Fix Price Kite Sport & Fun. How to assemble a kite from Auchan instructions. Fix Price Kite Sport & Fun How to assemble a flying kite from a fixed price

The Chinese have long believed that a kite soaring in the sky carries away all diseases, adversity and anxiety. In addition, flying a kite is always a spectacular and rather simple activity. The main thing is to choose the right place and take into account some of the nuances.

What child does not dream of flying a bright kite? What could be stronger than the delight with which children watch a toy floating in the sky? "Daddy, let's make a snake!" - says the beloved child. And the father, in response, worriedly scratches the top of his head, since assembling the kite and launching it seems to be something especially difficult. But that's not the case at all.

Theoretical minimum

Before flying a kite, you need to familiarize yourself with the basic concepts:

A leer is a thread with which a flying toy is controlled;

The bridle is a strong thread woven together, thanks to which the kite is attached to the rail;

Bearing area - the size of the projection of the kite on a horizontal surface;

The bearing capacity is lift one unit of bearing area;

The center of pressure is the center of the bearing area.

How to make a toy fly?

How to make a kite to float? To do this, its surface should not be flat, but bend upward under the pressure of the air flow. That is why it is not recommended to pull the material (paper, oilcloth, fabric) too tight when making a snake. Sometimes it is enough to fix only the corners. The center of gravity should be shifted to the tail, otherwise long hover cannot be achieved.

The leading edge of the kite must be carefully glued or reinforced to avoid twists. For those who do not yet know how to fly a kite, it is better to give preference to flying dummies that have a long tail - it gives the correct balance to the entire structure.

Another important element is the bridle, which should consist of two strands. But such a snake is quite difficult to control, so it is better for beginners to use a triple bridle.

Home workshop - manufacturing steps

1. To assemble the simplest type of kite, you need to take two thin pine, bamboo or plastic slats 30 and 50 cm long. Measure 15 cm from the end of the longer slat and attach a small slat at a right angle using strong threads. Thus, a cross for a flying toy is obtained.

2. At the ends of the strips, you need to make round notches into which a thin strong thread is pulled. You should get a quadrangular frame.

3. Then you need to take thin paper or oilcloth and cover the existing workpiece. To do this, the resulting frame is placed on a sheet of prepared material and outlined with a pencil or marker, adding a small distance to the allowances for fastening.

4. The pattern is cut out, after which the frame is thoroughly greased with glue and attached to the material. You can decorate the kite with felt-tip pens, drawing cartoon characters on it (which will delight your children), or depict the slender legs of your beloved woman on it (which will delight you).

5. Now you can start attaching the bridle. For this, a spool of fishing line is taken, which is attached to the left corner of the workpiece. Then you need to stretch it to the snake's nose, and from there to the right corner to determine the length of the bridle. Cut off the thread and attach the tip to the right corner of the snake (it turns out a long thread from one edge to the other). Now we take the spool again, fix the fishing line in the bow of the structure, measure the distance to the left corner of the kite, add another ten centimeters, cut it off and tie it to the middle of the first thread.

6. The tail of a kite can be made from a thin cord or strong nylon thread, measuring 3.5-4 meters. The tail can be decorated with paper bows.

7. Launching a kite is impossible without a leash. To do this, a long strong thread is attached to the bridle, at the end of which you can tie a small stick for ease of control.

Flat flying designs

Such kites are the simplest and most famous. The frame is made of pine or any other light wood. The cladding is made of film or paper. The paper does not provide stability to the structure, so it must be strong (mica, tissue or rice). If a film is used, then it should not stretch well, but at the same time adhere well to the frame (it is best to buy acrylic).

What does a serpent monk look like?

This flying model got its name due to its similarity with the hood of a monastic robe. Such a kite is perfectly centered, so a two-lead bridle is enough to launch it. The tail is used as a balancer, it should be light and thin. It is better to choose a dense material for such a kite, because under gusts of wind it crumples and falls too easily.

Bow flying structure

This is one of the varieties of the flat kite. The frame is constructed from a pair of slats for lightness. In this case, the front rail gives rigidity to the entire structure, but there is a great sensitivity to the wind. It is not always possible for beginners to master the launch of this type of kite the first time.

Box-shaped construction

This kind of homemade snake looks pretty solid, but it's easy to do. He doesn't need a tail. Moreover, such snakes can lift small loads, so that a small digital camera can be placed in them, having previously turned it on for video recording or burst shooting. Thus, you can get completely unique footage from a bird's eye view. But the box-shaped structure keeps well in the air only in strong winds.

How to fly a kite: choosing a place

So that nothing interferes with the flight process, you should choose open areas without any obstacles. Trees, kiosks, buildings located nearby interfere with the direct passage of air currents and create unnecessary turbulence. The sea coast with its breeze is perfect (unless, of course, you have to jump over the bodies of the tourists). It is best to stay away from highways, airfields and power lines.

How to fly a kite (instruction)

First, you need to determine the direction of the wind, just slobbering your finger. Now the kite is solemnly awarded to a friend (girlfriend, child, wife). You need to stand in front of your assistant, who must hold the snake above his head, perpendicular to the ground. The wind should blow at your back, the reel with the line should be in your hands.

So how to fly a kite? To begin with, you need to slowly move away from a friend at a distance of about 20 meters, while unwinding the leash. Having given the command: "Let go!", Sharply pull the rail towards you. With good wind strength, the kite itself will soar in the air, and all that remains is to enthusiastically watch its flight. Otherwise, you will have to run around the field a little more until the structure catches the air flow.

How to fly a kite correctly with different wind strengths? If it flies only when the person controlling it is running, then the wind is too weak. With fairly strong air currents, the flying structure hovers easily in the air, and no additional effort is needed. The optimal wind speed for launching a paper model should be 3-6 m / s.

If the tension of the leash thread is too strong, then it should be unwound a little. If the wind dies down, then the snake is pulled to itself. In order to return the structure to the ground, it is necessary to gradually rewind the rail and go home with a sense of accomplishment.

(http://nepoceda.com/kak-sobrat-vozdushnogo-zmeya)

The main elements of the snake

Frame - depending on the model, it can consist of two or more rails. The relative position of which depends on the specific model. Serves for structural rigidity during flight.

Canvases - lightweight fabric, cellophane or paper, which will cover the snake frame. This creates an obstacle for the wind that creates a lifting force. The canvas is positioned in relation to the wind in front of the frame.

Tail - usually made in the form of ribbons, one or more, and even with bows. Serves not only as a decoration, but also to smooth out imperfections during the flight. The tail is not found on all models.

Bridle - for attaching a string (rope) to the kite. They are of several types, depending on the number of attachment points:

with one - does not require adjustment, the tail does all the work

with two or more - there is usually an adjusting piece (ring) to adjust the angle of attack by the wind.

with a keel - an integral part connected to a canvas of the same material, instead of a bridle with two fastening points. Does not require adjustment, usually a tail is hung for this purpose

Leer (thread, rope) - with its help, they control the flight. It should be light and strong, preferably with the ability to detach from the snake. For this purpose, they put carbines for the tail, by the way, too.

Spool - for winding thread (rail). Facilitates handling and less risk of tangling the rope.

Let's consider the possible options:

1. If you have a rail (twig) and bridle, coil, tail in the kit.

Take the snake frame, insert the bridle from the front into the holes on the snake. (for an example, see the picture above) - Turn the snake over and insert the rail into the holes (loops) at the ends of the bridle. - Next, find the special grooves for the serpentine rail. They (grooves for the rail) should be located at the edges either top-bottom or left-right. I draw your attention to the fact that the rail should be on the back of the kite, i.e. behind the canvas during the flight. - We turn over to ourselves with the face of the kite and tie a thread to the bridle. - If there is also a tail, find a hole at the bottom of the kite and secure the tail.

2. If there is no rail but there is a bridle, a spool of thread, a tail is not an obligatory attribute. - Then just look for holes on the snake and fix it (bridle). - Next, attach the thread to the bridle. The thread fastening to the bridle should be on the front side. - We fasten the tail, if it goes separately. It may not exist at all.

3. It is possible that the kit will contain only one spool of thread without a bridle, but with a rail and a tail. Your keel model is a one-piece piece attached to the snake's main canvas. - There should be a hole in the keel for tying the thread, or some other device - a carbine, etc. For clarity, consider an example. in our case, it is necessary to thread the thread into the hole on the keel. We fasten the thread by tying a knot. - On the reverse side, turning the kite over, insert the rail. As described above, the rail is inserted into the spec. grooves along the edges of the kite (bottom-top, right-left, or, if there are two slats, both). - Such models are also equipped with a tail, which also goes separately and attach it, there should be holes below for attaching the tail. in our case it is a metal hook with a loop.

4. For models with two rails or more, the assembly principle is similar. Depending on the number of additional rails included. They are inserted into the grooves on the snake. The location may vary. How to be perpendicular to each other, intersect, be parallel.

Kites originated in ancient China in the 2nd century AD. People have learned to design various original types of kites: simple and controllable, flat and voluminous, with or without a frame, in the form of a dragon, a wing, a heart, a parachute. Today kites are used not only as toys for children, but also for sports competitions and other useful purposes. The article contains master classes on creating do-it-yourself kites.

From the package

Materials and tools:

• cellophane bags - 4 pieces;
• thin light sticks (reed, pine slats);
• thick fishing line;
• permanent marker;
• Scotch;
• roulette;
• scissors;
• Super glue.

Master Class:

Bird

Materials and tools:

• bamboo, carbon or reed rods with a diameter of 3 millimeters;
• plastic bag;
• spool of thick thread;
• Super glue;
• Scotch.

Master Class:

• According to the scheme, cut the film and sticks.
• Fasten all the twigs according to the pattern with each other with thick threads and fill with glue for strength.
• Attach the resulting frame to the film and connect them with tape.
• Tie a leer to the finished snake.

Sports

Materials and tools:

• linden, bamboo or pine sticks with a diameter of 10 millimeters;
• polyethylene film;
• a spool of durable thread;
• Super glue;
• Scotch;
• fishing line.

Master Class:

1. Following the scheme, prepare the film cuts and cut the required number of sticks.
2. Tie the sticks together with fishing line and fill with glue for strength.
3. Pull a string of fishing line between the two wings of the serpent.
4. Use adhesive tape to attach the film to the frame.
5. Use a thick thread for the tail, line and bridle.

Serpent monk

Materials and tools:

• a sheet of thick paper 20 by 20 centimeters;
• thick thread with a spool;
• cotton tape;
• threads with a needle;
• iron;
• scissors.

Master Class:

1. According to scheme 1 in the picture, bend the sheet in the middle, connecting points B and D, and iron the fold well (scheme 2).
2. Without straightening the sheet, bend corner B so that the sides of the AC and BC are aligned.
3. Turn the sheet over, bend the corner D, aligning the AC and DC sides (diagram 3).
4. Peel back corners with vertices B and D.
5. Fold sides EB and E * D together with side AE ​​and AE *.
6. Iron the folds with an iron and gently unfold the product.
7. According to scheme 6, make holes on the wings at points F, F * and C (tail).
8. Tie a thread with a length equal to half the height of the AK (image 6 in scheme 1) through points F and F * (ties).
9. At point C, attach a tail made of cotton fabric 2 centimeters wide and 5xAC long. To do this, you need to thread a segment through the hole, attach it to the main tail and stitch it (diagram 2).
10. Exactly in the middle of the tie, tie a rope of thick thread with a spool.

Flat

Materials and tools:

• willow, bamboo or reed branches;
• cellophane film or thick paper;
• cotton tape 2 centimeters wide;
• thread;
• joiner's glue.

Master Class:

Potter's Volumetric Rhomboid Box Snake

Materials and tools:

• 4 slats with a length of 1060 millimeters and a section of 10 by 10 millimeters (spars);
• 2 slats with a length of 990 millimeters and a section of 8 by 8 millimeters (spacer);
• 2 slats with a length of 660 mm and a section of 8 by 8 mm (small spacers);
• cloth or thick paper;
• thick threads;
• scissors;
• drying oil;
• joiner's glue.

Master Class:

Kite sail

Materials and tools:

• film or thin fabric;
• pine slats 75 centimeters long and 6 millimeters in diameter;
• thick threads;
• Scotch;
• scissors;
• ruler.

Master Class:

Indian rhombic

Materials and tools:

• film or thin fabric;
• pine lath 56 centimeters long, 2 millimeters in diameter;
• pine lath 82.5 centimeters long, 2 millimeters in diameter;
• 2 pine slats 10 centimeters each, 2 millimeters in diameter;
• strong threads 80 centimeters long;
• Scotch;
• fabric tape.

Master Class:

Who in childhood did not fly a kite! For many of us, it was a favorite pastime to make with my own hands was not difficult at all. We made the simplest paper kites and rejoiced at how our creations flew in the wind. Now in stores you can find a variety of models of kites, from small children's kites to huge professional ones. And now we, having already become parents ourselves, are going with interest to the sports department to buy this bright toy for our children. Let's remember together how to assemble a kite, and in what ways it can be raised into the sky.

Assembling the kite

Regardless of the difficulty level, all kites consist of a standard set of components. The most important thing in any kite is a strong frame that holds the shape of the structure during flight. It can be made of two or more slats. A canvas made of lightweight material is stretched over the frame, which creates an obstacle to the wind and allows the kite to float in the air. It is important to know that when launching the kite must be positioned in such a way that the canvas is in front of the frame, and the wind hits it. In some models of kites, a tail made in the form of beautiful ribbons is attached to the canvas, which is designed to smooth out gusts of wind and stabilize the kite in the air.

The kite is controlled from the ground using a rope or thread, which is also called a rope. It should be very strong, but light enough not to interfere with flight.

The thread is wound on a special convenient reel. Often times, kite makers make rails with carabiners so people can unhook them. The junction of the thread with the kite is called the bridle. Depending on the number of attachment points, this can be:

• bridle with one attachment, which does not require adjustment in the air. The kite is only corrected by the tail.
• a bridle with a keel, made in the form of a single piece from a cloth of the same material. Also does not require adjustment during flight
• a bridle with two or more attachments, which assumes control of the kite. To do this, it has a ring that allows you to adjust the flight angle.

How to fly a kite

It is easy to fly a kite, the main thing is to choose a suitable place and catch the wind. To do this, we find a large open area of ​​land, preferably on a hill, where the air currents move from bottom to top. If you are surrounded by trees and houses, it will be more difficult for the snake to climb due to the uneven wind, and it can only stabilize at an altitude of about 50 meters.

Important to remember:

• Under no circumstances should you fly a kite under power lines, near highways and airports, or during a storm with thunder and lightning. Even if the place seems to you perfectly flat and spacious, and the wind in a thunderstorm is just ideal for launching a kite, such games can be life-threatening.
• Never fly heavy kites over people or animals. If you do not cope with the control, this whole structure with a rigid frame at high speed can fly at a person and cripple him. If you want to play with children on the beach by the sea, a light paper kite is suitable for this, which does not harm anyone.
• Use sunglasses when flying the kite in sunny weather. Carried away by the game and gazing intently at the sky, you may not notice how the bright sun will harm your eyes.
• Be sure to protect your hands. Use gloves and a reel. Never wrap the rope around your hands. A strong gust of wind can lift the snake up, and the quickly unwinding thread will burn your skin.

Before sending our kite into the sky, we place it facing us, stand with our back to the wind and pull the threads. The launch of a kite is highly dependent on wind speed. If the wind is strong enough, you can launch the kite directly from your hands by placing it with its nose in the wind and slowly unwinding the rope. If the wind is not very strong, you may need help. Spin the bobbin about 15-20 meters, pull the thread, and have someone toss the snake up. It so happens that the wind is weak near the ground, but strong enough at the top. This is evidenced by the swaying treetops. In this case, the kite will only fly at a certain height. But in order to raise it to this height, you will have to run a little against the wind.

If you are not yet familiar with the Fix Price store and its assortment, then it's time to do it! And it's worth starting with our review - 20 best toys for children.

The best toys from the Fix Price store

This is a device for storing and accumulating coins, made in the form of a car. The size is small. A wonderful souvenir for a boy.

Product price: 55 rub.

Made of wood and polyester. Designed for children from 10 years old who love to assemble structures.

The size of the boat is 10 cm.

Product price: 50 rubles.

Boat with an inflatable bottom. It is started mechanically, works on water. Any kid will be pleased with such a gift.

Product price: 55 rub.

With it, children will be able to create and create whatever they want.

Product price: 50 rubles.

Amazing figurine with movable joints. Aurora can not only move, but even dance!

Product price: 99 rub.

It will appeal to kids who are attracted by something unusual.

Literally flies around the room.

Product price: 50 rubles.

Makes a pleasant sound. It will be interesting for young children.

Product price: 50 rubles.

What could be more enjoyable than taking a fun train journey?

Product price: 99 rub.

Dreaming of a device to help your child's legs develop? Then a ball pool will be the best option.

Product price: 199 rub.

One touch is enough and it flies, and also glows at the same time.

A good gift for children of all ages.

Product price: 199 rub.

Suitable for those who like to play "shops". Young "sellers" and "buyers" will appreciate such a gift.

Product price: 199 rub.

Perfect for boys who like to play shooters and war games. Now there are no bullets and other small elements that worried parents.

Product price: 199 rub.

Designed for medium sized dolls. An irreplaceable thing for playing mother and daughter. Any girl will be crazy about such a gift.

Product price: 199 rub.

Not sure how to entertain your kids on vacation? The water gun will help to cheer up any child. It is harmless and not dangerous, so it can be used anywhere.

Product price: 199 rub.

A perfect gift for toddlers who are just starting to react to sounds. Great to distract a crying baby.

Produces a melodic sound, which creates a favorable atmosphere.

Product price: 199 rub.

The toy can float, glows underwater. Will be a good gift for kids. They will have something to do while swimming.

Product price: 99 rub.

Good day to all!

Most recently I read the author's review with irecommend about a kite with Aliexpress and I really wanted to launch one with a child, since in my childhood there was no such fun. And literally a couple of days later they saw retail a kite in the Fix Price store in St. Petersburg, without hesitation purchased.

I must say right away that to launch a kite you need a wind outside... In the calm, there is even no point in going out with him for a walk.

It is not recommended to fly kites in strong, gusty winds.

Name of product:

Kite Sport & Fun from the store Fix Price

the size 135 * 65cm; rope length 30 meters

Price - 99 rubles

Manufacturer country: China

Design options: in the Fix Price store in St. Petersburg I saw lion, bird, plane and dolphin. My daughter liked the lion more.

Composition: dacron (190T), fiberglass, polypropylene.

In the characteristics of the snake there is no detailed description of how to launch and collect it, but it is written that shelf-life Unlimited... I laughed at this moment, because even after one launch, a hole appeared on the snake (the quality is Chinese and that says it all).

In a rustling transparent bag, the snake looks very much like an umbrella.

And inside is directly canvas snake with tail and frame;

Spool for winding the thread and the thread itself (leer), in this case line.

The reel is made of cheap plastic, but special cuts are made on it so that the line can be fixed and it does not unwind. It's comfortable!

The fishing line is tied to a special hole in the snake's canvas.

And on the other side of the canvas into special plastic grooves ...

Inserted flexible plastic black stick, it is also included.

The serpent is assembled. You can run. This does not require special skills, everything is quite simple.

We go out into the open area (in some field).

Convenient when flying a kite 2 persons, one initially holds it above his head, and then, upon a signal, releases it, the second person unwinds the fishing line and held the kite in the sky, catches and feels the direction of the wind.

There is no need to run with a kite, but my daughter really liked this activity, so he did not fly with her for long.

Since the line is 30 meters, the kite will be able to climb high enough in good wind.

Leo superman in yellow tights caused a storm of positive emotions in a child passing by adults and my husband and I were also very interested in watching him fly over our head.

The Chinese believe that soaring in the sky The kite carries with it all diseases and adversity.