Job description of the chief power engineer of the enterprise. Job description of the chief power engineer of a construction organization Chief power engineer job description in construction

A job description is the main document of an employee for any position. All his main duties that he must perform at his workplace are indicated here, depending on the nature of the position held and the specifics of the employer's activities.

The employer is obliged to familiarize the applicant with this document even before the employment contract is signed. After reading the instructions, the employee must sign on the last sheet. This suggests that he knows his duties and will strictly observe them. Only with the signature of an employee can he be brought to disciplinary responsibility for failure to fulfill his job duties.

An instruction is drawn up by specialists from the personnel and legal departments. The document must reflect all the nuances of this position. Not a single employee should perform work in excess of his duties specified in the job description.

Responsibilities of the power engineer

The power engineer belongs to the category of specialists. His job responsibilities include:

• technical supervision of devices that are used at the enterprise;
• provision of preparation of boilers and vessels that operate under pressure, as well as steam and hot water pipelines;
• participation in tests of power networks and installations;
• acceptance into industrial operation of power networks and installations;
• preparation of the necessary materials for the conclusion of contracts for the repair of equipment;
• ensuring the uninterrupted operation of power equipment, electrical and heating networks, air ducts and gas pipelines;
• certification of environmental, energy and electrical installations installed at the enterprise;
• preparation of applications for the purchase of equipment, as well as materials, spare parts;
• control over the rational consumption of fuel and all types of energy;
• provision and testing of relay protection and automation equipment;
• control over the repair and reconstruction of power equipment;
• development and implementation of technical regulations and standards for the energy equipment used at the enterprise;
• preparation of reports in accordance with the established forms;
• compliance with the rules and regulations of safety and labor protection.

9.2 Responsibilities of the power engineer

Provides uninterrupted power supply to construction sites, subsidiary industries and service farms of the organization. Organizes the operation and repair of power equipment, control over the economical consumption of energy. Carries out planning work of power facilities and shops, development of plans for the production and consumption of electricity, fuel, steam, gas, water, compressed air; fuel consumption rates and all types of energy, as well as drawing up applications and calculations for the purchase of equipment, materials, spare parts necessary for the operation of energy facilities. Takes part in the development of a plan for the future development of the organization's production base. Draws up technical specifications for the design of new and reconstruction of existing energy facilities. Supervises instrumentation, electrical and heat engineering devices. Organizes timely submission to the State Energy Supervision Inspection of boilers and pressure vessels. Carries out control over the observance of labor protection rules. Conducts inventory control of the availability and movement of power equipment located in the construction organization, as well as accounting and analysis of electricity and fuel consumption, technical and economic indicators of the energy sector. Participates in the consideration of the causes of accidents in power equipment and develops measures for their elimination and prevention. Develops measures to prepare power plants for operation in winter conditions and monitors their implementation. Provides the introduction of the scientific organization of labor in the areas of the energy sector, new progressive methods of operation and repair. Participates in the work of the commission for certification of workplaces. Gives an opinion on rationalization proposals and inventions related to the improvement of equipment, and organizes the implementation of the accepted proposals. Conducts industrial briefing of workers with protective equipment and devices.

Must know: decrees, orders, orders, higher authorities, methodological, regulatory and other guidelines for the operation of power equipment and communications; organization of the energy economy; technical characteristics, design features, purpose, operating modes of power equipment, rules for its technical operation and repair technology; science achievements; advanced domestic and foreign experience in the field of energy production services; fundamentals of economics, organization of production, labor and management, fundamentals of labor legislation; norms and rules of labor protection, safety, industrial sanitation and fire protection.

Qualification requirements.

Power engineer of the 2nd category: higher technical education and work experience in construction organizations in the position of power engineer or other engineering and technical positions replaced by specialists with higher education, at least 3 years.

Power engineer: higher technical education without any requirements for work experience or secondary specialized education and work experience in the position of a power engineer for at least 3 years or in other positions replaced by specialists with secondary specialized education for at least 5 years.

When carrying out transport and handling operations in construction, the building materials industry and the construction industry, depending on the type of vehicles, along with the requirements of these rules and regulations, the rules on labor protection in road transport, intersectoral labor protection rules and state standards must be observed.

Vehicles and equipment used for loading and unloading operations must correspond to the nature of the processed cargo.

Sites for loading and unloading operations should be planned and have a slope of no more than 5 °, and their size and coverage should correspond to the project for the production of works. In the appropriate places, it is necessary to install the inscriptions: "Entry", "Exit", "U-turn", etc.

Slopes and ascents in winter should be cleared of ice and snow and covered with sand or slag.

Overpasses from which bulk cargo are unloaded must be designed with a certain margin of safety to withstand the full load of a truck of a certain brand, equipped with indicators of permissible carrying capacity, and must also be fenced from the sides and equipped with wheel deflectors.

The movement of vehicles in the production area, loading and unloading areas and access roads to them should be regulated by generally accepted road signs and signs.

When placing cars on loading and unloading platforms, the distance between cars standing one behind the other (in depth) must be at least 1 m, and between cars standing next to each other (along the front) - at least 1.5 m.

If vehicles are installed for loading or unloading near a building, an interval of at least 0.5 m must be maintained between the building and the tailgate of the vehicle (or the rear point of the suspended load).

When performing loading and unloading operations, it is necessary to comply with the requirements of the legislation on the maximum norms for carrying weights and the admission of workers to perform these works.

10.2 Safety requirements for handling processes

The illumination of the premises and areas where loading and unloading operations are carried out must comply with the requirements of the relevant building regulations.

Loading and unloading operations should be carried out, as a rule, in a mechanized way using lifting and transporting equipment and under the guidance of a person appointed by order of the head of the organization responsible for the safe performance of work by cranes.

The person responsible for the production of loading and unloading works is obliged to check the serviceability of lifting mechanisms, rigging, devices, scaffolds and other handling equipment, as well as explain to employees their responsibilities, the sequence of operations, the meaning of the signals given and the properties of the material submitted for loading (unloading).

A mechanized method of loading and unloading is mandatory for loads weighing more than 50 kg, as well as when lifting loads to a height of more than 2 m.

In places where loading and unloading operations are performed and in the area of ​​operation of lifting machines, it is prohibited to find persons who are not directly related to these works.

The presence of people and the movement of vehicles in the areas of possible collapse and fall of goods are prohibited.

In cases of unequal floor heights of the vehicle body and platform, ladders should be used.

Employees admitted, based on the results of the medical examination, to perform work on loading (unloading) dangerous and especially dangerous goods, provided for by the relevant state standards, must undergo special occupational safety training with subsequent certification, as well as know and be able to apply first aid techniques.

Loading and unloading operations with bulk, dusty and hazardous materials should be carried out with the use of mechanization equipment and the use of personal protective equipment appropriate to the nature of the work performed.

10.3 Safety requirements for the use of continuous machines

Technological lines, consisting of several sequentially installed and simultaneously operating means of continuous transport (conveyors, conveyors, etc.), must be equipped with:

a) two-way signaling with all control posts;

b) blocking of equipment drives, which provides automatic shutdown of that part of the technological line that loads the stopped or stopped unit.

When performing loading and unloading operations using continuous machines, the following requirements must be met:

Stowage of loads must ensure uniform loading of the working body and stable position of the load;

The supply and removal of cargo from the working body of the machine must be carried out using special feeding and receiving devices.

During the operation of the belt conveyor, it is prohibited:

Eliminate slipping of the belt on the drum by throwing sand, clay, rosin, bitumen and other materials into the area between the belt and the drum;

Clean support rollers, drums of drive, tension and end stations, remove spillage from under the conveyor;

Move support rollers, tension and align the conveyor belt manually.

The performance of these works should be carried out only when the conveyor is completely stopped and disconnected from the network with the fuses removed and the closed starting device, on which prohibiting safety signs "Do not turn on - people are working!" Must be posted.

It is forbidden to start up the belt conveyor when the passages are littered and cluttered, as well as in the absence or failure of:

Fencing of drive, tension and end drums;

Rope switch;

Grounding of electrical equipment, cable armor or conveyor frame.

The speed of the conveyor belt during manual handling should not exceed 0.5 m / s with a weight of the handled load up to 5 kg and 0.3 m / s with a larger weight.

To prevent spillage of the transported raw materials and the formation of dust in production areas, the covers and chutes of screw conveyors must be sealed.

It is prohibited:

Open the covers of screw conveyors before stopping them and taking measures against the involuntary start of the conveyor, and also walk on the covers of this equipment;

Push the transported material or objects that have accidentally entered the conveyor and take samples for laboratory analysis while the screw conveyor is in operation;

Operate the screw conveyor when the screw touches the walls of the casing, with faulty covers and faulty seals.

During the operation of suspended carts, pushing conveyors, measures must be taken to prevent the fall of materials and products during their transportation.

Conveyors must be equipped with devices that disconnect drives when the conveyor is overloaded.

Before starting up the newly mounted or overhauled conveyors, the traction elements and overhead grippers must be tested for 15 minutes under a double working load.

Attachments of overhead conveyors should provide ease of installation and removal of transported goods.

Drive and swivel sprockets of cradle conveyors, gears and drive couplings must have solid metal or mesh fences.

In places of constant passage of people and the passage of vehicles, metal nets should be installed under the conveyor track to catch the goods falling from the conveyor.

The height of the installation of the nets from the surface of the ground should correspond to the dimensions of the vehicles used and ensure the free passage of people.

When carrying out work on the transportation of goods by road transport in construction, the building materials industry and the construction industry, along with the requirements of these rules and regulations, the requirements of the Road Traffic Rules, approved by the Resolution of the Council of Ministers - the Government of the Russian Federation of October 23, 1993 No. 1090, must be observed, and See also cross-sectoral and sectoral OSH regulations.

To organize the movement of vehicles on the production site, schemes for the movement of vehicles and the main routes of movement for workers should be developed and installed in prominent places.

When working on road transport, you must:

Observe measures of careful handling of sources of fire, high temperatures;

Control the parameters of the gas-air environment, preventing them from reaching the threshold values, etc.;

Avoid fuel spills and leaks, open emission of fuel vapors.

Only hot air, hot water or steam may be used to warm up the engine and power supply system, remove ice formations and plugs.

It is not allowed to use an open fire to warm up the components of a machine or a vehicle, as well as to operate machines in the presence of leaks in fuel and oil systems.

The manager is obliged to inform the driver before leaving the line about the working conditions on the line and the peculiarities of the transported cargo.

The device and maintenance of temporary and permanent electrical networks in the production area should be carried out by electrical personnel with an appropriate qualification group for electrical safety.

Switches, knife switches and other electrical switching devices used outdoors or in wet shops must be protected in accordance with the requirements of GOST 14254.

All electric starting devices must be placed so that unauthorized persons cannot start machines, mechanisms and equipment. It is forbidden to turn on several pantographs with one starting device.

Distribution boards and circuit breakers must have locking devices.

Live parts of electrical installations must be insulated, fenced or placed in places inaccessible to accidental contact with them.

1. Dobronravov S.S. "Construction machines" reference book

2. Bauman V.I. "Construction machines" 1 part

3. Koroteev D.V. "Handbook of the master builder", M 1989

4. V.D. Martynov, N.I. Aleshin, B.P. Morozov "Construction machines and assembly equipment", M 1990

6. SNiP III-4-80 * "Safety in construction"

7. SNiP 12-03-2001 "Labor safety in construction"

We bring to your attention a typical example of a job description for an energy engineer, sample 2019/2020. A person with a higher professional (technical) education and work experience in the specialty in engineering and technical positions for at least 3 years or secondary vocational (technical) education and work experience in the specialty in engineering and technical positions for at least 5 years can be appointed to this position. ... Do not forget, each instruction of an energy engineer is handed out against a receipt.

The following figure provides typical information about the knowledge that an energy engineer should have. About duties, rights and responsibilities.

This material is included in the huge library of our site, which is updated daily.

1. General Provisions

1. Power engineer belongs to the category of specialists.

2. A person with a higher professional (technical) education and work experience in the specialty in engineering and technical positions for at least 3 years or secondary vocational (technical) education and work experience in the specialty in engineering and technical positions at least 5 years.

3. An energy engineer is hired and dismissed by the director of the organization.

4. Power engineer should know:

- decrees, orders, orders, methodological and normative materials for the operation of power equipment and communications;

- organization of the energy sector;

- prospects for the technical development of the enterprise;

- technical characteristics, design features, operating modes and rules of technical operation of power equipment;

- Unified system of preventive maintenance and rational equipment operation;

- organization of an energy engineer for repair work;

- methods of installation, adjustment, adjustment and repair of power equipment;

- the procedure for drawing up applications for energy resources, equipment, materials, spare parts, tools;

- rules for handing over equipment for repair and acceptance after repair;

- fundamentals of an energy engineer for the production of an enterprise's products;

- labor organization requirements for the operation, repair and modernization of power equipment;

- advanced domestic and foreign experience in the operation and repair of power equipment;

- fundamentals of economics, organization of production, labor and management;

- fundamentals of labor legislation;

- internal labor regulations;

- rules and norms of labor protection, safety, industrial sanitation and fire protection.

5. In his activities, an energy engineer is guided by:

- the legislation of the Russian Federation,

- the Charter of the organization,

- orders and orders of employees to whom he is subordinate in accordance with this instruction,

- this job description,

- The rules of the internal labor regulations of the organization.

6. The power engineer reports directly to the chief power engineer.

7. During the absence of an energy engineer (business trip, vacation, illness, etc.), his duties are performed by a person appointed by the director of the organization in accordance with the established procedure, who acquires the corresponding rights, duties and is responsible for the performance of the duties assigned to him.

2. Job responsibilities of an energy engineer

Energy Engineer:

1. Ensures uninterrupted operation, correct operation, repair and modernization of power equipment, electrical and heating networks, air and gas pipelines.

2. Determines the need of production for fuel and energy resources, prepares the necessary justifications for technical re-equipment, development of energy facilities, reconstruction and modernization of energy supply systems.

3. Draws up applications for the purchase of equipment, materials, spare parts necessary for the operation of the energy sector, performs calculations with the necessary justifications for measures to save energy resources, the needs of the company's divisions in electrical, thermal and other types of energy, participates in the development of norms for their consumption, the operating mode of divisions enterprises based on their energy needs. Monitors compliance with fuel consumption and all types of energy.

4. Draws up schedules for reducing energy loads during the hours of maximum loads of the power system and ensures their implementation within the limits specified for the unit of the enterprise, carries out certification of power, electrical and environmental installations installed at the enterprise.

5. Participates in testing and acceptance of power plants and networks into commercial operation, in considering the causes of accidents in power equipment and develops measures to prevent them, create safe working conditions.

6. Organizes inspection and testing of relay protection and automation equipment.

7. Carries out technical supervision of instrumentation, electrical and heat engineering devices used at the enterprise, and also provides preparation of boilers, pressure vessels, steam and hot water pipelines, electrical installations and other energy facilities for commissioning, inspection and certification bodies of state supervision.

8. Carries out control over the observance of instructions for operation, maintenance and supervision of energy equipment and electrical networks.

9. Participates in the development and implementation of standards and specifications for power equipment.

10. Prepares the necessary materials for the conclusion of contracts for the repair of equipment with contractors.

11. Carries out control over the implementation of capital and other repairs of power equipment.

12. Studies and summarizes the best domestic and foreign experience in the rational use and saving of fuel and energy resources.

13. Ensures compliance with the rules and regulations of labor protection during the operation and repair of power plants and networks.

14. Prepares reports on the approved forms and indicators.

15. Complies with the Internal Labor Regulations and other local regulations of the organization.

16. Complies with internal marketing, safety, industrial hygiene and fire protection rules and regulations.

17. Ensures the observance of cleanliness and order in his workplace,

18. Fulfills, within the framework of the employment contract, the orders of the employees to whom he is subordinate in accordance with this instruction.

3. Rights of an energy engineer

An energy engineer has the right to:

1. Submit proposals to the director of the organization:

- to improve the work related to the obligations provided for by this instruction,

- on the encouragement of distinguished workers subordinate to him,

- on bringing to material and disciplinary responsibility of employees subordinate to him who violated production and labor discipline.

2. To request from the structural divisions and employees of the organization the information necessary for him to perform his duties.

3. To get acquainted with the documents defining his rights and obligations in the position held, the criteria for assessing the quality of the performance of official duties.

4. To get acquainted with the draft decisions of the management of the organization concerning its activities.

5. Require the management of the organization to provide assistance, including the provision of organizational and technical conditions and the execution of the established documents necessary for the performance of official duties.

6. Other rights established by the current labor legislation.

4. Responsibility of the power engineer

The power engineer is responsible in the following cases:

1. For improper performance or non-performance of their official duties provided for by this job description - within the limits established by the labor legislation of the Russian Federation.

2. For offenses committed in the course of their activities - within the limits established by the current administrative, criminal and civil legislation of the Russian Federation.

3. For causing material damage to the organization - within the limits established by the current labor and civil legislation of the Russian Federation.

The job description of an energy engineer is a sample of 2019/2020. Responsibilities of an energy engineer, rights of an energy engineer, responsibility of an energy engineer.

The chief power engineer of an enterprise is a leading position, therefore, only the director of the organization in which he got a job can accept or dismiss the employee who occupies it. To be hired, a candidate must have a higher technical education. In addition, it should be borne in mind that enterprises can be engaged in different activities in different industries and be responsible for different market sectors. An employee planning to get such a position must have a long work experience, at least five years. Moreover, this experience must correspond to the industry in which the enterprise operates. And the employee must work these years either in a managerial position or in an engineering and technical position. The chief power engineer reports directly to the director of the organization.

What is guided by

A person who has received the position of "chief power engineer" must first of all be guided by legislative and regulatory documents aimed at regulating the energy service of the enterprise.

Also, at his disposal should be provided methodological materials concerning the issues of his immediate activities. The chief power engineer is obliged to comply with the charter of the enterprise, always be at the workplace. He has no right to violate the work schedule. Obeying the chief director, he is obliged to carry out all his orders and orders. He must also be guided by all the rules that the job description of the chief power engineer contains.

What should I know

When starting to perform the duties of a chief power engineer, an employee must learn and understand all the provisions of the Labor Code, orders and orders of his superiors, familiarize himself with the methodological and regulatory materials related to the energy service of this enterprise. Naturally, to understand what kind of profile the organization has, what is the specificity of its activities. It is also important to understand the structure of the enterprise and the possible ways of its development.

Chief Power Engineer: Requirements

An employee in this position needs to know the basics of technology, how exactly products are manufactured at the enterprise, how the provision of electricity to production workshops and other places is organized, how the system of preventive maintenance works is arranged and how to rationally use the resources of the enterprise's equipment. Knowledge of the rules for operating devices that use electricity, their technical characteristics and production capacity is required.

Production

The chief power engineer should be aware of what methods are used to plan the operation of the equipment, what is the order of turning them on and off, and on what schedule it is necessary to carry out repair work. The chief power engineer must be able to develop and execute technical documentation in accordance with instructions, regulations and other materials of a governing type. Know how the reception and delivery of equipment is carried out after use and repair work. Understand what can harm the environment and avoid it.

Equipment

If the equipment is being modernized, as well as its operation or repair, the chief power engineer must know all the requirements of the management in this regard. Also, the person holding this position must have information:

• how much fuel and energy should be consumed for the operation of shops and the enterprise as a whole;
• how to enter into agreements with other organizations to obtain any materials in order to supply the organization with electricity and other types of energy necessary for normal operation.

Also, the chief power engineer is supposed to know the labor legislation of the country, the basics of organizing production, economics and management. The instructions on labor protection for the chief power engineer, safety precautions, fire protection and industrial sanitation standards must be followed.

Deputy Chief Power Engineer

If an employee holding the position of the chief power engineer is absent from work, his duties are automatically taken over by a deputy, who is appointed either by the power engineer himself or by higher management. At the same time, the deputy is fully responsible for his actions and the correct performance of duties for the period of absence of the chief power engineer.

Functions

The main function of an employee holding the position of "chief power engineer" is to organize work aimed at providing energy services to the organization. According to the job description, the person holding the described position is responsible for the periodic professional development of all subordinates. The chief power engineer must ensure healthy and safe working conditions for his staff, as well as monitor the work activities of subordinates and their compliance with all necessary regulations and rules.

Responsibilities

To perform their functions fully, the employee must strictly fulfill the duties of the chief power engineer. At each enterprise, the working conditions and requirements may be different, but there are basic ones that relate to any areas of enterprise activity. The chief power engineer must ensure that all repair work with power equipment is carried out correctly and on time, control the saving of energy resources in the organization.

He is also responsible for the uninterrupted supply of electricity, water, steam, gas and other resources on which the continuity of the production process depends.

Also, the duties of the chief power engineer include the management of planning the work of energy facilities, scheduling the repair work of power grids and equipment, and calculating the consumption of energy resources. He must calculate and draw up bids, which will contain information on the need to purchase parts or equipment, as well as other materials necessary to maintain the operation of the energy systems of the enterprise. The person in this position must make calculations about minimizing energy consumption and increasing the productivity of equipment.

If the organization plans to reconstruct or modernize power equipment, the chief power engineer is obliged to participate in drawing up plans in this regard and monitor the implementation of all necessary work to modernize the devices. After its completion, he must participate in checking the system, conduct all the necessary tests and check if everything is working properly.

He monitors and carries out work aimed at protecting underground communications, checks the operation of communications, protective alarm systems and reports to government agencies for the operation of all devices operating under pressure. The responsibilities also include carrying out activities for the exchange of experience and knowledge regarding the operation, repair and installation of power equipment. The Chief Power Engineer is responsible for the work and supervises all departments and employees, ensuring the smooth operation of all power plants.

Rights

The job description of the chief power engineer includes the rights that are vested in the representative of this position. He has the right to represent the interests of the organization to competing or cooperating companies when it comes to energy services, or on other issues related to energy supply. He can also present to his superiors plans and proposals to improve the efficiency of his departments and employees. Offer to improve the use of energy resources, organize events aimed at reducing fuel consumption and improving the performance of equipment in the organization. Sighting and signing of documents are also available to the chief power engineer, but only within the limits of his official department. In addition, he has the right to receive reports and other information from employees that is necessary for him to work.

Personnel issues are also in his competence. He can suggest to the management to dismiss, transfer or appoint employees based on personal considerations, based on observation and experience. It is in his right to encourage employees or, on the contrary, to charge them with fines for poor performance of duties. And the last thing is that the chief power engineer has the right to ask the authorities for assistance if, for some reason, he himself is not able to fulfill these or those duties.

Responsible work

The chief power engineer bears full responsibility for his actions. If he performs his duties poorly or ignores them altogether, he may receive a punishment prescribed in the Labor Code of the country for such cases. He can also incur criminal or administrative liability if he breaks the law in the process of performing his official duties or his actions cause material damage to the enterprise. Depending on the amount of damage caused, the degree of punishment will be determined.

Career

Employees applying for the position of Chief Power Engineer are needed in a variety of companies. Basically, of course, representatives of this profession are required in enterprises that manufacture products for various market segments. Before compiling a resume for the chief power engineer, it is advisable to decide in which particular area you want to work. Indeed, it is important for every enterprise that their future employee not only understands the work of the company, but also has experience with such equipment.

Since this position is a leading one, few people manage to start their careers with it. First you need to go through the path of promotions and gain experience. Basically, this position is hired by specialists who have experience in leadership positions for at least five years. And if we take into account also the previous experience in ordinary positions, then it turns out that employers are turning their attention to specialists over forty years old.

In addition, a prerequisite for hiring is the presence of a higher technical education. Naturally, the requirements in each organization are individual, but generally employers prefer experienced, educated specialists who know their business and are able to manage the staff or even departments involved in providing the enterprise with electricity and other fuel resources, as well as responsible for the repair, maintenance and modernization of equipment required for the production activities of the company.

I APPROVE:

________________________

[Job title]

________________________

________________________

[Name of company]

________________/[FULL NAME.]/

"____" ____________ 20__

JOB DESCRIPTION

Chief Power Engineer of a Construction Organization

1. General Provisions

1.1. This job description defines and regulates the powers, functional and job responsibilities, rights and responsibilities of the chief power engineer of the construction organization [Organization name in the genitive case] (hereinafter - the Company).

1.2. The chief power engineer of a construction organization belongs to the category of managers, is appointed and dismissed in accordance with the procedure established by the current labor legislation by order of the head of the Company.

1.3. The chief power engineer of a construction organization reports directly to the head of the Company.

1.4. A person who has:

• higher professional education in the specialty "Power supply of enterprises", "Electrical equipment and electrical facilities of enterprises, organizations and institutions", "Electrical power engineering", "Electrical engineering, electromechanics and electrotechnology" or higher professional technical education and professional retraining in the direction of professional activity;
• work experience in the direction of professional activity for at least 5 years;
• advanced training at least once every 5 years and the availability of a qualification certificate for compliance with the position held.

1.5. The chief power engineer of a construction organization should know:

• laws and other regulatory legal acts of the Russian Federation in the field of energy;
• administrative, methodological and regulatory documents for energy services and energy audit in a construction organization;
• profile, specialization and features of the organizational and technological structure of a construction organization, prospects for its development;
• fundamentals of production technology for construction products of a construction organization;
• organization of energy supply for production in construction and in a construction organization;
• Unified system of preventive maintenance and rational equipment operation;
• production capacities, technical characteristics, design features and modes of operation of power equipment, installations using energy, rules for their operation;
• the procedure and methods for planning the operation of equipment and the production of repair work;
• regulations, instructions and other guiding documents for the development and execution of technical documentation;
• rules for acceptance and delivery of equipment after installation and repair;
• environmental legislation;
• requirements for the rational organization of labor during the operation, repair and modernization of power equipment;
• the procedure for the development of norms for the consumption of fuel and energy resources;
• the procedure for concluding contracts for the supply of a construction organization with electricity, steam, water and other types of energy;
• advanced domestic and foreign experience in the field of power supply of production;
• fundamentals of economics, organization of production, labor and management;
• fundamentals of labor legislation;
• labor protection rules.

1.6. The chief power engineer of a construction organization in his activities is guided by:

• local acts and organizational and administrative documents of the Company;
• internal labor regulations;
• rules of labor protection and safety measures, ensuring industrial sanitation and fire protection;
• instructions, orders, decisions and instructions of the immediate supervisor;
• this job description.

1.7. During the period of temporary absence of the chief power engineer of a construction organization, his duties are assigned to [the name of the position of the deputy], who is appointed in the prescribed manner, acquires the corresponding rights and is responsible for non-fulfillment or improper fulfillment of the duties assigned to him in connection with the replacement.

2. Job responsibilities

The chief power engineer of a construction organization performs the following duties:

2.1. It organizes the operation and repair of energy and environmental protection equipment and power systems, the provision of production with electricity, steam, gas, water and other types of energy, control over the consumption of energy resources in a construction organization, consistent observance of the saving regime.

2.2. Supervises the organization and planning of the work of power shops and farms, the development of schedules for the repair of power equipment and power grids, plans for the production and consumption of the organization of electricity, process fuel, steam, gas, water, compressed air, consumption rates and modes of consumption of all types of energy.

2.3. Provides the preparation of applications and the necessary calculations for them for the purchase of energy equipment, materials, spare parts, for the supply of the organization of electrical and thermal energy and the connection of additional power to enterprises supplying energy, the development of measures to reduce the consumption of energy resources, the introduction of new technology that contributes to more reliable , economical and safe operation of power plants, as well as increasing labor productivity.

2.4. Participates in the development of plans for the future development of the energy sector, plans to improve production efficiency, in the preparation of proposals for the reconstruction, technical re-equipment of the organization, the introduction of comprehensive mechanization and automation of production processes, in the consideration of projects for the reconstruction and modernization of the energy supply systems of the organization and its divisions, in the preparation of technical specifications for design of new and reconstruction of existing energy facilities.

2.5. Gives opinions on the developed projects, participates in testing and acceptance of power plants and networks for industrial operation.

2.6. Ensures the performance of work on the protection of underground structures and communications, organizes the inspection of communication equipment, signaling, accounting, control, protection and automation, as well as the timely presentation of boilers and pressure vessels to the authorities exercising state technical supervision.

2.7. Organizes the development of measures to improve the efficiency of the use of fuel and energy resources, the reliability and efficiency of the operation of power plants, the prevention of accidents, the creation of safe and favorable working conditions during their operation.

2.8. Monitors compliance with labor protection and safety regulations, instructions for the operation of power plants and the use of power equipment and networks.

2.9. Concludes contracts with third-party organizations for the supply of the organization with electricity, steam, water and other types of energy, controls their implementation.

2.10. Organizes storage, accounting for the presence and movement of energy equipment located in the organization, as well as accounting and analysis of electricity and fuel consumption, technical and economic indicators of the energy sector, accidents and their causes.

2.11. Carries out work on the exchange of experience in the field of operation of power equipment, economy and rational use of fuel and energy resources, contributes to the achievement of high performance in the operation of power plants.

2.12. It ensures the improvement of the organization of labor in the areas of the energy sector, the certification and rationalization of workplaces, the introduction of new progressive methods of repair and operation of energy equipment.

2.13. Gives opinions on rationalization proposals and inventions concerning the improvement of power equipment and power supply, organizes the implementation of the adopted proposals.

2.14. Supervises the employees of the department and divisions of the organization that provide energy services to production, organizes work to improve the qualifications of employees.

In case of official necessity, the chief power engineer of a construction organization may be involved in the performance of his official duties overtime, in the manner prescribed by the provisions of federal labor legislation.

3. Rights

The chief power engineer of a construction organization has the right to:

3.1. Participate in the discussion of draft decisions of the head of the company.

3.2. To dispose of the financial resources and property entrusted to him in compliance with the requirements determined by legislative and regulatory legal acts, the charter of the organization.

3.3. Sign and endorse documents within their competence.

3.4. Initiate and hold meetings on organizational and financial and economic issues.

3.6. Conduct quality checks and timely execution of orders.

3.7. Demand the termination (suspension) of work (in case of violations, non-compliance with established requirements, etc.), compliance with established norms, rules, instructions; give instructions for correcting deficiencies and eliminating violations.

3.8. Submit to the head of the company for consideration the idea of ​​hiring, relocating and dismissing employees, on rewarding outstanding employees and on the application of disciplinary sanctions to employees who violate labor discipline.

3.9. Participate in the discussion of issues related to the duties performed by him.

3.10. Require the head of the company to assist in the performance of their duties and rights.

4. Responsibility and performance evaluation

4.1. The chief power engineer of a construction organization bears administrative, disciplinary and material (and in some cases stipulated by the legislation of the Russian Federation - and criminal) responsibility for:

4.1.1. Failure to comply or improper fulfillment of the official instructions of the immediate supervisor.

4.1.2. Failure to perform or improper performance of his labor functions and the tasks assigned to him.

4.1.3. Misuse of the granted official powers, as well as their use for personal purposes.

4.1.4. Inaccurate information about the status of the work entrusted to him.

4.1.5. Failure to take measures to suppress the identified violations of safety regulations, fire safety and other rules that pose a threat to the activities of the enterprise and its employees.

4.1.6. Failure to enforce labor discipline.

4.2. Evaluation of the work of the chief power engineer of a construction organization is carried out:

4.2.1. Immediate supervisor - regularly, in the process of the employee's daily performance of his labor functions.

4.2.2. The attestation commission of the enterprise - periodically, but at least once every two years, based on the documented results of the work for the evaluation period.

4.3. The main criterion for evaluating the work of the chief power engineer of a construction organization is the quality, completeness and timeliness of his performance of the tasks provided for in this instruction.

5. Working conditions

5.1. The mode of operation of the chief power engineer of a construction organization is determined in accordance with the internal labor regulations established by the Company.

5.2. Due to production needs, the chief power engineer of a construction organization is obliged to go on business trips (including local ones).

5.3. To resolve operational issues related to production activities, the chief power engineer of a construction organization may be assigned a service vehicle.

6. Authority to sign

6.1. To ensure his activities, the chief power engineer of a construction organization is given the right to sign organizational and administrative documents on issues attributed to his competence by this job description.

Acquainted with the instructions ____ / ____________ / "__" _______ 20__