How to stick a protective glass on the phone - Step by step instructions and tips for choosing. How to stick a protective glass on a smartphone Device for sticking protective films on a phone

Hello!
Indeed, as Felicity noted, “on the first try, few succeed.” But what if this “time” is the only one? And is there a great risk of getting poorly glued glass with lakes of air under it? But you can get excellent results the first time. But this requires an understanding of the essence of the process and appropriate equipment of the workplace.
To begin with, I will describe the essence of the process. Since all objects are plastic, even when handling them, they are easily electrified. And while the old film is peeled off, the screen is rubbed with a napkin, the film is removed from the new glass, the surface of the screen and the new glass are electrified and have time to attract microparticles from the air. Microparticles fall from clothes, head hair ... Yes, you never know why! We do not see them with the normal eye. But by gluing glass or film to the screen, they clearly begin to be seen as air bubbles. And it will not work to remove such a bubble, because the microparticle has already “pasted” into the adhesive layer of glass or film. The air would be squeezed out when ironing, but the particle would not. But it also creates some cavity for air.
Therefore, the main requirement is to de-electrify the working volume, to remove electric charges from oneself, from clothes, from glass, from the screen.
For this;
1. Prepare the atomizer. A very convenient bottle (25 - 50 ml.) With a pressure sprayer from under ethyl alcohol (buy at a pharmacy). Fill an empty bottle with half a drop of Farry, preferably distilled water. Read and think about Felicity's addition. Practice spraying thin layers on any object.
2. Choose a table for which you will work. Passing air flows, drafts capable of carrying dust, should not be.
3. Wipe the table surface with a damp cloth with a small amount of Farry. This will remove static from the table surface and remove and bind any remaining dust.
4. Boil the kettle with a spout in advance and place it on the desktop on the electric stove 30-40 centimeters from the working area. So that he gave a trickle of steam passing 40 - 50 centimeters above the table. This steam will remove static from objects in the work area. But don't overdo it. There should be no condensation in the form of rain or showers.
5. Prepare all the accessories on the table.
6. Wash your hands thoroughly and preferably your face with soap a couple of times. When washing your hands, you “ground” yourself through a jet of water (and water conducts electricity) through the water supply system. And wash away microparticles of skin and fat from your face. Sims will not only get clean hands (which is very important), but refresh themselves before work.
7. Perform all the operations described by the author of the article and use the add-on from Felicity. In 12-17 minutes, if you carefully read the article and recommendations, you will get a beautifully glued glass without air inclusions.
Tested many times by svoimirukami!

Content

The screen of any communication gadget needs protection. Even if you have purchased the latest iPhone model, do not neglect the opportunity to install an additional film on the display. This will extend the life of the phone, make it look attractive longer. Such mechanical damage as scratches, bumps will not be terrible if you know how to stick a protective glass on your phone. The task is not easy, but if you follow the instructions, you can do it at home without outside help.

How to stick a protective glass on a smartphone

For a beginner, the procedure may seem complicated, but a few workouts will make you a real expert. It is worth noting that there is no significant difference in whether we glue a protective glass on an iPhone 5, other phone models or a tablet. The procedure remains the same. It is better for an inexperienced person to start from the back of the gadget, and then move on to the screen.

Necessary materials and tools

If you have just purchased a smartphone, then it is important to understand how to stick protective glasses on the phone. The display of the device is very sensitive to mechanical damage. Being just in your pocket, the gadget will be damaged by coins, a fingernail or keys. Even minimal scratches can cause bubbles to form during application. The same goes for situations where you just want to replace your old phone protection.

For the procedure you will need:

alcohol wipe;
dry cloth;
special liquid for cleaning TV or computer screens;
adhesive tape or dust collector;
glass.

Step-by-step instruction

An important point is the preparation of the workplace. Choose a room with a minimum amount of dust. A kitchen or bathroom is best. There is too much textile in the bedroom, which attracts particles to itself. Such a moment prevents the correct process and can complicate the procedure. If you do not know how to stick a protective glass on your phone, follow the steps:

Wash your hands with soap and water, then lay out the equipment, the protective glass for the iPhone 6 or other phone on a clean, smooth surface.
Before starting the procedure, remove the old film from the device. To do this, pull slightly on the edge at a 60 degree angle.
Use an alcohol wipe or cleaning cloth to remove dirt from the phone screen. Such a tool is sold in hardware stores or made independently. To do this, you need to mix 5:1 water and alcohol, add some dish gel there.
We rub the display to a shine. If there are dust particles, then we pass along the surface with adhesive tape or a dust collector.
We take the device out of the package and remove the film from it.
We set the protection so that it matches the central button of the gadget and the speakers.
Swipe down the center from top to bottom to secure the patch surface.
We expel the remaining air from the center to the edges with a credit card or a spatula, which is often included.

Do not press too hard on the screen to remove small air bubbles. They will disappear on their own within a few days after the procedure. As a result, you should get a smooth, perfectly even screen coverage. Although tempered glass on the phone has a thickness of only 0.18 mm, it perfectly protects the device from mechanical damage.

Is it possible to re-glue the protective glass on the phone

High-quality surfaces for iPhone 5s and other gadget models can be reused. To do this, carefully remove the glass and treat the adhesive side with formic alcohol. Gently wipe it with a cloth soaked in such a liquid, and let it drain a little. Then set the protection according to the speaker and the button. With light movements from the center to the edges, expel air and liquid. Small bubbles will disappear on their own in a day.

To protect the screen of your device, you need to know how to stick a protective glass on your phone. It is much stronger, yet flexible.

The film can protect the display only from scratches, and the protective screen also prevents the formation of cracks after the smartphone is dropped.

You should be very careful when buying universal glass, it may be of poor quality.

A few tips for choosing:

There are two types of glass: glossy and matte. The first option is cheaper, however, it can only protect the smartphone display from bumps. Before buying, check the strength of the glass, it should not bend too much;
Matte glasses are more expensive and can protect your phone from bumps, drops, and even glare. The disadvantage of such glass: the color quality of the smartphone display may deteriorate;
Good glass should have an oleophobic coating. It does not allow the coating to get dirty in fat;
It is advisable to buy glass options that include special wipes and spare protective glasses;
The thicker the glass, the higher its strength and the level of protection of the phone during bumps and falls.

glass bonding process

Follow the instructions to stick an additional protective glass on your smartphone:

First of all, clean your workplace. Many glass sticker instructions are silent about this point, however, it is very important to remove all dust from the work surface. It's there even if you can't see it.
Get a clean rag and glass cleaner. Wipe the surface and wait for it to dry. Thus, you will remove the maximum number of dust particles and there will be less chance that they will fall under the protective glass;

Turn off your smartphone for the duration of the entire procedure so that the screen does not turn on during the gluing process;
Take a damp cleaning cloth and carefully wipe the display of your phone with it. You can buy these napkins in the household department of any store. Wipes for cleaning glasses are also suitable.
Then wipe the display with a dry cloth to remove streaks and fingerprints;

Take the protective screen. Peel off the film on it from the side that will be adjacent to the smartphone display;

Now position the glass - without touching , place it over the entire area of the screen. All steps must be done very quickly;

Now carefully place the glass so that it perfectly covers the surface of the phone and release it. The protective glass will stick on its own. If you have cleaned the display surface well, there will be no air or dust.

What to do if air gets in? If you still have air bubbles, go over the surface of the protective glass with a napkin, pressing lightly so that they go beyond.

After gluing, turn on the smartphone and check the operation of the sensor.

Important! Many smartphone owners are wondering: is it possible to re-stick the protective glass if it peels off? Perhaps too much dust or air under the screen prevents it from gaining a foothold. Gently peel it off, wipe the smartphone display and repeat the sticker procedure again. Reinstalling on an already clean surface may solve the problem.

How to remove the protective glass?

Removing the protective glass is much more difficult than the film. If you glued it incorrectly, remove it using the tab located on the outside of the protective screen.

In most cases, the need to remove the protective screen arises after a serious fall. When the screen is broken, the glass must be removed as carefully as possible.

The easiest way is to take a plastic card (for example, a regular bank card) and pry off the edge. Then walk the map under the entire surface of the screen, unpinning it from the device.

Advice! To make the peeling process easier, stick the phone screen in your palms.

Properties

Description

Here you can buy a machine for sticking a film on a Remax device up to 12", a box at a price of 680 rubles with the possibility of ordering installation and repair services. You can pay for the purchase of a machine for sticking a film on Remax devices up to 12", boxes in cash, electronic money , by bank card, by bank account, by cash on delivery or by bank transfer. It is possible to deliver the goods using the services of our courier in Moscow, using a courier company or by Russian post. In addition, a self-delivery point in Moscow is at your service.

1) Delivery by courier in Moscow.Carried out by our own couriers of our online store. To use delivery, you must select this method of receiving your order at checkout. Delivery is carried out, as a rule, on the next business day after placing the order (if there is a free courier, delivery can be carried out the same day).

The cost of delivery in Moscow (within the Moscow Ring Road) is:
319 rubles for goods with a total value of up to 1000 rubles;
279 rubles for goods with a total value of up to 3000 rubles
249 rubles for goods with a total value of 3,000 to 12,000 rubles;

The cost of delivery in Moscow (outside the Moscow Ring Road) is:
350 rubles for goods with a total value of up to 1000 rubles;
300 rubles for goods with a total value of 1,000 to 12,000 rubles;

With the cost of goods from 12,000 rubles, delivery in Moscow is free.

2)Receipt of goods at the company's offices. If you have chosen this method of receiving the goods, after registration, wait for the manager's call to confirm the availability and reserve the goods in stock. You can also reserve goods for pickup by phone.

3)Shipping via courier company. You can order delivery of any of the courier companies presented on the website. Delivery is carried out to the address of the recipient or to the points of issue of courier companies.

The exact terms and cost of delivery depend on the choice of the courier service, the weight and volume characteristics of the order and the remoteness of the delivery point. The calculation of the time and cost of delivery is carried out automatically in the basket when placing an order.

4)Sending by Russian Post. It is carried out according to the index of the post office and the address of the recipient. Poste restante shipments are made only on prepaid basis.

You can pay for your purchase in the following ways:

1) Cash upon receipt at the office of the company or upon courier delivery.
2) Electronic money on the site - Yandex.Money, WebMoney (service operator - Yandex company), Qiwi (by wallet number after agreement with the manager).
3) Bank card on the site (service operator - Yandex company).
4) By bank account (you can pay the bill at the bank or through the client-bank).
5) Cash on delivery when sending to the regions. Payment is made by a courier company or Russian Post. Prepayment is not required.

How to pay for an order for legal entities?

1) For cashless payment you must issue an invoice by selecting the appropriate payment type during checkout. After issuing an invoice for the product you have chosen, it is reserved for 5 banking days, including the day the invoice is issued. Shipment of goods is made only after receipt of 100% prepayment for the order to the company's settlement account. Upon shipment, we will provide you with the entire set of documents (please note that we work without VAT).

2) Pay for the order in cash(the purchase is made for the organization) . Please note that you must have a power of attorney to receive goods from Tekhnomir LLC, or the seal of the organization. When making a purchase, you will be given a complete set of shipping accounting documents (please note that we work without VAT).

Product Warranty

We strive to solve any problem with the goods purchased in our store as quickly as possible.

In the event of a defect in any product purchased, we undertake to exchange it or refund the full price paid for it during the entire warranty period.

Our store has the following warranty periods for products (if these periods are not indicated directly on the website of a particular product):

Matrices, screens, covers assembled with a matrix, displays, touchscreens, touchscreens assembled with a matrix, inverters, microcircuits, coolers, cables - 3 months from the date of receipt of the goods.

Batteries, power supplies, information storage devices, random access memory, drives- 3 months from the date of receipt.

Cables and accessories, connectors, Consumables - no guarantee.

Return of goods of good quality within 14 (30**) days excluding the day of receipt (including those purchased by mistake)

Any buyer who has bought goods in our store has the right to return or exchange goods of good quality without traces of installation and use within 14 (30**) days after receiving it (it is important for regional buyers to send the goods back by the carrier within 14 (30**) days after receiving). In this case, the goods are replaced with a similar one or a refund of 100% of the amount paid for the goods is made. The cost of delivery, as well as the commission in the case of cash on delivery, are additional services and in warranty obligations not included! Re-sending the desired product is paid additionally.

** Applies to products from sections " Touchscreens (sensors) for tablets and smartphones and " Modules matrix + sensor for tablets and smartphones" due to the need to test them before installation in the device.

To return an item, you must:

Return of a defective (defective) product in case of a defect during the entire warranty period

Any client has the right to exchange a defective product during the entire warranty period, while:

1) the client has the right to receive full cost goods, including the cost of delivery and the amount of cash on delivery, if he wants to return the goods.

2) in case of replacement of goods, delivery of goods (both from the client and to the client) is carried out at our expense.

To exchange goods, you must:
Notify the dispatch data to the manager (name, dispatch method, invoice number, date, etc.)
Provide a copy or original of the invoice confirming the purchase of the goods, the warranty card (or a copy).
Deliver the goods to our office (Moscow) or ensure that the goods are sent to our address from Russia (the method of delivery of the returned goods is agreed with our manager!)
Refunds for the goods are made in a convenient way for you and for us after receiving the goods in agreement with our manager.

Note! The method of returning goods from Russia is agreed with our managers.