:

Clay objects - paints for ceramics and glass. They are also called contour paints. They are sold in small tubes with an elongated spout.
Metal accessories - enamel painting paints. Decorations decorated with enamel are distinguished by their durability, brightness and purity of colors.
Textile products - "fabric" acrylic. Garment contours are less abrasion resistant.

Tip: when buying paints, test the tubes, paying attention to the density of the composition. To determine the consistency, press the tube: the paint should not come out too easily, forming a puddle, but it should not be too difficult to squeeze out.

Paints for painting are:

water-based - they are easily washed off with water;
on organic - removed from the surface only with a solvent such as white spirit.

For painting surfaces in contact with food, special paints should be used, which must be fired at a temperature of 600-800 ° C. It is impossible to use such paints at home. For these purposes, craftswomen choose self-hardening paints. They harden without firing for 2 days. But such circuits are less resistant to detergents. Dishes painted with self-hardening acrylic paints require more careful handling.

There are two types of paints for painting dishes:

Overglaze - a mixture of pigments with fusible glass. They are applied to glazed dishes.
Underglaze - a mixture of pigments with glaze. They are used to decorate unglazed surfaces. A transparent overglaze layer, which makes the dishes shiny, is applied already on top of the drawing.

Depending on what effect you plan to get, choose paints: forming a matte or glossy coating, translucent stained glass and opaque opaque compositions. It is convenient to use 3D gels to create volumetric points and "pearls".

Highlights when painting utensils

Point-to-point is a rather demanding type of creativity. Indeed, the presentability of the product depends on the perseverance of the master and the accuracy of the work. This technique does not tolerate slowness and carelessness.

Painting tableware, be it decorative plates or graceful vases, using the point technique includes a number of main stages:

Preparation of the base. The surface of the object is degreased with alcohol or nail polish remover.
Background drawing. The background of the desired shade is applied to the prepared base with any paint: gouache, acrylic, automotive, stained glass. For this purpose, it is convenient to use an acrylic primer: when applied thickly, it gives a cloudy white shade.
Marking the future drawing. It's better to come up with a drawing in advance, but even if you start to improvise, you will certainly get a wonderful pattern.
Drawing creation. By alternately applying dots of the selected color and size, an ornament is created.

Master class: spot painting of a glass bottle

Spot painting is able to transform any objects, making them original decorative elements. Using this technique, you can easily transform an inconspicuous glass bottle into an amazing vessel or unusual flower vase.

The main thing is to choose the texture and color palette of paints so that the accessory created by your hands will organically fit into the design of the room.

Selection of materials and tools

To make an original vessel you will need:

Glass bottle;
degreaser;
universal soil;
acrylic paints for painting on glass;
flat wide synthetic brush.
aerosol varnish to protect and fix the pattern.

When choosing a glass shade, keep in mind that spot painting looks most impressive on dark surfaces.

It is convenient to use flat glass bottles for painting dishes. Background paint is applied to them only if the shade or transparency of the product is not satisfied.

Preparation of the glass base

The bottle is cleaned of labels and thoroughly degreased with an alcohol-containing liquid. Apply a primer with a wide brush, evenly distributing it over the surface.

A pattern for decorating a bottle can be taken from the Internet, having spied ideas on thematic forums, or you can come up with it yourself. To make the pattern even and symmetrical, a strip of a notebook sheet is fixed on the outer walls of the bottle with adhesive tape. The width of the stripe will determine the size of the pattern. In the proposed version, the pattern will be 13 cells wide.

The central line of the pattern is drawn along the edge of the glued sheet.

Application of basic patterns

Start painting the bottle. A strip of several points of the same size is applied along the upper edge of the sheet with an acrylic contour. When working with a contour, the tube must be held vertically. Thanks to this, the dots are smooth and symmetrical.

Tip: blots and inaccuracies that often occur when drawing dots can be easily eliminated with a hygienic stick moistened with alcohol.

Leaf cells will help you work out the distance between points and create a straight line

Use stencil templates to create smooth semicircles and bends in the pattern. You can make them yourself by cutting out a blank of the desired size from the same sheet of paper. To determine the size of the semicircles, you need to divide the bottle circumference by the number of elements.

Tip: do not forget to re-degrease the surface from time to time with a napkin soaked in alcohol, since fingerprints will reappear on the glass during the painting process.

Attaching the template to the glass, make a contour of small dots

Painting framing contours

To obtain ornate openwork patterns, dots are applied in different sizes, alternating between them.

Drawing hearts and flowers, feel free to let your imagination run wild

When creating new elements of the ornament, a stencil of the required size is cut out again and outlines for the future contour are made on it.

The points marked according to the template are "pointed" with an acrylic contour

If the small details of the pattern can be done "by eye", then when painting large elements with acrylic paints you cannot do without templates.

The bottle can be painted with paint until the entire surface is covered

Anyone who has ever tried to create lace patterns from a scattering of dots will confirm that the process of creating an ornament is simply mesmerizing.

Video: the process of painting on glass with acrylic paints

Plate decoration using the "point-to-point" technique

The technique of painting plates is not much different from the process of decorating a bottle described above. The first step is to carefully degrease the surface and transfer the sketch markings to a glass or ceramic surface.

Experienced craftswomen can draw without sketches right away on a plate, coming up with patterns along the way. We still recommend that beginner needlewomen think over the artistic concept in advance by choosing ornaments and choosing a color palette for themselves.

For the first work, it is most convenient to use transparent glass plates as a basis.

A sheet with a sketch of the motive for the drawing is placed under the plate, and then the contours are drawn point by point

Before you start painting, practice creating outlines on paper from small and large dots, placing them at the same distance from each other.

It is better to start the contouring from the center of the plate, gradually moving towards its edges.

So that the drawing does not accidentally shift during work, it is better to glue the cut template for a while on the back of the plate with adhesive tape or electrical tape.

Draw on the principle "from general to specific": starting with drawing large outlines and finishing with the elaboration of small details

When creating lines, keep such a minimum distance between points that they are well "read", but at the same time do not merge into a solid line

If drawing from tubes is difficult for you, draw dots with a toothpick or needle

The choice of shades and their alternation depends only on your imagination and the chosen pattern.

The paint applied to the plate should harden.

Under natural conditions, the paint hardens within 24 hours. To speed up the process, blow dry the surface and leave the decorated plate for 10-12 hours. After the paint has completely dried, it remains only to fix the drawing with varnish.

Video master class: painting accessories using the "point to point" technique

Having mastered the technique of spot painting, you can easily bring your ideas to life, developing the makings of an artist in yourself. Decor elements created with their own hands will become a source of pride for the hostess of the kitchen and a worthy interior decoration.

Dot painting, or point to point, is a kind of decorative and applied art that has come to us from time immemorial. Its elements can be traced in rock paintings of indigenous Australians, sacred masks of Africa and Indonesia. Modern artists have left in the past bone sticks, paints from plant sap and use acrylic outlines, schemes, stencils for spot painting.

A drawing created from specks collected in lines and shapes is called spot painting. At first glance, it may seem that this is a complex technique, requiring first of all patience, perseverance and strict adherence to the originally set pattern. In fact, the diagrams serve more for inspiration or a very rough outline of the outline of the future drawing.

This technique is more meditative than painstaking. It requires a firm hand and the ability to detach from the outside world, and not counting dots in a pattern. If you put a finished product and a pattern next to it in embroidery or when weaving with beads, it can be difficult to distinguish one from the other. Ornaments for painting with dots are not a rigid instruction, but a guide to action. Craftswomen selling their works via the Internet must indicate under the photo of the sample that they will not be able to create exactly such a product.

In the point to point technique, they paint pictures, decorate dishes, furniture, clothes, and accessories. Recently, interior designers have been decorating entire walls with patterns of round and drop-shaped spots. Wood, glass, metal, plastic, artificial and natural leather, textiles - this is an incomplete list of materials used for dot painting.

It is interesting that often people who have not been involved in any painting before begin to work in the point to point technique. Then they switch to oil, watercolor or pastel.

Preparation of materials and tools

Previously, a sharp bone or wooden stick was used as a tool. Paints were made from plant sap or clay.

Acrylic outlines

Nowadays, acrylic contour is considered the main tool in spot painting. This is a small metal (rarely plastic) tube with a long nose. It is very convenient for them to put dots directly on the surface to be decorated.

For contours, a thickener is added to acrylic so that the paint does not flow and, when dry, retains its volume. Using various additives, the following varieties are produced:

When buying, you should pay attention to the purpose of the paint. For example, on glass, the contour for the fabric will spread, and the stained glass is unsuitable for painting textiles.

Painting without contours

If you wish, you can use ordinary acrylic paint from jars - it costs much less. Then you will have to use as a tool:

a toothpick;
awl;
orange stick for manicure;
silicone or regular thin brush;
stack.

Some craftswomen do not use contours at all - it is not easy to assemble a decent collection of flowers.

Surface preparation

Wood, and, if necessary, metal, is sanded before work. Any surface other than cloth and paper must be thoroughly degreased with an alcohol-containing liquid or tissue. For glass or ceramics, acetone can be used.

The contours are applied to a previously primed or varnished surface. Glass and ceramics can be painted immediately. Primer and varnish are sold in art stores, when buying, you need to carefully read the label and use only on the surfaces for which they are intended.

Dot painting can be used to decorate decorative dishes. If you are going to use kitchen utensils for their intended purpose, inlay only its outer part. Although acrylic is considered an environmentally friendly material, it is not known what reaction it will enter with food.

Do not use food varnish on utensils used for making and preparing food. Some of its brands are designed to cover pipes, floors and walls in food processing units, while others require long-term processing at high temperatures and are not suitable for use at home. For handicraft use, there are special paints for firing, products painted with them are baked in the oven.

Additional materials

Each needlewoman for painting has her own set of aids. You will definitely need:

sponge or sponge for applying primer and background;
a napkin and a needle for cleaning the contour nose;
a hair dryer to accelerate the drying of acrylic;
a pencil for marking;
ruler and measuring tape.

All kinds of flaws are corrected with a cotton swab. Fresh paint is washed with plain clean water, dried paint - with acetone or nail polish remover.

Patterns for painting

In spot painting, stencils and patterns are often used, but are not a required attribute. Craftswomen can spend hours looking at them in search of a suitable idea. There are no classifications of painting techniques regarding the use of templates, they can be conditionally divided into three groups:

What most dots painters use are templates. Many of them collect in a special box or file geometric shapes of different sizes made of dense material, crescents or paisley (Indian cucumber). Inexhaustible sources of ideas and schemes for painting (not only dot) are:

Work on schemes

In point to point, any drawing will never exactly match the source. When transferring a pattern, the center of the product is first outlined (it does not always coincide with the geometric one), then the main axes and contours are drawn. Lines are drawn with a soft, simple pencil or a pencil intended for glass, a thin brush, and acrylic. If you chose the latter option, consider what role this line will play in the finished product. It can be done:

inconspicuous, almost in tone with the base;
contrasting, emphasizing the bitmap;
shading the main pattern, using paint of the same color, but in a different tone.

The recommended working order is from the center to the sides, from top to bottom. This is due to the peculiarity of working with contours. For example, if you start filling a circle from the outer edge to the center, you risk not guessing and ruining the drawing. We'll have to erase the entire fragment with acetone, prime, tint and start painting anew. They draw from above because during operation it is convenient to hold the product by the lower part. However, these are all recommendations that need to be adapted for yourself.

Fitting patterns to different surfaces

The reason why point-to-point diagrams have not taken the lead is simple. The surface to be painted is rarely even. Even an ordinary plate has a configuration that is difficult to stencil - it has a round bottom, then there is a rim and a raised edge, often curved or embossed. To accurately map the diagram to a regular bottle, you will have to perform complex calculations and scale changes. Such work requires certain knowledge, time and patience, which greatly complicates the work, and deprives some of the pleasure of creativity.

Smooth surface

On straight, smooth surfaces, even beginners will not have difficulties with applying patterns. A diagram or stencil is placed under transparent glass or plastic, fixed with tape and work calmly.

A carbon paper sheet of a contrasting color is placed on the tinted surface, then the template is carefully drawn. After finishing painting, the reverse side of the transparent blank can be painted in any color.

Painting glasses

Patterns for spot painting glasses are placed inside so that the pattern can be seen through the glass. Then fill the container with toilet paper or tissue. For better attachment, the edge of the template is glued to the glass edge with tape.

Glasses made in mixed technique look best, where the usual painting is complemented by point, or vice versa. Complements made of rhinestones or beads will be good.

Decorating plates

It is more difficult with the cymbal - its configuration only seems simple. Any ornament will be distorted due to the bend.

You can get out of the situation using or combining the following options:

Mark the center of the drawing and major axes. Correction of the picture is carried out when drawing the contours.
The template is tightly applied to the plate. In those places where folds are formed, the pattern is cut and corrected.
Large parts are cut out of the diagram. They are individually transferred to a plate, then the overall pattern is corrected.

It is easy to apply a fantasy drawing or ornament from a scarf or a piece of fabric to a transparent plate. To do this, the textile product can be "clamped" between two dishes or put on a pillow, pressing down on top of the painted surface.

Bottle templates

It is convenient to use stencils, patterns or any drawings of an elongated shape here. Circular ornaments, especially counting ones, look impressive on cylindrical objects, but in order to correctly place the scheme, you will have to work hard. The difficulty lies in connecting the ends of the circuit. But here there is a way out, you can:

carefully calculate each rapport and adjust the size to the circumference of the bottle;
take ornaments with short repeating fragments, mark the cylinder, with a slight discrepancy, correct the drawing by changing the distance between the points;
do not connect the ends of the ornament, decorate a free strip using a different technique or other pattern.

For a beautiful piece, let the painted piece dry before moving on to the next piece. You can use a hair dryer to speed up the process.

Point painting technique ... with samples, with templates + 2 MK

Many have asked me to tell you how I make dot patterns. Apparently the time has come for my first MC using the point-to-point technique (point to point). Of course, I can't compare with the eminent masters of the Internet, and I'm not a very good photographer either, but I think something will become clearer for those who are just starting to engage in spot painting.

Master - class ... see below

I ... picked up stencils for YOU - templates ... and a little information and photos ...

Black and white templates - someone uses it as coloring books for children, someone as material for hand-made ... But in fact, it is used in scrapbooking and is called DIGISTAMPS. What it is? These are images that could be stamps, but not everyone has the opportunity to have such stamps (specific or in a large assortment), so they are simply printed on a printer and used. Thus, you have the opportunity to decorate your postcard or other work.

Perhaps for YOU this is just a dotted set ... for me it is much of a lot ... including Romanian and decks ... and art ... it all depends on imagination and knowledge ...

★☆★☆★
←Ƹ̴Ӂ̴Ʒ →★☆★☆★
★☆★☆★←Ƹ̴Ӂ̴Ʒ →★☆★☆★

★☆★☆★←Ƹ̴Ӂ̴Ʒ →★☆★☆★

★☆★☆★←Ƹ̴Ӂ̴Ʒ →★☆★☆★

★☆★☆★←Ƹ̴Ӂ̴Ʒ →★☆★☆★

Dear needlewomen, craftswomen of spot painting, if the area of small items - bottles, caskets, notebooks has become cramped for you, I suggest trying to apply your skills on large surfaces: decorative panels using technology Point-to-Point will be able to raise the cost of your home :-)

★☆★☆★←Ƹ̴Ӂ̴Ʒ →★☆★☆★
Master - classes

These contours have thin noses and this is very important. In a set of 6 colors.

But the set does not include Copper. I buy it separately.

Other paints in the set are usually sold separately as well.
And also, in some works, I use Gamma paints - Copper with sparkles and Gold with sparkles. The spouts there are quite thick, but they are suitable for these colors.

I know that there are contours for glass and ceramics from PEBEO and IDEA, but they are not found in our area and I can not say anything about them ...

The first thing to do is to prepare the surface to be painted - wash it with dishwashing detergent, dry it and degrease it with alcohol or vodka. Do not take away vodka in the future - there is no way for a creative person without vodka!))) - in the process of work, handprints will remain on the glass, and so we will remove them with a swab soaked in vodka. If the glass is poorly degreased, the paint may not adhere well.

You can practice on a regular glass, which is not a pity))

We learn to put points by lightly pressing on the tube. We try to ensure that not only the points are the same size, but also the distance between them

It turns out? Now we try to put small dots

Now we are trying to draw a curved line.

That, in general, is all the wisdom! It remains only to fill your hand. Drawing stripes is boring, so I suggest drawing a floral pattern

Please note that you need to alternate points of different sizes - then the drawing will not look monotonous. And we continue

And I do some work on primed glass. Stained glass paint serves as a primer. And then the finished work might look like this

.............

First of all, I would like to address this master class to beginners in the point-to-point technique, and to everyone who is interested in this technique.
As a basis, I took a generalized oriental motive, in which there is a heart shape as a symbol of life, a traditional hexagonal star and droplets - a symbol of purity. I never learned how to draw, so I took the basis for the plate from the Internet (unfortunately I don't know the author of this ornament) This is the basis

The main thing is to always remember that we do not just want to copy a drawing, but we need a base, which we will already fill with paints and soul.
Preparing the plate for work. To begin with, we degrease and dry it well.
In order to transfer the drawing to the plate, I used my favorite carbon copy method. She fixed the carbon copy with the drawing with clerical clips and began to trace the drawing along the contour. I do this with a pen so that I can see for sure what is already circled and what is not.

After removing the carbon copy, we get faint black lines on the plate. The main thing is to be vigilant - the carbon print is not durable, so you do not need to rub it hard with your hands, otherwise it is very well erased. The minus of this trace is dirt on the hand, so you can put a napkin under your hand when working

When drawing in the point-to-point technique, the most important thing in my opinion is the firmness of the hands. Because I am right-handed, then in my case the position of the hands is as follows. Both elbows of the hands are on the table. The left hand is under the bottom of the plate, which allows you to scroll it, when drawing a pattern, without touching the pattern itself. The right hand holds the contour, approximately at an angle of 45 degrees to the surface of the cymbal, plus palm rest against the very edge of the cymbal for added stability.

Before putting a dot on the outline, I advise you to take a napkin and try to put a dot on it. So you can understand the density of the contour, whether the spout is clogged and at the same time, if you accidentally pressed hard on the contour and got a bold point - save the plate. If everything suits you, we begin to apply the drawing from the center. Everything is simple here, it is more difficult to lubricate the drawing in the center with your hand than if it is at the edges.

Is a special kind of drawing when a drawing is created from points. The dots are collected in shapes and lines, and as a result, everything looks very interesting - like beaded weaving or rhinestones pasted on a pattern.

A bit of history

Dot patterns look very nice. And that's why people guessed to draw with dots in several places of the world at once. However, historians believe that the earliest invented dot patterns were the Australian aborigines - the oldest samples were found in Australia, and these samples are about 40,000 years old! Nevertheless, dot painting is also known in other parts of the world - in China and India, in Indonesia and Africa, in Persia and Thailand.

Since the discovery of the Green Continent, Australian murals have been of great interest to European art critics and artists. Therefore, there was a place for dots in serious painting. J.-P. Seurat, P. Signac, L. and C. Pizarro.

Naturally, dots were also used by European peoples in traditional crafts. But we will not touch on them - after all, there it is just an element.

Spot painting for beginners: I want it too!

Spot painting is no more difficult than beading or embroidery. At first glance, it seems that you will never succeed, that this is a very long and painstaking work, but this is not so. Try it with a pencil first - you will see that the surface closes with dot patterns pretty quickly. But a pencil is not a dot painting yet. Other materials are needed here.

Spot painting for beginners is not too burdensome, because no terribly expensive tools and materials are required. And what you need?

Any workpiece with a flat surface - for example, wood, ceramic, glass, plastic.
Quite thick paint - for a start, you can take any acrylic, but if you want, you can buy special paints for spot painting, called "contour".
Sharpened stick, hard pencil, old non-writing marker for applying paint.
A bottle of acetone or any alcohol-based liquid for surface degreasing (even the same cologne or cheap nail polish remover).
And, of course, a prepared workplace - comfortable, with good light.

Spot painting technique or "where to start?"

The spot painting technique is the same for all styles. And there are also many painting styles. We will start, perhaps, with what may be closer to most of our needlewomen: mosaic dots.

What mosaic dots? This is a drawing, in other words, made in cells. Only instead of a cell, a dot. Do you remember where you saw this? Yes, these are patterns for cross stitching and jacquard patterns.

Another way is radial ornaments, that is, those in which the drawing goes from the center or several centers, being located around the rays. By the way, for this you can even use a crochet napkin pattern or for weaving lace.

And there is more free way when you just draw all kinds of shapes with dots. It's up to you to decide whether to use a template or create on a whim.

But back to our samples. To begin with, we will choose a simple drawing, in which only one color is involved - and one paint. In addition to paint, we need:

cotton swabs and discs;
acetone or nail polish remover;
darning needle (pencil, felt-tip pen);
stencil paper;
sample paper;
wallpaper knife or blade;
masking tape or paper clips;
a sheet of watercolor paper or cardboard (for the timid);
glass jar (for the decisive).

We will conduct the first master class on a piece of watercolor paper - it's easier this way, and if it doesn't work out, then it's not a pity to throw it away. And if you want, you can try it on a glass jar. But if it turns out well, it will be nice.

You do not need to degrease the paper, but if you suddenly decide to take a chance and paint a glass jar, then treat its entire surface with acetone using a cotton pad.

Prepare a scheme for painting. You can come up with it yourself, or you can find something simple and cute in your storerooms. From the scheme you need to make a stencil for painting. To do this, you need to transfer the picture to thick paper, and then cut it with a blade or a wallpaper knife along the contour.

Take a piece of heavy paper and practice making dots with a needle or pencil. The points must be neat and consistent. If you immediately use contour paint, no additional devices are needed, their role is played by the nozzle of the tube in the form of a cone. To keep the points round, you need to place the tool vertically, as close to the ideal vertical as possible, or with a slight slope. The greater the slope, the more likely it is that the dots will be oval or smeared into a comma.

To keep the points the same, you need to periodically clean the instrument. Moreover, when using a paint-contour, you also need to press on the tube with the same force. But try it - you will see that only skill is needed here, nothing more.

So, fix the template on the surface to be painted with masking tape (if you have a jar) or paper clips (if a sheet of cardboard). Gently draw dots along the contour of each element of the picture, trying to keep them evenly spaced. We start with large elements and end with small ones.

If the drawing suggests, the points can be of different sizes. For example, the contours of a large leaf can be made with large dots, and inside the leaf can be filled with an ornament of small dots. Uniformity and round size is what matters.