Knauf Fugenfüller or Knauf-Fugen - gypsum plaster for all rooms. Knauf fugen putty (25kg) Certificate knauf fugenfüller hydro putty mixture

Fugenfüller - what is it? This is a dry gypsum putty from the world-famous manufacturer Knauf, and this is an old but well-established name, today it is called Knauf-Fugen, packaged in paper ten and twenty five kilogram (10 kg and 25 kg) bags. Putty, in the line of the catalog, occupies an honorable leadership position and is famous for the fact that it does not crack, does not shrink, and is safe for people, because made of environmentally friendly natural materials according to the most demanding German standards, with a certificate of conformity, produced in Russia.

Application of Knauf Fugenfüller putty

At its core, the putty contains gypsum, and Knauf-Fugenfüller GV with various polymeric and hydrophobic additives, which in tandem with a reinforcing tape is used for sealing joints, has a wide range of applications:

• between drywall sheets, in other words, at the junction of gypsum board with thinned edges;

• puttying of defects and cracks on drywall sheets;

• to glue drywall sheets and combined panels to a flat surface, in other words, due to its properties, the building material serves as a substitute for assembly glue;

• for precast concrete elements, irregularities or seams can be repaired;

• for leveling the base, any surface of the walls immediately before painting;

• for filling and gluing other plaster elements together.

Surface preparation for work

First, it is necessary to mount the gypsum board on the required base or on a supporting frame, and then prepare a seam for putty. The place that you will putty must be cleaned of dust, and also pay attention to the fact that it must be dry.

Instructions on how to properly dilute Fugenfüller putty

We need a clean container in which we will dilute the dry putty. Pour clean and cold water into the selected container. Then, pour dry putty into it.

Pay attention, it is necessary to fall asleep evenly, and not to "plump" everything in one lump!

We fill in the putties so that we get dry "slides", as soon as they are noticed, we leave them literally for two or three minutes for the so-called "aging". And then, using a spatula, mix until a uniform consistency is formed, akin to sour cream. Due to foaming, it is necessary to dilute only manually, mechanical mixing is permissible only at low speeds and very carefully.

Average ready mix consumption rate or Knauf Fugenfuller specifications

On average, use a consumption at the rate of 250g of dry putty for sealing joints about 1m2 of gypsum board.

Work technology using Fugenfüller putty

Initially, you should be guided by the fact that the time period between the dilution of the dry putty in water and the start of setting is about half an hour. It is not possible to find out exactly how much the finished putty dries, the drying time depends on the application layer and other nuances.

At the same time, the use of a dirty container or a spatula significantly reduces this time.

Work with the cultivation and application of the material on the surface must be carried out in a room while maintaining the same temperature regime (at least + 10˚С), in no case do not allow drafts or other damp-heat effects. If you assume self-leveling or asphalt floors in the room, then work with putty after laying the floor.

The technique of working with Knauf Fugenfuller gypsum putty involves the following sequence of actions:

1. apply the first layer of putty;
2. on top of the applied layer we lay a special tape for seams, which we press in using a spatula;
3. over the hardened and dry bottom layer, apply the next, leveling layer of the putty mixture.

After everything is completely dry, but irregularities are found, they should be removed with a grinding tool. Upon completion of the work, the tools used and the container can be washed with plain clean water.

For more information on mixing and application technology, see a short tutorial video:

The advantages of Knauf-Fugen among other similar materials:

• High adhesion and protection of expensive repairs

After application, the Fugenfüller gypsum building mixture becomes practically part of the wall or drywall sheets, thereby ensuring that the paint does not peel off or any cracks occur. Accordingly, the long service life of costly repairs is easily ensured.

• Getting a flat surface and proper lines

Of course, it depends on the professional skills of the master when applying the mixture, however, absolutely flat walls and screeds are provided for you.

• Best value for money

After applying the putty, there is no need for additional primer before painting, thus it is also a finishing putty, which makes it quite economical in cost, unlike competitors. Another way to save money is the longevity of the material and ease of use. The average price of a 25 kg bag of dry mix is ​​in the region of 370-400 rubles.

• Universal gypsum moisture resistant putty Knauf-Fugen-hydro is specially designed for sealing the joints of moisture resistant Knauf sheets (GKLV)

• No cracks and shrinkage

• Has received commendable reviews from customers over the years

• Safety for others.

Proper storage of Knauf-Fugen

Fugenfüller dry putty in bags is stored for up to six months, if the bag is damaged, it must be used first. Be sure to store in a dry place on wooden pallets.

What to look for before buying

A set of simple but effective information will help you buy a good and proper quality building material in order to avoid disappointment and blame the product or manufacturer:

• Purchase dry putty mixture only in specialized stores, where the rules for storing and transporting material are observed, which will significantly help protect yourself from acquiring a fake.

• Please check before buying integrity of packaging.

• pay attention to bag color, it should be free of any streaks, stains from dried liquid, etc.

• Check the softness of the inner filling by touch. Naturally, it will not be soft, but it is quite possible to "feel" the absence of lumps. If, however, you groped for "seals" it is better to refuse such a bag, tk. possibly incorrect storage or transportation.

• pay attention to expiry date on packaging, it should not exceed 6 months from the date of manufacture. Ideally, it is advisable to use a 2-3 month old mixture.

The appearance of the product may differ from that shown in the photo.

Description

Dry mix, plaster-based putty, with the addition of polymer additives, gray.

Scope of application: The putty is specially designed for sealing gypsum plasterboard joints, sealing cracks and other possible damage to gypsum boards, filling concrete and plastered surfaces, filling joints of prefabricated concrete elements and gypsum tongue-and-groove plates, gluing gypsum plasterboards, gluing and filling gypsum elements.

Specifications: the recommended layer of application is from 1 to 3 mm. Dry mix consumption per 1 sq. m with a layer of 1 mm averages 0.8 kg. The pot life of the solution is 30 minutes. It is recommended to carry out puttying at a substrate temperature of + 10 ° C to + 25 ° C.

Substrate preparation: clean the surface of dirt and dust, remove anything that could impair the adhesion of the material to the base. Treat the base with a primer. If drywall sheets are the base, make sure that they are firmly mounted.

Solution preparation: pour the mixture into a container with clean water, mix thoroughly until a homogeneous mass is obtained, wait 5 minutes, mix again.

Package: bags of 25 kg.

Storage:The guaranteed shelf life in a dry room is 6 months from the date of manufacture (provided that the original packaging is preserved).

Knauf Fugen gypsum putty (gray - 25 kg) - characteristics, application features

Description

A multipurpose surface putty based on gypsum with admixtures of polymer components. The knauf fugen mixture has a gray tint, which absolutely does not affect the technical and operational characteristics of the material. It is possible to use natural dyes, thanks to which the dry mixture will acquire the required shade.

Scope of use

Fugenfüller dry putty has a wide range of applications, namely:

• traditionally used for leveling planes (concrete, plastered);
• sealing seams between drywall sheets with the direct use of reinforcing tape;
• elimination of defects and damages on the surfaces of walls and ceilings;
• the knauf fugen mixture can also be used to glue drywall sheets;
• fasteners for other plaster decorative elements;
• as a means for thin-layer puttying of planes;
• for fastening protective corners made of metal.

A feature of Knauf Fugenfüller is high speed drying of the finished composition. This indicates that the mixing of the mixture must be carried out in small portions. Within 20-30 minutes, the prepared mixture hardens and becomes unsuitable for further use. It is worth noting that Knauf Fugen putty should be kneaded in a perfectly clean container with cleaned tools, since the ingress of contaminants into the composition greatly accelerates the hardening process of the finished solution.

Kneading method

Fugenfüller gv putty is diluted with plain water. Moreover, in a container with a liquid, it is necessary to add a dry mixture in small portions, evenly distributing the powder on the surface of the water. It is advisable to knead by hand, without using a mixer or other construction equipment. The amount of the poured dry mix should slightly exceed the level of the poured liquid in the container.

As you fall asleep, Knauf Finish putty gradually swells. In just a few minutes, the solution begins to thicken. In the case of a steep mix, you can add the right amount of liquid, bringing the composition to the desired consistency.

Application process

Before starting work on the plaster, it is important to clean the surface of dust, dirt and other debris, thereby improving the adhesion of the solution. The wall must be treated with a soil mixture. Carrying out work involving the use of such a building material as knauf finishing putty should be carried out in a room with an air temperature of at least + 100C. Walls should be putty only after finishing work on laying the self-leveling floor. In the work, you should use a special spatula of the right size. Moreover, it is necessary to putty not only the joints of the drywall sheets, but also the places where screws and other fasteners are screwed in.

After the solution has completely dried, the surface must be sanded. This will minimize the presence of roughness and unevenness.

Storage conditions and packaging

The optimal weight of a bag of a mixture of Knauf Fugen putty is 25 kg. It is necessary to store the material in a dry, ventilated room for no more than six months. In this case, the integrity of the packaging should not be violated. |

• The price can be discussed
• Delivery of volume from the truck - free
• Stock item or fast delivery from factory
• Account in 5 minutes

Universal gypsum putty Knauf Fugen (25 kg) - dry putty mixture based on gypsum with polymer additives. Buy Knauf Fugen 25 kg, easy. It is enough to call our managers on the multichannel phone or place an order from the website. We will promptly advise on technical specifications Knauf Fugen gypsum putty 25 kg, we will tell you how to use it correctly.

Application: Universal gypsum putty Knauf-Fugen is intended for sealing joints of gypsum plasterboard Knauf sheets (GKL) with a thinned and semicircular thinned edge, using a reinforcing tape; sealing cracks and other possible damage to KNAUF gypsum boards (GKL); thin layer puttying of flat concrete and plastered surfaces; filling joints of precast concrete elements; installation and sealing of joints of gypsum tongue-and-groove plates; gluing plasterboard sheets and combined panels to a flat surface; gluing and filling plaster elements; for interior work.

Advantages: Knauf-Fugen gypsum putty is specially designed for sealing joints of Knauf gypsum boards (GKL). The solution does not crack when dry. The material is made of environmentally friendly natural mineral (gypsum) and does not contain substances harmful to human health.

Recommendations: After the putty has hardened and dried, remove any unevenness with a sanding tool (floats with a sanding mesh). For high-quality painting, a layer of finishing putty should be applied to the putty surface, for example, Knauf-Rotband Finish, Knauf-Rotband Pasta Profi. Before applying a decorative coating (paint, wallpaper, decorative plaster), treat the putty surface with a Knauf-Tiefengrund primer. When facing ceramic tiles areas of the surface of Knauf sheets on which water gets into, the application of KNAUF-Flähendicht waterproofing is required. All tools and containers used in the process of work must be made of stainless materials. After finishing work, equipment and tools should be rinsed with water immediately.

Knauf Fugen gypsum putty (25 kg) is packed in 25 kg paper bags. Store the bags in a dry place on wooden pallets. Use material from damaged bags first. Shelf life in undamaged packaging is 6 months from the date of manufacture. The date of manufacture is indicated on the side of the bag. After the expiry of the storage period, the packaging and the product must be disposed of as household waste.